You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Low-cost, Time-resolved Chemical Characterization of Atmospheric Aerosols
SBC: AEROSOL DEVICES INC Topic: 23bThe composition of atmospheric particulate matter (“aerosols”) strongly influences health and environmental impacts, but there exist few time-resolved, long-term records of particle-phase chemical composition due to lack of appropriate monitoring tools. Needed is an instrument that is robust, easy-to-operate, with automated calibrations and data reduction, to provide operationally-inexpensive ...
STTR Phase II 2019 Department of Energy -
CORC; Cable Based High Field Hybrid Magnets for Future Colliders
SBC: ADVANCED CONDUCTOR TECHNOLOGIES LLC Topic: 26b"The next generation of very high field accelerator magnets (20 T or more) are expected to be made with high-temperature superconductors (HTS) along with conventional low-temperature superconductors (LTS) to reduce cost. The operation and protection of these magnets becomes very challenging particularly if the HTS coils are made with the tapes and operate at a much lower current than the LTS coils ...
STTR Phase II 2018 Department of Energy -
Scaleup of a Combined Spray Pyrolysis and Fluidized-bed Reactor Method for the Production of High Performing Layered Nickel- rich Cathode Materials as a Continuous Process
SBC: HAZEN RESEARCH, INC. Topic: 14aTo increase the utilization of electric vehicles, the US Department of Energy is seeking to reduce the cost of electric vehicle batteries to less than $125/kWh by 2022. To achieve this goal, the costs of cathode materials, which account for approximately 30% of the cost of vehicle batteries, must be reduced significantly. To address the challenge of lowering the costs of advanced lithium battery c ...
STTR Phase II 2018 Department of Energy -
Demonstration of the technological capability for production of neutron-focusing nickel mirrors
SBC: ELECTROFORMED NICKEL INC Topic: 15aNeutron scattering is one of the most useful methods of studying the structure and dynamics of matter. These methods require large installations at national laboratories, such as Oak Ridge National Laboratory (ORNL), National Institute of Standards and Technology (NIST) and other facilities constructed or planned in the US and around the world. These facilities serve a large and diverse community ...
STTR Phase II 2018 Department of Energy -
REBCO Coated Conductor Cables for Fusion Magnets
SBC: ADVANCED CONDUCTOR TECHNOLOGIES LLC Topic: 22cThe feasibility for fusion as a practical energy source needs to be enhanced significantly by removing some of the restrictions that low-temperature superconductors put on the fusion magnet systems. This can be done by using high-temperature superconductors, allowing for much larger temperature margins, a higher magnet performance and less mechanical degradation during operation. There are curren ...
STTR Phase II 2013 Department of Energy -
Atomically Precise Membranes for the Separation of Hydrocarbons
SBC: MAINSTREAM ENGINEERING CORP Topic: 02aSeparations often account for a majority of process costs. This is because all traditional separation processes have inherent weaknesses that prevent the system from achieving perfect (or even near perfect in many instances) selectivity. These weaknesses result in large recycle streams and require multiple separation units in concert in order to produce a product clean enough for use or sale. An a ...
STTR Phase II 2018 Department of Energy -
Dynamic virtual moulage based on thin film adhesive displays
SBC: ARCHIE MD INC. Topic: DHA17A002Providing Army combat medics with meaningful experience in treatment of battlefield injuries is a particular challenge. Moulage has the potential to assist in acquiring what could otherwise be very hard-to-come-by preparatory experience for distressing real-life emergencies medics and soldiers may encounter in the field. However, current approaches to moulage are limited in their ability to reflec ...
STTR Phase II 2018 Department of DefenseDefense Health Agency -
Application of Global Weather and Climate Model Output to the Design and Operatio of Wind-Energy Systems
SBC: CLIMATE FORECAST APPLICATIONS NETWORK, LLC Topic: 07bThis proposal addresses the challenge of providing weather and climate information to support the operation, management and planning for wind-energy systems. There is a growing need for extended range forecast information as wind power increases its penetration into the grid. Future scenarios on decadal time scales are needed to support assessment of wind farm siting, long-term purchase agreements ...
STTR Phase II 2013 Department of Energy -
Recovery Act- Development of a Fiber Based Source of High Average Power Ultrafast Pulses at 2.0 Microns
SBC: Kapteyn-Murnane Laboratories, Inc. Topic: 04dBright coherent light sources in the soft x-ray region of the spectrum are useful for a variety of applications of interest to DOE in the basic sciences, nanoscience and biology, and for technological applications. At Free-Electron Laser Facilities, peak power output of the x-ray pulses is enhanced by using a mid-infrared laser pulse instead of a near-infrared pulse. The current front end for mid- ...
STTR Phase II 2010 Department of Energy -
Nanotechnology-Based Condition Monitoring Sensors for Generation IV Electrical Insulation Systems
SBC: Polymer Aging Concepts Inc Topic: 66aInsulation system degradation resulting in component failure represents a significant contribution to reliability and cost issues facing the nuclear power industry. For example, the Electric Power Research Institute found that 37% of motor failures were due to winding failures, many of which involve failure of the insulation system. Although there are a number of visual, tactile or electrical test ...
STTR Phase II 2010 Department of Energy