Award Data

Wave Computation Technologies, Inc. (WCT) proposes to develop a new multiscale solver for electromagnetic field/circuit co-simulation. This solver combines three efficient electromagnetic field algorithms, (a) the spectral element time-domain (SETD) metho

AND FABRICATE BOTH A PROTOTYPE SUCTION SERVICE AND INFUSION DEVICE THAT WILL UTILIZED A MECHANICAL ROLLER PUMP POWERED WITH ALTERNATIVE MECHANISMS. THE LIGHWEIGHT AND PORTABLE SUCTION DEVICE WILL BE EXPECTED TO PROVIDE CONTROLLED SUCTION OVER A WIDE RANGE OF VACUUM (10 TO 100 CM WATER) FOR VARIOUS TUBE AND OPERATIVE SITE USAGE. POWER FOR THE DEVICE WILL BE NON-ELECTRICAL AND MAY BE PRODUCED BY A S ...

N/A

The objective of this proposal is to develop, demonstrate, and field a Non-Destructive Inspection (NDI) Automatic Test Equipment (ATE) for field units and depot to utilize in inspecting and/or repairing compo-site rotor blades. The NDI-ATE is to be field portable, provide results in near real time, with an automated assessment capability for field use and a detailed assessment capability for depo ...

Kyma Technologies proposes to document and model commonly observed GaN defect structures in device performance simulations to determine the acceptable level of defects to yield a Schottky diode appropriate for typical 600 V market specifications. Bulk GaN substrates have the potential to enable unprecedented GaN Schottky diode performance – better than Si and SiC devices – yet the bulk GaN mat ...

The objective of this project is the design, fabrication, testing and evaluation of an affordable, efficient greywater recycling system for Army mobile field kitchens/sanitation centers. The proposed system utilizes a medialess self-cleaning rotary disk particle separation technology to reduce turbidity and suspended solids, in conjunction with an aerator flotation/surface skimmer to remove fats, ...

The point of care (POC) testing device is a very important tool for the Army in many different applications such as assessing the extent and effects of toxic and hazardous chemical exposure during deployments. Currently, a major challenge for POC testing technology is related to achieving multiplex capabilities with high detection sensitivity and quantification. In this proposal, we will apply our ...

Corvid Technologies is pleased to offer the following response to this topic, A09-051 Innovative manufacturing research on forming of large light armor alloy sections resistant to blast and penetration. Corvid is offering to partner with the non-profit research institution Concurrent Technologies Corporation (CTC). We will investigate specialty welding techniques developed at CTC to determine app ...

This project will develop a field portable nondestructive technique for in-situ monitoring of the health of ceramic armor. The Evisive Scan microwave interference scanning method has been successfully demonstrated in Phase I of the project, where it was demonstrated successfully on Control Specimens and ceramic armor Surrogates designed and fabricated by ARL, and on samples of armor from Stryker ...

This project will develop a field portable nondestructive technique for in-situ monitoring of the health of ceramic armor. The Evisive Scan microwave interference scanning method has been successfully demonstrated in Phase I of the project, where it was demonstrated successfully on Control Specimens and ceramic armor Surrogates designed and fabricated by ARL, and on samples of armor from Stryker ...