You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Wireless Networked Cryogenic and Minimum Pressure Sensors

    SBC: Nanosonic Inc.            Topic: T13

    This NASA Phase I STTR program would develop high performance, wireless networked cryogenic and minimum pressure sensors for remote monitoring in propulsion systems, using SOI (Silicon on Insulator) NM (nanomembrane) techniques in combination with our pioneering ceramic nanocomposite materials. We will improve the current mechanical and electrical model of semiconductor nanomembrane based sensor ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  2. Wide Range Flow and Heat Flux Sensors for In-Flight Flow Characterization

    SBC: Tao Of Systems Integration Inc            Topic: T2

    The tracking of critical flow features (CFFs) such as stagnation point, flow separation, shock, and transition in flight provides insight into actual aircraft performance/safety. Sensing of these CFFs across flight regimes involves numerous challenges such as a wide temperature/pressure range from subsonic to hypersonic flows. Tao Systems, Mesoscribe Technologies and Virginia Tech propose to devel ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  3. Wide Bandgap Nanostructured Space Photovoltaics

    SBC: Firefly Technologies            Topic: T3

    Firefly, in collaboration with Rochester Institute of Technology, proposes an STTR program for the development of a wide-bandgap GaP-based space solar cell capable of efficient operation at temperatures above 300oC. Efficiency enhancement will be achieved by the introduction of InGaP quantum wells within the active region of the wide-gap base material. The introduction of these nanoscale features ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  4. Validated Engineering Tools for Thin-Ply Composites

    SBC: Opterus Research and Development, Inc.            Topic: T12

    Opterus Research and Development, Inc. proposes to develop and validate multi-scale thin-ply High Strain Composites (HSCs) constitutive modeling tools for incorporation into commercial finite element analysis codes. The constitutive models will capture the time-temperature-load-deformation viscoelastic characteristics common to HSCs as well as the yielding or permanent deformation associated with ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  5. Ultraefficient Themoelectric Devices

    SBC: Microxact, Inc.            Topic: T801

    Thermoelectric (TE) devices already found a wide range of commercial, military and aerospace applications. However, at present commercially available TE devices typically offer limited heat to electricity conversion efficiencies, well below the fundamental thermodynamic limit, calling for the development of higher efficiency materials. The team of MicroXact Inc., Virginia Tech and Sundew Technolog ...

    STTR Phase II 2010 National Aeronautics and Space Administration
  6. uG-LilyPond- Floating Plant Pond for Microgravity

    SBC: Space Lab Technologies, LLC            Topic: T7

    Regenerative space life support will undoubtedly require food production, to recover nutrients and close the carbon loop in a spacecraft habitat. Aquatic plants have enormous potential for edible biomass production but have been little studied as potential food crops for space applications. The proposed μG-LilyPond™ is an autonomous environmentally controlled floating plant cultivation system ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  7. Transient Acoustic Environment Prediction Tool for Launch Vehicles in Motion During Early Lift-Off

    SBC: CFD Research Corporation            Topic: T1

    Launch vehicles experience extreme acoustic loads dominated by rocket plume interactions with ground structures during liftoff, which can produce damaging vibro-acoustic loads on the vehicle and payloads if not properly understood and mitigated against. Existing capabilities for modeling turbulent plume physics are too dissipative to accurately resolve the acoustic propagation and detailed vehicle ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  8. Testing of COTS Systems in Space

    SBC: Streamline Automation, LLC            Topic: T6

    For long duration space missions beyond LEO, the complexity of the missions and the latency of communications with Earth will require HPC systems that would be prohibitively expensive if qualified under traditional guidelines for high reliability space systems. There is a wealth COTS hardware that could potentially be used for HPC systems for non-critical tasks within heavily shielded spacecraft c ...

    STTR Phase I 2019 National Aeronautics and Space Administration
  9. Semiconductor Nanomembrane Based Flight Sensors and Arrays

    SBC: Nanosonic Inc.            Topic: T901

    The NASA Phase I program would develop and demonstrate semiconductor nanomembrane (NM) based flight sensors and arrays on flexible substrates, using SOI (Silicon on Insulator) silicon NM technique in combination with our pioneering HybridsilTM copolymer nanocomposite materials. Specifically, ultrathin nanostructured sensor skins with integrated interconnect elements and electronic devices that can ...

    STTR Phase I 2013 National Aeronautics and Space Administration
  10. Self Assembled Carbon Nanotube Enhanced Ultracapacitors

    SBC: Nanosonic Inc.            Topic: T601

    The objective of this NASA STTR program is to develop single wall carbon nanotube (SWCNT) based ultracapacitors for energy storage devices (ESD) application, using NanoSonic's patented molecular level self-assembly process performed at room temperature. Specifically, we would combine advances in metallic SWCNTs, metal and oxide nanoclusters, and polymeric materials and electrostatic self-assembly ...

    STTR Phase I 2010 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government