List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. DEVELOPMENT OF A RELIABLE REAL-TIME FREON DETECTOR

    SBC: ADA Technologies, Inc.            Topic: N/A

    IN ORDER TO PREVENT INJURY OR DEATH RESULTING FROM OXYGEN DEPRIVATION CAUSED BY THE RELEASE OF HIGH CONCENTRATIONS OF FREON GASES IN INDOOR ENVIRONMENTS, A SIMPLE, COMPACT, RELIABLE FREON MONITORING DEVICE IS PROPOSED. THE ELECTRON-CAPTURE DETECTOR WILL BE USED AS THE FREONSENSING ELEMENT IN THE MONITOR BECAUSE OF ITS PROVEN SENSITIVITY AND SELECTIVITY TO FREONS. THE PROPOSED INSTRUMENT, WHICH OPE ...

    SBIR Phase I 1988 Department of DefenseNavy
  2. ELECTRONIC EQUIPMENT SHELTERS

    SBC: Advanced Composite Technology            Topic: N/A

    THIS PROJECT WILL RESEARCH MATERIALS AND DEVELOP A DESIGN AND CONCEPT FOR MAKING ELECTRONIC EQUIPMENT SHELTERS USING ADVANCED MATERIALS. THE ADVANCED MATERIAL SHELTER WILL BE DESIGNED TO TAKE ADVANTAGE OF A NUMBER OF SIGNIFICANT ADVANCES IN MATERIALS AND PROPRIETARY TECHNOLOGICAL ADVANCES IN MANUFACTURING DEVELOPED BY ADVANCED COMPOSITE TECHNOLOGY, INC. (ACT). ACT HAS DEVELOPED TWO TECHNOLOGIES SI ...

    SBIR Phase II 1988 Department of DefenseAir Force
  3. SMALL CRATER BRIDGING MATERIAL

    SBC: Advanced Composite Technology            Topic: N/A

    THIS PROJECT WILL RESEARCH MATERIALS AND DEVELOP A DESIGN AND CONCEPT FOR MAKING A ULTRA-STRONG, LIGHT WEIGHT SMALL CRATER REPAIR SYSTEM USING ULTRA-LIGHT, ULTRA-STRONG ADVANCED MATERIALS. THE END PRODUCT FOR PHASE I WILL BE A DETAILED DESIGN AND ANALYSIS FOR THE SYSTEM. THE ADVANCED MATERIAL SYSTEM WILL BE DESIGNED TO TAKE ADVANTAGE OF A NUMBER OF SIGNIFICANT ADVANCES IN MATERIALS AND PROPRIETARY ...

    SBIR Phase I 1988 Department of DefenseAir Force
  4. INTEGRATED RELIABILITY AND TIMING DESIGN ANALYSIS TOOL

    SBC: ADVANCED SYSTEMS & TECHNOLOGIES INC            Topic: N/A

    DURING DEVELOPMENT OF COMPLEX, EMBEDDED SYSTEMS QUANTITATIVE TRADEOFFS OF RELIABILITY AND TIMING PERFORMANCE ARE OFTEN NOT CONSIDERED. DEGRADED PERFORMANCE IN ONE OR BOTH OF THESE AREAS CAN RESULT. AN INTEGRATED RELIABILITY AND TIMING ANALYSIS TOOL WILL PROVIDE THE CAPABILITY FOR SIMULTANEOUSLY ASSESSING SYSTEM DESIGNS FOR BOTH CHARACTERISTICS. BY BASING THE TOOL ON AN ICONIC DESIGN REPRESENTATION ...

    SBIR Phase II 1988 Department of DefenseNavy
  5. A HARDWARE SCALABLE MICROPROCESSOR-BASED TESTBED FOR SYSTEM-LEVEL SIMULATION

    SBC: ADVANCED SYSTEMS & TECHNOLOGIES INC            Topic: N/A

    THIS IS A PROPOSAL TO DESIGN AND IMPLEMENT AN EFFICIENT AND ECONOMICAL MICROPROCESSOR-BASED TESTBED FOR SYSTEM-LEVEL SIMULATION WHICH IS EASILY SCALABLE IN HARDWARE RESOURCES AND WHICH HAS A POWERFUL DEVELOPMENT ENVIRONMENT. THE PERFORMANCE TARGET OF THE TESTBED IS A TIME COMPRESSION TEN TIME GREATER THAN THAT FROM ONE OF THE CONSTITUENT PROCESSORS. THE SIMULATION TESTBED WILL BE DESIGNED TO EXECU ...

    SBIR Phase I 1988 Department of DefenseNavy
  6. LOW DENSITY STRUCTURE FOR AIRBORNE PLATFORMS

    SBC: AEREON CORP.            Topic: N/A

    DEFINITIONS ARE REQUIRED OF STRUCTURAL WEIGHT FRACTIONS FOR DELTOID AEROBODY PLATFORMS IN ORDER TO ASSESS THEIR POTENTIAL. PRIOR DATA ON CONVENTIONAL AIRPLANES AND ZEPPELINS CANNOT BE INTERPOLATED OR EXTRAPOLATED WITH CONFIDENCE TO PROVIDE THE REQUIRED DEFINITION. THEREFORE, STRUCTURAL DESIGN STUDIES WILL BE MADE ESPECIALLY FOR THIS SHAPE, MASS DISTRIBUTION AND AIRLOAD. MODERN HIGH-STRENGTH AND ST ...

    SBIR Phase II 1988 Department of DefenseAir Force
  7. VAPOR COATING OF BORON FUEL PARTICLES BY MAGNESIUM

    SBC: Aerochem Research            Topic: N/A

    N/A

    SBIR Phase I 1988 Department of DefenseNavy
  8. HIGH DYNAMIC RANGES MIXERS

    SBC: Anadigics Inc            Topic: N/A

    HIGH DYNAMIC RANGE MIXERS ARE BECOMING MORE IMPORTANT AS THE COMPLEXITY OF THE ELECTRONIC WARFARE SYSTEMS INCREASE. SINCE IT IS USUALLY THE FIRST OR SECOND DEVICE FROM THE RF INPUT, THE PERFORMANCE OF THE MIXER IS CRITICAL IN THE OVERALL OPERATION OF THE SYSTEM. THE DESIGN OF THE PRESENT DAY MIXERS IN THE MILLIMETER WAVEBANDS ARE BASED ON SCHOTTKY BASED DIODES IN THE SELF BIAS MODE AND ADVANCEMENT ...

    SBIR Phase I 1988 Department of DefenseAir Force
  9. BOUNDARY LAYER MIXING HEIGHT DETECTOR

    SBC: Applied Technologies, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1988 Department of DefenseArmy
  10. A KNOWLEDGE SUPPORT SYSTEM FOR SATELLITE SURVIVABILITY

    SBC: APTEK, Inc.            Topic: N/A

    CURRENTLY SURVIVABILITY ASSESSMENTS DO NOT USE ARTIFICIAL INTELLIGENCETECHNIQUES. THE GOAL OF THIS PHASE I PROPOSAL IS TO BUILD A DEMONSTRATABLE KNOWLEDGE SUPPORT SYSTEM TO ASSIST SURVIVABILITY ANALYSTS AND SYSTEM ARCHITECTS IN MAKING SURVIVABILITY ASSESSMENTS. SPECIFICALLY, WE WILL BUILD A SYSTEM INCORPORATING A SATELLITE/WEAPON DESCRIPTION AND PROBABILISTIC METHODS THAT WILL PROVE THE FEASIBILIT ...

    SBIR Phase II 1988 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government