List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. MICROCOMPUTER BASED HUMAN SERVICES DECISION SUPPORT SOFTWARE SYSTEM

    SBC: Computer Consulting & Program            Topic: N/A

    N/A

    SBIR Phase I 1983 Department of Health and Human Services
  2. THROUGH ACTIVATED CARBON FABRICS

    SBC: Fiber Materials, Inc.            Topic: N/A

    FABRICS CONSISTING OF ACTIVATED CARBON FIBERS ARE BEING DEVELOPED FOR USE IN CHEMICAL PROTECTIVE GARMENTS AS POTENTIAL REPLACEMENT FOR THE CURRENT COATED FOAM. THESE FABRICS NOT ONLY MUST ABSORB TOXIC CHEMICAL VAPORS ADEQUATELY BUT ALSO PROVIDE GOOD AIR MOISTURE PERMEABILITY TO MINIMIZE THE PHYSIOLOGICAL STRESS ON THE NEARER. HOWEVER, LITTLE IS KNOWN ABOUT THE MECHANISM OF THE COMBINED PROCESSES O ...

    SBIR Phase I 1983 Department of DefenseArmy
  3. COMPOSITE FOR BONE CEMENT OR BONE REPLACEMENT

    SBC: Fiber Materials, Inc.            Topic: N/A

    MANY AREAS OF ORTHOPAEDIC SURGERY WOULD BENEFIT FROM AN INJECTABLE,BIOCOMPATIBLE BONE CEMENT OR BONE REPLACEMENT MATERIAL WHICH COULD PROVIDE IMMEDIATE STRUCTURAL REINORCEMENT TO SKELETAL REGIONS AND THEN GRADUALLY BE INCORPORATED INTO HOST BONES. THE HARVARD MEDICAL SCHOOL BIOMECHAINCS LABORATORY HAS DEVELOPED A PARTICIPATE BONE\ GELATIN COMPOSITE WHICH CURRENTLY UNDERGOING TESTS IN ANIMALS. THIS ...

    SBIR Phase I 1983 Department of DefenseArmy
  4. MATERIALS

    SBC: Fiber Materials, Inc.            Topic: N/A

    THIS PROJECT WILL DEVELOP A TEST PROCEDURE TO DETERMINE STRENGHT OF ROCKET MOTOR CASE MATERIALS AT TEMPERATURES APPROACHING THE MELTING POINT OF THE MATERIALS TO EXTEND THEDATA PRESENTED IN MIL-HDBK-5C. LASER TECHNIQUES TO MEASURE STRAIN BY OBSERVING FLAGS ON THE TEST SPECIMENS AT ELEVATED TEMPERATURES WILL BE USED. SPECIAL ATTENTION WILL BE PAID TOMETHODS OF AFFIXING OR CREATING OBSERVATION FLAGS ...

    SBIR Phase I 1983 Department of DefenseNavy
  5. HOT ISOSTATIC PRESSING OF SILICON NITRIDE AND SILICON CARBIDE IN NITROGEN PRODUCES STRUCTURAL CERAMICS WITH STRENGTH MORE THAN 20% ABOVE NORMAL HOT PRESSED STRUCTURES.

    SBC: Fiber Materials, Inc.            Topic: N/A

    HOT ISOSTATIC PRESSING OF SILICON NITRIDE AND SILICON CARBIDE IN NITROGEN PRODUCES STRUCTURAL CERAMICS WITH STRENGTH MORE THAN 20% ABOVE NORMAL HOT PRESSED STRUCTURES. THE MECHANISM OF STRENGTHENING BY THIS METHOD IS NOT UNDERSTOOD. EXAMINATION OF THE STRUCTURE OF THE BODIES INDICATE THE PRESENCE OF ACICULAR SIC OR SI3N4. IF THIS IS FORMED "IN SITU", IT SHOULD BE POSSIBLE TO ENCOURAGE THE FORMATIO ...

    SBIR Phase I 1983 Department of Energy
  6. COMPOSITES

    SBC: Fiber Materials, Inc.            Topic: N/A

    CARBON-CARBON COMPOSITES ARE IMPORTANT HIGH TEMPERATURE STRUCTURAL MATERIALS. BROADENING THE USE OF CARBON-CARBON MATERIALS IN OXIDIZING ENVIRONMENTS REQUIRES THE DEVELOPMENTOF THIN CRACK-FREE OXIDATION-RESISTANT COATINGS FOR HIGH- STRENGTH COMPOSITE SUBSTRATES. THE PRIMARY OBJECTIVE OF THISPROGRAM IS TO DETERMINE THE FEASIBILITY OF FORMING PROTECTIVE SIC AND SI(3)N(4) COATINGS BY CHEMICAL VAPOR D ...

    SBIR Phase I 1983 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government