You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. SBIR/STTR Commercialization Assistance- Ease of use and deployment for a fast, scalable data movement infrastructure

    SBC: VISUS, LLC            Topic: 02b

    In recent decades, High Performance Computing (HPC) has risen as one of the key enablers of innovation in science and engineering. However, complexity and cost of deploying applications impedes industrial adoption. Problems include the quality, speed, and flexibility of software tools and the specialized expertise required to adapt solutions given the profusion of hardware configurations. Efficien ...

    STTR Phase II 2018 Department of Energy
  2. High temporal and spatial resolution measurement of hydrometeor mass for automated assessment of precipitation rate and type

    SBC: Particle Flux Analytics Inc.            Topic: 07a

    The Particle Flux Analytics Inc. (PFA) Multi Angle Snowake Camera (MASC) has been operating at the DOE Atmospheric Radiation Measurement Oliktok Point site since 2015, providing the Atmospheric Radiation Measurement program community with unprecedented information about hydrometeor shape, size, and fallspeed. However, no technology currently exists for completing the critically needed suite of dat ...

    STTR Phase II 2018 Department of Energy
  3. Leveraging the Uintah Computational Framework for Commercial Simulation of Industrial Flares

    SBC: Reaction Engineering International            Topic: 17b

    Advanced modeling and simulation software, such as the Uintah Computational Framework (Uintah), has been developed in the US, through significant funding by the Department of Energy Office of Advanced Scientific Computing, but has been underutilized by US industry. We will leverage Uintah for commercial simulation of industrial flares on publicly available HPC facilities, and we will further devel ...

    STTR Phase II 2018 Department of Energy
  4. Low-cost, Time-resolved Chemical Characterization of Atmospheric Aerosols

    SBC: Aerosol Devices Inc.            Topic: 23b

    The composition of atmospheric particulate matter (“aerosols”) strongly influences health and environmental impacts, but there exist few time-resolved, long-term records of particle-phase chemical composition due to lack of appropriate monitoring tools. Needed is an instrument that is robust, easy-to-operate, with automated calibrations and data reduction, to provide operationally-inexpensive ...

    STTR Phase II 2019 Department of Energy
  5. Ultra-High Temperature Thermal Barrier Coatings

    SBC: HiFunda, LLC            Topic: 19d

    The US Department of Energy has a stated goal to increase the energy efficiency of turbines, and one well recognized method of achieving this is through the use of ceramic thermal barrier coatings (TBCs). However, state of the art zirconia-based TBCs have a temperature limit of about 1200oC, and new TBC materials that can operate at elevated temperatures of 1300oC and above are needed to continue ...

    STTR Phase II 2013 Department of Energy
  6. CORC; Cable Based High Field Hybrid Magnets for Future Colliders

    SBC: Advanced Conductor Technologies LLC            Topic: 26b

    "The next generation of very high field accelerator magnets (20 T or more) are expected to be made with high-temperature superconductors (HTS) along with conventional low-temperature superconductors (LTS) to reduce cost. The operation and protection of these magnets becomes very challenging particularly if the HTS coils are made with the tapes and operate at a much lower current than the LTS coils ...

    STTR Phase II 2018 Department of Energy
  7. Scaleup of a Combined Spray Pyrolysis and Fluidized-bed Reactor Method for the Production of High Performing Layered Nickel- rich Cathode Materials as a Continuous Process

    SBC: HAZEN RESEARCH, INC.            Topic: 14a

    To increase the utilization of electric vehicles, the US Department of Energy is seeking to reduce the cost of electric vehicle batteries to less than $125/kWh by 2022. To achieve this goal, the costs of cathode materials, which account for approximately 30% of the cost of vehicle batteries, must be reduced significantly. To address the challenge of lowering the costs of advanced lithium battery c ...

    STTR Phase II 2018 Department of Energy
  8. Demonstration of the technological capability for production of neutron-focusing nickel mirrors

    SBC: ELECTROFORMED NICKEL, INC.            Topic: 15a

    Neutron scattering is one of the most useful methods of studying the structure and dynamics of matter. These methods require large installations at national laboratories, such as Oak Ridge National Laboratory (ORNL), National Institute of Standards and Technology (NIST) and other facilities constructed or planned in the US and around the world. These facilities serve a large and diverse community ...

    STTR Phase II 2018 Department of Energy
  9. REBCO Coated Conductor Cables for Fusion Magnets

    SBC: Advanced Conductor Technologies LLC            Topic: 22c

    The feasibility for fusion as a practical energy source needs to be enhanced significantly by removing some of the restrictions that low-temperature superconductors put on the fusion magnet systems. This can be done by using high-temperature superconductors, allowing for much larger temperature margins, a higher magnet performance and less mechanical degradation during operation. There are curren ...

    STTR Phase II 2013 Department of Energy
  10. Biomimetic Slope Adaptive Foot-Ankle Prosthesis

    SBC: MOTION CONTROL, INC            Topic: DHP16C007

    The primary objective is to develop a commercially-viable prototype of the slope adaptive prosthesis design and to iteratively improve the design based on ISO standards testing and rigorous use in human subject field trials. The proposed work will build upon knowledge gained in Phase I of the project, which established feasibility for this design approach in a lightweight, passive hydraulic foot-a ...

    STTR Phase II 2018 Department of DefenseDefense Health Program
US Flag An Official Website of the United States Government