You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Wide Bandgap Nanostructured Space Photovoltaics

    SBC: Firefly Technologies            Topic: T3

    Firefly, in collaboration with Rochester Institute of Technology, proposes an STTR program for the development of a wide-bandgap GaP-based space solar cell capable of efficient operation at temperatures above 300oC. Efficiency enhancement will be achieved by the introduction of InGaP quantum wells within the active region of the wide-gap base material. The introduction of these nanoscale features ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  2. Nanowire Photovoltaic Devices

    SBC: Firefly Technologies            Topic: T3

    Firefly, in collaboration with Rochester Institute of Technology, proposes an STTR program for the development of a space solar cell having record efficiency exceeding 40% (AM0) by the introduction of nanowires within the active region of the current limiting sub-cell. The introduction of these nanoscale features will enable realization of an intermediate band solar cell (IBSC), while simultaneous ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  3. Wireless, Passive Encoded Saw Sensors and Communication Links

    SBC: Mnemonics, Inc.            Topic: N/A

    There are several objectives of this Phase I proposal. One major objective is to investigate SAW sensor embodiments for pressure and acceleration. Two approaches will be studied, one using the SAW substrate as both the sensor and the communication link, and a second approach using the SAW device as a communication link for an external sensor. The approach will use wireless, passive SAW coded de ...

    STTR Phase I 2008 National Aeronautics and Space Administration
  4. Fuel/Oxidizer Injector Modeling in Sub- and Super-Critical Regimes for Deep Throttling Cryogenic Engines

    SBC: CFD RESEARCH CORPORATION            Topic: T802

    Accurate CFD modeling of fuel/oxidizer injection and combustion is needed to design and analyze liquid rocket engines. Currently, however, there is no mature modeling capability for liquid fuel/oxidizer injectors in LOCI-Chem, used by NASA and its contractors to analyze rocket engines. In this STTR, an innovative, high fidelity injection module will be developed that features the Level Set (LS) i ...

    STTR Phase I 2008 National Aeronautics and Space Administration
  5. An On-Chip Nano-Plasmonics Based Urine Protein Assay Cartridge

    SBC: CFD RESEARCH CORPORATION            Topic: T302

    Long-term exposure to microgravity and radiation during space exploration can pose a critical threat to the health of a flight crew. Real-time monitoring of urine protein levels is an effective way to follow the onset and progress of many diseases and guide the prompt selection of proper therapy. The success of such diagnostic tasks, which is strongly desired for flight missions, critically depend ...

    STTR Phase I 2008 National Aeronautics and Space Administration
  6. Innovative Solid State Lighting Replacements for Industrial and Test Facility Locations

    SBC: Energy Focus, Inc.            Topic: T1002

    The proposed innovation is the replacement of existing test stand and parking lot fixtures with current SSL LED technology. The replacement fixtures will reduce energy consumption, generate less heat and provide maintenance free operation for over 50,000 hours. An explosion-proof fixture is capable of containing an internal combustion event without allowing flames or hot gasses to escape to the s ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  7. Microchannel Thermo Catalytic Ignition for Advanced Mono- and Bipropellants

    SBC: Plasma Processes, LLC            Topic: T301

    Small and micro-spacecrafts require the efficient, micro-propulsion systems. Chemical micro-propulsion is best suited for use as primary thrust, orbital insertion and attitude control because of its high energy density. When grouped into arrays for larger thrust applications, micro-propulsion devices provide high propulsive flexibility or can be used as igniters. The proposed effort will focus ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  8. Mesh Generation and Adaption for High Reynolds Number RANS Computations

    SBC: Research South, Inc.            Topic: T801

    This proposal offers to provide NASA with an automatic mesh generator for the simulation of aerodynamic flows using Reynolds-Averages Navier-Stokes (RANS) models. The tools will be capable of generating high-quality, highly-stretched (anisotropic) grids in boundary layer regions and transition smoothly to inviscid flow regions even in an adaptive context. The objective of the work is to offer a un ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  9. Gaseous Helium Reclamation at Rocket Test Systems

    SBC: Sierra Lobo, Inc.            Topic: T1001

    The ability to restore large amounts of vented gaseous helium (GHe) at rocket test sites preserves the GHe and reduces operating cost. The used GHe is vented into the atmosphere, is non-recoverable, and costs NASA millions dollars per year. Helium, which is non-renewable and irreplaceable once released into the atmosphere, is continuously consumed by rocket test facilities at NASA centers such a ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  10. Enhanced Carbon Nanotube Ultracapacitors

    SBC: SCIENTIC INC            Topic: T601

    The proposed innovation utilizes carbon nanotubes (CNTs) coated with pseudo-capacitive MnO2 material as nano-composite electrode and ionic electrolyte for the construction of ultracapacitors. This novel approach of using nano-structured CNTs architectures provides high surface area of attachment of MnO2 nano-particles to maximize the charge efficiency and power capacity and to reduce series resist ...

    STTR Phase I 2010 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government