You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. A Concrete Additive Manufacturing Process for Fixed and Floating Wind Turbine Foundations and Towers

    SBC: JC Solutions            Topic: 14b

    Tall towers and foundations for modern offshore and land-based wind turbines are too large to transport over roads or rail due to their extremely large dimensions. Existing “one-off” on-site construction methods are too expensive, and are too slow for manufacturing foundations and towers in the large numbers needed, especially for offshore components manufactured in ports with limited lay-down ...

    STTR Phase I 2018 Department of Energy
  2. Advanced Compact X-Ray Spectrometer with High Resolution and Efficiency

    SBC: INCOM, INC.            Topic: 03a

    The combination of X-ray absorption spectroscopy (XAS) with x-ray emission spectroscopy (XES) provides unique diagnostic analysis of both the structure and chemical composition of complex heterogeneous materials. The penetration of X-rays make this method ideal for studying and optimizing material properties under realistic, real time reaction conditions with simultaneous analysis of reaction pr ...

    STTR Phase I 2013 Department of Energy
  3. Advanced Energy-Resolving Imaging Detectors for Applications at Pulsed Neutron Sources

    SBC: NOVA SCIENTIFIC INCORPORATED            Topic: 09a

    A number of unique non-destructive testing techniques and fundamental research studies are enabled by the modern bright pulsed neutron sources. In addition to all the methods previously developed at continuous neutron sources the pulsed structure of neutron beam enables a number of novel methods with the measurement of neutron energy through the time of flight technique. Despite the fact ...

    STTR Phase I 2013 Department of Energy
  4. AeroQUEST: Aeromedical Quantified Understanding via Experimental Standards Toolkit

    SBC: APTIMA INC            Topic: DHA17C001

    Adverse physiological events (PEs) have plagued warfighters piloting military aircraft, in particular PEs involving hypoxia and cockpit cabin decompression. Though there has been a large variety of research performed in trying to understand the problems and why theyre caused, there are inefficiencies due to the lack of standardized cross-laboratory protocols, procedures, and metrics. To address th ...

    STTR Phase I 2018 Department of DefenseDefense Health Agency
  5. 3A Expanding Access to Electronic Property Modeling in Scintillator Crystal Growth and Development

    SBC: RADIATION MONITORING DEVICES, INC.            Topic: 03a

    The development of radiation detection materials would benefit with greater access to computational models that relate physical traits seen in manufacture with complex energy transitions occurring in the material that control operating performance. However, the HPC requirements behind these models remain beyond the reach of most businesses involved in this small yet vital field impacting National ...

    STTR Phase II 2019 Department of Energy
  6. A Mesh Free Framework for Mechanical Simulations of Microstructure Data Files

    SBC: CFD RESEARCH CORPORATION            Topic: 07a

    The Exascale Computing Project is tasked to develop the next generation of high performance computing systems capable of computing at 50 to 100 times faster than current HPC systems. Computing at this extreme-scale will significantly enhance the value of materials modeling and simulation to basic materials research and engineering In particular, computing at the extreme scale will enable a higher ...

    STTR Phase I 2019 Department of Energy
  7. A microfluidic ice nucleating particle counter for continuous measurements from small aerial platforms

    SBC: Handix Scientific Inc.            Topic: 23a

    Quantifying atmospheric aerosol, clouds and precipitation processes are critical needs for understanding and interpreting Earth’s changing energy budget, is a DOE objective, and is of broader benefit to the public. Specifically, the formation of ice in the atmosphere depends on the nature and abundance of ice nucleating particles, and has major implications for precipitation and cloud interactio ...

    STTR Phase I 2018 Department of Energy
  8. "LAPPD Commercialization Fully Integrated Sealed Detector Devices

    SBC: INCOM, INC.            Topic: 38a

    The high energy physics (HEP) community, scientific and medical communities and the public at large, will benefit from the availability of high sensitivity photo- sensors with improved spatial and temporal resolution that scaled to large areas, and manufactured in a robust, durable compact package at low cost. The Phase I program will address this need, demonstrating feasibility of commercial pro ...

    STTR Phase I 2013 Department of Energy
  9. Amplifiers for High Repetition Rate Diode-Pumped Ultra-Intense Femtosecond Lasers

    SBC: XUV LASERS, INC.            Topic: 25c

    The problem being addressed is the development of high intensity ultrashort pulse lasers, in recognition that today’s ultra-high intensity lasers are limited to repetition rates of < 10 Hz. Technical solutions are sought to enable the generation of high energy (joule-level) laser pulses that can be focused to highly relativistic intensity at high repetition rates (100-1000 Hz). The proposed proj ...

    STTR Phase I 2019 Department of Energy
  10. A Multi-physics Analysis Capability for Engine Materials

    SBC: Sunergolab Inc.            Topic: 03b

    Computer-aided Engineering software that apply the Finite Element Method to perform a multi-physics analysis have received widespread acceptance for traditional macro-scale material systems. Challenges persist in the modeling of complex coupled processes in environmental/thermal barrier coatings (E/TBCs) used to protect substrate material against the corrosive environment in the hot section parts ...

    STTR Phase I 2019 Department of Energy
US Flag An Official Website of the United States Government