You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Recovery Act- Scale-up of the Nanomanufacturing of Coated Powders for Superior Battery Electrode Materials
SBC: ALD NANOSOLUTIONS, INC Topic: 09bThere is significant opportunity for energy efficiency improvements in the industrial and manufacturing sectors in the U.S., both from the production and consumption perspective. Higher energy density battery materials will play a role in both, through improved storage of electricity from renewable sources, the enabling of electric vehicles, and through the development of longer lasting, higher po ...
STTR Phase I 2010 Department of Energy -
STTR Phase I:Structural properties of carbon nanotube polymer composites
SBC: BOULDER NONLINEAR SYSTEMS, INC. Topic: MMThis Small Business Technology Transfer Phase I project will develop a new system for fabrication and manipulation of carbon nanotube (CNT) composites. The system will use holographic optical trapping (HOT) with a spatial light modulator (SLM) and a new form of nano-controlled photo-polymerization. This tool will allow the creation of a new class of carbon-nanotube polymer composite materials wit ...
STTR Phase I 2010 National Science Foundation -
Mobile Ice Nucleus Counter
SBC: Droplet Measurement Technologies, LLC Topic: 32cIce crystals can form spontaneously from the freezing of water droplets at temperatures colder than -38
STTR Phase I 2010 Department of Energy -
Ultra Low-Power and Embeddable Blade-Condition Monitor
SBC: Extreme Diagnostics, Inc. Topic: 07cThis SBIR/STTR project delivers an ultra-low power structural health monitoring (SHM) system that uses autonomous, wirelessly embedded sensors to monitor and assess structural integrity in wind turbine blades. EASE features impedance-based active SHM, which is highly sensitive to damage like cracks, delimitations, mass variations, fastener failures and stiffness changes. Blades are the only wind t ...
STTR Phase I 2010 Department of Energy -
Nickel-Based Amorphous Metal Membranes for Water Gas Shift Reactors
SBC: MAINSTREAM ENGINEERING CORP Topic: 10cHydrogen produced today from coal, natural gas, or biomass must be separated and purified outside the reactors using pressure swing absorption (PSA), a process that requires significant additional space and energy. Placing hydrogen-permeable membranes inside the reactors themselves would allow hydrogen to diffuse out, thereby reducing the cost of hydrogen production. In this Phase I effort, Mainst ...
STTR Phase I 2010 Department of Energy -
STTR Phase I: Design, Fabrication and Characterization of Ferroelectric Nanoparticle Doped Liquid Crystal/Polymer Composites
SBC: MEADOWLARK OPTICS, INC. Topic: MMThis Small Business Technology Transfer Phase I project will address the critical need for low driving voltage, adaptive materials providing large phase retardation (for ultraviolet, visible, and infrared wavelengths) within a sub-millisecond time frame. Two technologically innovative tasks will be pursued in parallel and then merged, resulting in the creation of a new class of optical materials - ...
STTR Phase I 2010 National Science Foundation -
Low Cost, Scalable Manufacturing of Microlens Engineered Substrates (MLES) for Enhanced Light Extraction in OLED Devices
SBC: Sinmat Inc Topic: 09bSolid state lighting is being promoted as the ultimate lamps of future. Though the internal quantum efficiency of OLED devices is almost 100%, external efficiency is a mere 36% mainly because of poor light out-coupling (~40%) from the device. Improvement in light out-coupling to >70% and further reducing the manufacturing cost will rapidly accelerate the commercialization of the OLED technology. T ...
STTR Phase I 2010 Department of Energy -
Defect Free, Ultra-Rapid Thinning/Polishing of Diamond Crystal Radiator Targets (20??m) for Highly Linearly Polarized Photon Beams
SBC: Sinmat Inc Topic: 46eThe fabrication of high-quality ultra thin (~20 micron) diamond crystals targets for 9 GeV highly polarized photon beams is an outstanding challenge. Current state of the art polishing/thinning techniques are not successful in thinning single crystal diamond to such dimension because of its extreme hardness and chemical inertness. These techniques create significant stresses surface and sub-surfac ...
STTR Phase I 2010 Department of Energy -
High Surface Area-to-Volume Ultrathin Dense Membrane for Hydrogen Separation
SBC: T3 SCIENTIFIC LLC Topic: 10cProviding a reliable, clean and economical energy source is a priority of the US government. The challenge is to use coal, a secured and economical energy source, to produce clean hydrogen fuel to support domestic and global green economy with near-zero emission. Conventional separation technology and even developmental technology do not satisfy all of the requirements for hydrogen production from ...
STTR Phase I 2010 Department of Energy -
Wide Bandgap Nanostructured Space Photovoltaics
SBC: Firefly Technologies Topic: T3Firefly, in collaboration with Rochester Institute of Technology, proposes an STTR program for the development of a wide-bandgap GaP-based space solar cell capable of efficient operation at temperatures above 300oC. Efficiency enhancement will be achieved by the introduction of InGaP quantum wells within the active region of the wide-gap base material. The introduction of these nanoscale features ...
STTR Phase I 2010 National Aeronautics and Space Administration