You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. A Novel, Microscale, Distributable Sensor Technology for Ionizing Radiation

    SBC: CFD Research Corporation            Topic: DTRA14B004

    Terrorist use of radioactive nuclear materials via nuclear and/or radiological dispersion devices (dirty bombs) is a serious threat. Therefore, it is crucial to detect proliferation of nuclear material. Critical challenges include: (a) high sensitivity detection of signature emissions from radioactive isotopes, and (b) cost-effectiveness for deployment of sensor networks across large storage facil ...

    STTR Phase II 2019 Department of DefenseDefense Threat Reduction Agency
  2. Development of Next-Generation Composite Flywheel Design for Shock and Vibration Tolerant, High Density Rotating Energy Storage

    SBC: MOHAWK INNOVATIVE TECHNOLOGY, INC.            Topic: N13AT022

    Under this Phase II effort, the design of a modular 60 kw (3.6 MJ) shock tolerant composite flywheel for backup/ride through power will be finalized. This composite flywheel design will make use of a novel low cost thermal press cure process to fabricate the individual composite rings used to build up the flywheel. The manufacturing process parameters used in previous hydroburst testing of initial ...

    STTR Phase II 2018 Department of DefenseNavy
  3. DivA: Automated Generation of Logical Code Diversity

    SBC: ATC-NY, Inc.            Topic: N11AT023

    If a computer system suffers a cyber attack, any compromised component that is simply reinstalled will remain vulnerable to the attack that damaged it; so replacements should provide equivalent services implemented differently. This defense can be applied proactively, to create a"moving target"by periodic reconfiguration. Implementing these strategies requires an effective way to create diversity. ...

    STTR Phase II 2013 Department of DefenseNavy
  4. Energy Efficient, Non-Silicon Digital Signal Processing (DSP)

    SBC: HYPRES, INC.            Topic: N17AT027

    Superconductor digital circuits, operating at very high clock speed, can directly process wideband digitized radio frequency (RF) signals. By integrating such digital processing circuitry together with superconductor analog-to-digital converters (ADCs), we propose to develop the next generation digital-RF receivers. Leveraging the recent development of multiple superconductor ADCs on the same chip ...

    STTR Phase II 2018 Department of DefenseNavy
  5. Epitaxial Technologies for Gallium Oxide Ultra High Voltage Power Electronics

    SBC: Agnitron Technology            Topic: N16AT023

    xß-Ga2O3 has emerged as a potentially disruptive semiconductor with a predicted breakdown field of ~8 MV/cm which is more than twice the breakdown field for the incumbent wide bandgap semiconductors GaN and SiC. The availability of ß-Ga2O3 bulk substrates sets this material apart from other wide bandgap materials for power electronic applications. However, the challenge is to find suitable epita ...

    STTR Phase II 2018 Department of DefenseNavy
  6. Fully Encapsulating Dielectrics for Gaseous Helium Cooled Superconducting Power Cables

    SBC: Advanced Conductor Technologies LLC            Topic: N16AT011

    The proposed program will develop dielectrics for dc superconducting power transmission cables that are cooled with cryogenic helium gas. The Dielectrics will be sealed again helium gas penetration and allow for an operating voltage of 12 kV in a pressure of 2 MPa at 50 K. The dielectrics will be designed for use with all helium facing components of power transmission systems based on CORC cables. ...

    STTR Phase II 2018 Department of DefenseNavy
  7. High Fidelity Digital Human Models for Protective Equipment Design

    SBC: CRYE ASSOCIATES LLC            Topic: N11AT019

    Today the evaluation methods employed in the development and assessment of soldier borne Personal Protective Equipment (PPE) system designs are often extremely slow, expensive, and subjective, resulting in significant delays and expense in the fielding of improved designs. Recent rapid advancements in digital human modeling now allow the development of a multi-scale, comprehensive PPE evaluation t ...

    STTR Phase II 2013 Department of DefenseNavy
  8. Hybrid Tempertaure Heterogeneous Technology Energy-Efficient Digital Data Link

    SBC: HYPRES, INC.            Topic: N11AT022

    HYPRES, in collaboration with University of Massachusetts, proposes an energy-efficient hybrid-temperature-heterogeneous-technology (HTHT) digital data link for interfacing 4K superconductor electronics with room-temperature electronics. Comprising several stages of cryogenic SiGe amplifiers at different temperatures, followed by equalization techniques, this data link will be designed to minimize ...

    STTR Phase II 2013 Department of DefenseNavy
  9. Innovative Mitigation of Radiation Effects in Advanced Technology Nodes

    SBC: MICROELECTRONICS RESEARCH DEVELOPMENT CORPORATION            Topic: DTRA16A003

    Micro-RDC has developed portable radiation effects test structures that scale to new process nodes.These structures will enable the investigation of the effects of radiation on the new technology from the material processing level as well as the circuit level.Fabricating the chosen structures and the refinement of software to extract the model parameters will be completed in this effort.A suite of ...

    STTR Phase II 2018 Department of DefenseDefense Threat Reduction Agency
  10. Integrated Computational Material Engineering Approach to Additive Manufacturing for Stainless Steel (316L)

    SBC: Senvol LLC            Topic: N16AT022

    The objective in this project is to implement and validate a probabilistic qualification framework that will enable additive manufacturing (AM) materials and part qualification through the use of a data-driven predictive model within a statistical framework. Senvol seeks to develop and validate a data-driven ICME probabilistic framework for assisting qualification of AM materials and parts. Phase ...

    STTR Phase II 2018 Department of DefenseNavy
US Flag An Official Website of the United States Government