You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Advanced Printed Circuit Board Design Methods for Compact Optical Transceiver

    SBC: VOXTEL, INC.            Topic: A15AT001

    To meet the U.S. military needs for hardened laser-ranging sensors for munitions applications, a compact, high-repetition-rate, high-pulse-energy laser rangefinder will be developed consisting of a temperature-stabilized avalanche photodiode (APD) receiver, with a few photons equivalent sensitivity, and a miniature diode-pumped microchip laser. An existing integrated circuit design will be updated ...

    STTR Phase II 2016 Department of DefenseArmy
  2. Fuel Efficient Nanofluid Gear Oil

    SBC: Pixelligent Technologies, LLC            Topic: A15AT018

    Improving vehicle fuel efficiency for the military can significantly reduce costs and reduce risk to solider safety. One way to improve vehicle efficiency for new and legacy vehicles is to reduce frictional loses in the drivetrain through use of lower viscosity lubricants. However, this comes with the risk of reducing durability of drivetrain components through increased wear, pitting and scuffing ...

    STTR Phase II 2018 Department of DefenseArmy
  3. Additive Manufactured Smart Structures with Discrete Embedded Sensors

    SBC: 3DFlexible Inc            Topic: A17AT024

    Recent advances in 3D structure printing and 3D direct printed electronics have widened the scope of possibilities for the Internet of Things (IoT). New near room temperature 3D direct ink writing (DIW) additive manufacturing (AM) printing processes allow many different type of sensors and they can be embedded anywhere in a structure, which offers several benefits. 1. Protection: sensors face degr ...

    STTR Phase II 2019 Department of DefenseArmy
  4. On Demand Energy Activated Liquid Decontaminants and Cleaning Solutions

    SBC: TDA Research, Inc.            Topic: A12AT005

    On-site activated decontaminants will revolutionize chemical and biological decon because the activated solution is produced on demand, without the limitations of traditional pre-made mixtures. TDAs system uses electrical activation to convert battery power into reactive chemicals that quickly destroy chemical and biological warfare agents. Prior to activation, the decontaminant mixture can be saf ...

    STTR Phase II 2018 Department of DefenseArmy
  5. Medical Electro-Textile Sensor Simulation

    SBC: LR TECHNOLOGIES, Inc.            Topic: DHP17A001

    In this topic, we plan to design a vital EMF sensor to work under any conditions. The sensor will be integrated with smart clothing and using e-textile materials.

    STTR Phase II 2018 Department of DefenseDefense Health Agency
  6. Pulse Voltammetry Tools for Accurate and Rapid Analysis of Batteries

    SBC: CFD Research Corporation            Topic: A152092

    Pulse voltammetry techniques, coupled with model-based analysis tools, provide a number of advantages for quantitative analysis of electrochemically active materials that govern the performance of batteries and fuel cells. In prior Phase I and II research, CFD Research developed and validated computational models in software that reads voltammogram data from laboratory instruments; predicts the re ...

    STTR Phase II 2019 Department of DefenseArmy
  7. Rotorcraft External Far-Field Noise Measurement Using a Hot-Air Balloon

    SBC: DELTA GROUP INTERNATIONAL LLC            Topic: A14AT001

    An innovative and fundamental approach to measure far field noise of a helicopter using a hot-air balloon as an acoustic measurement platform is described. The technique, featuring a microphone suspended beneath the basket of a hot-air balloon, is used to obtain acoustic data above, in, and below the horizon plane of a helicopter in forward flight. This approach is postulated to have many advantag ...

    STTR Phase II 2016 Department of DefenseArmy
  8. Thin Film Deposition of Highly Conductive Metals for Sensor Applications- Phase II

    SBC: Summit Information Solutions, Inc.            Topic: A17AT001

    Deposition of highly conductive, continuous thin film metals has proven to be a significant challenge. There are several techniques that allow deposition of these metals, but their application is limited to planar surfaces and only offer complete line of sight deposition. During a recent Phase I STTR project, Summit Information Solutions, Inc. (Summit), in partnership with University of Alabama in ...

    STTR Phase II 2019 Department of DefenseArmy
  9. Wash Durable Flame Resistant NonWovens

    SBC: Luna Innovations Incorporated            Topic: A16AT015

    Luna Innovations, teamed with North Carolina State University’s (NCSU) Non-Wovens Institute (NWI), will meet the Army’s need to develop a novel wash durable, flame resistant, non-woven textile. This practical system will provide military uniforms with excellent flame resistant (FR) protection at a lower manufacturing cost without compromising performance such as durability, repellency, and vec ...

    STTR Phase II 2018 Department of DefenseArmy
  10. Dilution refrigerator technology for scalable quantum computing

    SBC: High Precision Devices, Inc.            Topic: ARMY08T020

    Currently large capacity cryostats, capable of hosting experiments for many qubits, require expensive and hard to obtain liquid cryogens. A few small cryo-free systems exist but they are non-ideal for this use. An opportunity exists for a large scale, c

    STTR Phase II 2010 Department of DefenseArmy
US Flag An Official Website of the United States Government