You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Fully Encapsulating Dielectrics for Gaseous Helium Cooled Superconducting Power Cables

    SBC: Advanced Conductor Technologies LLC            Topic: N16AT011

    The proposed program will develop dielectrics for dc superconducting power transmission cables that are cooled with cryogenic helium gas. The Dielectrics will be sealed again helium gas penetration and allow for an operating voltage of 12 kV in a pressure of 2 MPa at 50 K. The dielectrics will be designed for use with all helium facing components of power transmission systems based on CORC cables. ...

    STTR Phase II 2018 Department of DefenseNavy
  2. Oxygen Production and Delivery on Demand

    SBC: Global Research and Development Inc.            Topic: DHA17B005

    This Phase II proposal is in response to the Defense Health Agency 2017 SBIR topic 17B-005. The approach is an electrochemical membrane oxygen pump using newly developed nano-thickness membrane technology. The total membrane with all the layers is less

    STTR Phase II 2019 Department of DefenseDefense Health Program
  3. Phase-Change Materials for Tunable Infrared Devices

    SBC: Plasmonics Inc.            Topic: N17AT020

    There is a critical need for the development of dynamic IR materials that can be used to form device level components and systems necessary for mid to long wave infrared (3-12 µm) applications. To meet these future needs, the team proposes to develop tunable optical elements based around metamaterial surfaces or metasurfaces. Metasurfaces are a class of engineered materials where arrays of sub-wa ...

    STTR Phase II 2018 Department of DefenseNavy
  4. Epitaxial Technologies for Gallium Oxide Ultra High Voltage Power Electronics

    SBC: AGNITRON TECHNOLOGY, INC            Topic: N16AT023

    xß-Ga2O3 has emerged as a potentially disruptive semiconductor with a predicted breakdown field of ~8 MV/cm which is more than twice the breakdown field for the incumbent wide bandgap semiconductors GaN and SiC. The availability of ß-Ga2O3 bulk substrates sets this material apart from other wide bandgap materials for power electronic applications. However, the challenge is to find suitable epita ...

    STTR Phase II 2018 Department of DefenseNavy
  5. Wide-Area Laser Additive Manufacturing in Metals with Adaptive Beam Shaping (WALAM-ABS)

    SBC: MV Innovative Technologies LLC (DBA: Opt            Topic: N17AT030

    Optonicus proposes development of the Wide-Area Laser Additive Manufacturing in Metals with Adaptive Beam Shaping (WALAM-ABS) laser additive manufacturing (LAM) system. The WALAM-ABS metal additive manufacturing system will solve long-standing drawbacks imposed by current single-point selective laser melting LAM technology through the use of wide-area processing based on proprietary multi-beam fib ...

    STTR Phase II 2018 Department of DefenseNavy
  6. Medium Voltage Direct Current (MVDC) Fault Detection, Localization, and Isolation

    SBC: ISSAC Corp            Topic: N16AT009

    During the Phase II effort, the ISSAC Team will investigate several objectives and questions posed in Phase I efforts, in order to best develop a draft specification for NGES MVDC DLI systems. This includes exploring notional and conceptual architectures and discerning thresholds for DLI parameters; exploring individual and hybrid protection plan technologies to drive performance requirements for ...

    STTR Phase II 2018 Department of DefenseNavy
  7. Modular Thermal Management System for Electronics Enclosures

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: N16AT014

    The heat load from Navy combat system electronics housed in Mission Critical Enclosures (MCEs) continues to increase. During Phase I, Mainstream designed and demonstrated a modular, scalable thermal management system (TMS) for existing and future MCE cabinets with triple the cooling capacity of the legacy TMS. In Phase II, Mainstream will transition the TMS to the Navy for retrofit and next-genera ...

    STTR Phase II 2018 Department of DefenseNavy
  8. Principled Design of an Augmented Reality Trainer for Medics

    SBC: Unveil LLC            Topic: DHP17A003

    Augmented reality (AR) offers the ability to enhance existing combat medic training by including perceptual cues and adaptive training elements to traditional simulation-based training using manikins. Unveil has developed a training system called the Macrocognitive AR Trainer (MART). MART is designed to foster the development of macrocognitive skills (e.g., sensemaking, assessment skills, mental m ...

    STTR Phase II 2018 Department of DefenseDefense Health Program
  9. Dynamic virtual moulage based on thin film adhesive displays

    SBC: ARCHIE MD INC.            Topic: DHA17A002

    Providing Army combat medics with meaningful experience in treatment of battlefield injuries is a particular challenge. Moulage has the potential to assist in acquiring what could otherwise be very hard-to-come-by preparatory experience for distressing real-life emergencies medics and soldiers may encounter in the field. However, current approaches to moulage are limited in their ability to reflec ...

    STTR Phase II 2018 Department of DefenseDefense Health Program
  10. High Throughput Testing of Additive Manufacturing

    SBC: MRL MATERIALS RESOURCES LLC            Topic: N18AT028

    Additive manufacturing is a disruptive new manufacturing paradigm that hold tremendous potential for creation of novel designs and introduction of novel new alloy systems. However, much of this potential remains unrealized due to a lack of robust material properties databases. Accurate calibration of materials models and robust part qualification and certification regimes both will require massive ...

    STTR Phase II 2019 Department of DefenseNavy
US Flag An Official Website of the United States Government