You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Hardened, Optically-Based Temperature Characterization of Detonation Environments

    SBC: SA PHOTONICS, LLC            Topic: DTRA19B001

    Improving the effectiveness of counter-WMD operations requires improved understanding of weapon-target interaction. Specifically, time-resolved measurements of temperature and composition are required to allow temporal evolution of a detonation fireball. To address this need, SA Photonics will develop MONITOR, a laser-based temperature diagnostic that will enable wide dynamic range temperature mea ...

    STTR Phase I 2020 Department of DefenseDefense Threat Reduction Agency
  2. Hardened, Optically-Based Temperature Characterization of Detonation Environments

    SBC: IRGLARE LLC            Topic: DTRA19B001

    A novel diagnostic system based on the monolithic quantum cascade laser technology is proposed, enabling probing of points across the entire MIR absorption spectrum of CO for optimal temperature sensitivity across the entire 300 – 3000 K range with MHz time resolution. The proposing team has the capability to design QCL structures that provide strong output over the spectral range of interest in ...

    STTR Phase I 2020 Department of DefenseDefense Threat Reduction Agency
  3. Improved Identification of the function of Novel and Partially Occluded Laboratory Equipment.

    SBC: NOVATEUR RESEARCH SOLUTIONS LLC            Topic: DTRA19B002

    This STTR Phase 1 project proposes development of a statistical relational learning framework for identification of the function of laboratory equipment from imagery. The proposed framework uses semantic reasoning to incorporate evidence from multiple classifiers and feature extractors, domain knowledge, and scene context for scene understanding and labeling. The Phase I effort will focus on imple ...

    STTR Phase I 2020 Department of DefenseDefense Threat Reduction Agency
  4. Multi-Functional Nanotube-Based Sensor Array for Detecting Blood Coagulation Defects

    SBC: INNOSENSE CORPORATION            Topic: DHA19A001

    Defense Health Agency (DHA) is seeking a multi-functional diagnostic to determine blood coagulopathy in real time at point-of-care (POC). Blood coagulopathy, resulting in uncontrolled bleeding, is implicated in 80% of operating room deaths and 50% of trau

    STTR Phase I 2019 Department of DefenseDefense Health Agency
  5. POC Blood Coagulopathy Monitor

    SBC: CFD RESEARCH CORPORATION            Topic: DHA19A001

    Traumatic injuries account for 30% of all life years lost in the US and is the leading cause of death for people under 46 years of age. Uncontrolled bleeding or hemorrhage constitute 30-40% of trauma related deaths and are considered to be a major cause o

    STTR Phase I 2019 Department of DefenseDefense Health Agency
  6. Cervical Spine Health Improvement Products

    SBC: SWITCHBOX INC            Topic: DHA18B001

    Most standard-of-care tools and techniques for evaluating neck disorders are subjective, unreliable, and do not provide actionable information for providers, payers, and organizations to deliver efficient and effective care. This lack of objective neck he

    STTR Phase I 2019 Department of DefenseDefense Health Agency
  7. Development of powder bed printing (3DP) for rapid and flexible fabrication of energetic material payloads and munitions

    SBC: MAKEL ENGINEERING, INC.            Topic: DTRA16A001

    This program will demonstrate how additive manufacturing technologies can be used with reactive and high energy materials to create rapid and flexible fabrication of payload and munitions. Our primary approach to this problem will be to use powder bed binder printing techniques to print reactive structures. The anticipated feedstock will consist of composite particles containing all reactant spe ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  8. Rapid Development of Weapon Payloads via Additive Manufacturing

    SBC: MATSYS INCORPORATED            Topic: DTRA16A001

    MATSYS proposes to adapt emerging additive manufacturing techniques (so-called 3-D Printing) for use with reactive structural materials and demonstrate this capability to rapidly fabricate reactive case. Our concept incorporates two major manufacturing steps: 3D printing of green compacts from pure Al or Al-based reactive powder blend; and Microwave (MW) sintering of green compacts into net-shaped ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  9. Self-fragmenting Structural Reactive Materials (SF-SRM) for High Combustion Efficiency

    SBC: MATSYS INCORPORATED            Topic: DTRA16A002

    MATSYS proposes to develop, test and evaluate a scalable metal-based reactive structural material that will self-fragment to micron or sub-micron scale fuel particles when subjected to explosive shock loading, resulting in significantly enhanced metal combustion efficiency. Use of reactive material casings offers the potential for several-fold increases in blast and overpressure by generating rapi ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  10. Modular Pulse Charger and Laser Triggering System for Large-Scale EMP and HPM Applications

    SBC: SCIENTIFIC APPLICATIONS & RESEARCH ASSOCIATES, INC.            Topic: DTRA16A004

    For effective protection against EMP and HPM threats, it is important to understand the physics of the threats, and also to quantify the effects they have on electrical systems. EMP and HPM vulnerability testing requires delivery of high peak power and electric fields to distant targets. The most practical solution to simulate such environments is to develop a modular, optically-isolated MV-antenn ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
US Flag An Official Website of the United States Government