You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Innovative Mitigation of Radiation Effects in Advanced Technology Nodes

    SBC: MICROELECTRONICS RESEARCH DEVELOPMENT CORPORATION            Topic: DTRA16A003

    Micro-RDC has developed portable radiation effects test structures that scale to new process nodes.These structures will enable the investigation of the effects of radiation on the new technology from the material processing level as well as the circuit level.Fabricating the chosen structures and the refinement of software to extract the model parameters will be completed in this effort.A suite of ...

    STTR Phase II 2018 Department of DefenseDefense Threat Reduction Agency
  2. Dynamic virtual moulage based on thin film adhesive displays

    SBC: ARCHIE MD INC.            Topic: DHA17A002

    Providing Army combat medics with meaningful experience in treatment of battlefield injuries is a particular challenge. Moulage has the potential to assist in acquiring what could otherwise be very hard-to-come-by preparatory experience for distressing real-life emergencies medics and soldiers may encounter in the field. However, current approaches to moulage are limited in their ability to reflec ...

    STTR Phase II 2018 Department of DefenseDefense Health Agency
  3. New Flexible FR Polyurethane Foams for Energy Absorption Applications

    SBC: Gordon Nelson and Associates            Topic: T703

    Project involves development of new flexible FR polyurethane (PU)insulation foams through a non-toxic environmentally friendly composite approach. Foams have bound-in polymeric phosphonate FRs, with added synergists and smoke suppressants. Such foams will not leach FR. Foams have fine cell structure and excellent flexible foam properties. Cone performance of the identified foam family (368 peak ...

    STTR Phase II 2013 National Aeronautics and Space Administration
  4. Metal Digital Direct Manufacturing (MDDM) for Close-Out of Combustion Chambers and Nozzle Fabrications

    SBC: Keystone Synergistic Enterprises, LLC            Topic: T12

    This NASA sponsored STTR project will investigate methods for close-out of large, liquid rocket engine, nickel or stainless steel nozzle, coolant channels utilizing robotic laser and pulsed-arc additive manufacturing (AM)methods. Structural jacket to coolant channel land area interface strength will be quantified and metallurgical characterization completed.Process optimizations will be conducted ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  5. Highly Efficient Closed-Loop CO2 Removal System for Deep-Space ECLSS

    SBC: TDA RESEARCH, INC.            Topic: T6

    TDA Research Inc.(TDA) in collaboration with University of Puerto Rico – Mayaguez (UPRM is proposing to develop a highly efficient CO2 removal system based on UPRM proprietary strontium exchanged silico-alumino-phosphate (Sr-SAPO-34) sorbent for closed loop space craft cabin air re-vitalization during deep space missions. In the Phase I work, we successfully completed bench-scale proof-of-concep ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  6. Highly Sensitive Flash LADAR Camera

    SBC: VOXTEL, INC.            Topic: T9

    To address the urgent need for 3D flash-lidar technology for landing on solar system bodies and for spacecraft rendezvous and docking with satellites, an effort is proposed to fabricate, characterize, and test a versatile, high-sensitivity InGaAs APD 3D flash lidar and to advance the technology-readiness level (TRL) of lidar technologies suitable for NASA mission requirements. Leveraging an existi ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  7. uG-LilyPond- Floating Plant Pond for Microgravity

    SBC: SPACE LAB TECHNOLOGIES, LLC            Topic: T7

    Regenerative space life support will undoubtedly require food production, to recover nutrients and close the carbon loop in a spacecraft habitat. Aquatic plants have enormous potential for edible biomass production but have been little studied as potential food crops for space applications. The proposed μG-LilyPond™ is an autonomous environmentally controlled floating plant cultivation system ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  8. Efficient cFS-based On-board Lamberts Solution for DSMs

    SBC: ADVANCED SPACE LLC            Topic: T11

    Distributed Spacecraft Missions (DSM) architectures provide unique scientific and programmatic benefits including multipoint in-situ measurements, multi-angle viewpoints, and improved understanding of the connections between separately measured phenomena and their time variations. However, these missions impose significant operational demands on ground tracking resources and mission operators alik ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  9. Transient Acoustic Environment Prediction Tool for Launch Vehicles in Motion During Early Lift-Off

    SBC: CFD RESEARCH CORPORATION            Topic: T1

    Launch vehicles experience extreme acoustic loads dominated by rocket plume interactions with ground structures during liftoff, which can produce damaging vibro-acoustic loads on the vehicle and payloads if not properly understood and mitigated against. Existing capabilities for modeling turbulent plume physics are too dissipative to accurately resolve the acoustic propagation and detailed vehicle ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  10. Multiphase Modeling of Solid Rocket Motor Internal Environment

    SBC: CFD RESEARCH CORPORATION            Topic: T1

    Solid rocket motor (SRM) design requires detailed understanding of the slag accumulation process in order to: predict thrust continuity, optimize propellant conversion efficiency, predict coning effects from sloshing, and to assess potential orbital debris (slag) hazard. Current state-of-the-art models for SRM environment do not have the capability to simulate the accumulation and dynamics of slag ...

    STTR Phase II 2018 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government