You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Additive Manufacture of Refractory Metal Propulsion Components

    SBC: Geoplasma, LLC            Topic: T9

    Niobium alloy (C-103) reaction control system (RCS) chambers have been used on numerous NASA programs. However at elevated temperatures, the strength of C-103 decreases significantly. Higher strength niobium alloys have been developed, but these alloys lack the formability of C-103. Recently, Additive Manufacture (AM) of niobium and C-103 has been demonstrated using powder bed electron beam me ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  2. Advanced Gas Sensing Technology for Space Suits

    SBC: Intelligent Optical Systems, Inc.            Topic: T6

    The gas sensor in the PLSS of the ISS EMU will meet its projected life in 2020, and NASA is planning to replace it. At present, only high TRL devices based on infrared absorption are candidate replacements, because of their proven long-term stability, despite their size and power consumption and failures in the presence of liquid water. No current compact sensor has the tolerance for liquid water ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  3. Advanced Li/CFx Primary Batteries with Non-Flammable Electrolytes

    SBC: CFX BATTERY, INC.            Topic: T601

    NASA seeks to develop high specific energy primary batteries that are safe and capable of performing under a wide temperature range, for manned space missions. To meet this goal, CFX Battery Inc. proposes to develop, characterize, and establish technological feasibility of a new Li/SF-CFx based high capacity lithium primary battery that offers higher rate capability and enhanced safety than conven ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  4. Advanced Simulation Framework for Design and Analysis of Space Propulsion Systems

    SBC: STREAMLINE NUMERICS, INC.            Topic: T901

    The innovation proposed here is a high-performance, high-fidelity framework in the computational fluid dynamics (CFD) code called Loci-STREAM to enable accurate, fast and robust simulations of unsteady multiphase flows such as combustion involving liquid-gas phases in liquid rocket injectors and solid-gas phases in solid rocket motors, and cryogenic cavitation in delivery systems of liquid rocket ...

    STTR Phase II 2010 National Aeronautics and Space Administration
  5. Advanced Structural Health Monitoring System for Comprehensive Real-Time Vehicle Characterization

    SBC: AMERICAN GNC CORPORATION            Topic: T1

    In providing an innovative solution to improving information technologies and health management systems, AGNC is proposing a significant technological achievement with the Advanced Structural Health Monitoring System for Comprehensive Real-Time Vehicle Characterization. During in-flight conditions, this system is able to not only provide the status of information such as regarding the flight envel ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  6. Advanced Unsteady Turbulent Combustion Simulation Capability for Space Propulsion Systems

    SBC: STREAMLINE NUMERICS, INC.            Topic: T901

    The innovation proposed here is a high performance, high fidelity simulation capability to enable accurate, fast and robust simulation of unsteady turbulent, reacting flows involving cryogenic propellants (such as LOX/LH2 and LOX/LCH4). The key features of this proposed capability are: (a) Hybrid RANS-LES (HRLES) methodology, and (b) flamelet modeling for turbulent combustion incorporated in a pr ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  7. Air Vehicle Gust Response analysis for Conceptual Design

    SBC: Research In Flight, LLC            Topic: T15

    Research in Flight (RIF) and Auburn University are offering the development of an advanced, robust tool and methodology that allows the simulation and modeling of gust and wake vortex encounters for Distributed Electric Propulsion (DEP) enabled Urban Air Mobility (UAM) vehicle concepts. DEP enabled UAM concepts offer the potential for large performance improvements by exploiting favorable synergie ...

    STTR Phase I 2019 National Aeronautics and Space Administration
  8. A Modular In-Situ Curing Apparatus for Thermoset Resin Mixtures Applied as Thermal Protection Systems

    SBC: Intelligent Optical Systems, Inc.            Topic: T12

    Future human extraterrestrial missions will require export and landing of countless payloads on the lunar and Martian surfaces. Such a quantity and rate of payload delivery will require cost-effective and rapid manufacturing of many large Thermal Protection Systems (TPS). IOS proposes to develop a modular system for in-situ bonding and curing of thermoset resin to the spacecraft structure to facil ...

    STTR Phase I 2019 National Aeronautics and Space Administration
  9. An Additive Manufacturing Technique for the Production of Electronic Circuits

    SBC: MORNINGBIRD MEDIA CORPORATION            Topic: T12

    Under the support of a FY 2016 NASA Phase I Small Business Technology Transfer (STTR) contract (NASA contract number NNX16CM40P), Morningbird Media Corporation in collaboration with Alabama A&M University Research, Innovation in Science and Engineering (AAMU-RISE) Foundation, has devised a unique method for an additive manufacturing technique for the direct 3D printing of functional electronics. T ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  10. An End-To-End Microfluidic Platform for Engineering Life Supporting Microbes in Space Exploration Missions

    SBC: HJ Science & Technology, Inc.            Topic: T6

    HJ ScienceTechnology (HJST) and Lawrence Berkeley National Laboratory (LBNL) propose a highly integrated, programmable, and miniaturized microfluidic automation platform capable of running rapid and complex synthetic biology and bioengineering processes for engineering life supporting microbes in space exploration missions. Our approach combines the microfluidic automation technology of HJST with ...

    STTR Phase II 2019 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government