List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Intelligent Control For Autonomous Remote Spacecraft

    SBC: ACCURATE AUTOMATION CORPORATION            Topic: N/A

    In Phase I we developed, integrated, and demonstrated a real-time adaptive navigation system, and a companion real-time adaptive guidance system for UAVs. The underlying project goal is to provide an aircraft with the capability to autonomously reroute itself in real time through dynamic hazard environments and still achieve its mission objectives. The adaptive naviagtion system uses an evolutiona ...

    STTR Phase I 2002 National Aeronautics and Space Administration
  2. Airframe Construction for Small, Expendable Unmanned Air Vehicles (UAVs)

    SBC: ACCURATE AUTOMATION CORPORATION            Topic: N/A

    "Accurate Automation Corporation (AAC) proposes to develop a Precision Molded Foam(PMF) method that combines features of precision molding, foam injection and vacuumbagging. This method promises to be low cost, to be scalable to high production rate,to require very little touch labor for finished parts and to provide a high degree ofdimensional precision. With this method, small (

    SBIR Phase I 2002 Department of DefenseNavy
  3. Flight Test Development of the X43A-LS Reusable Launch Vehicle

    SBC: ACCURATE AUTOMATION CORPORATION            Topic: N/A

    Accurate Automation Corporation proposes a three-pronged effort to build on the Phase I program to develop technologies in support of the NASA Hyper-X program and the X-43 series of research vehicles (X-43A, X-43B, and X-43C). The data and technologies developed under the proposed Phase II program will also support the development and testing of future hypersonic vehicles and reusable launch vehic ...

    SBIR Phase I 2002 National Aeronautics and Space Administration
  4. A Distributed Guidance And Control System For Satellite Constellations

    SBC: ACCURATE AUTOMATION CORPORATION            Topic: N/A

    Accurate Automation Corporation has developed a distributed adaptive guidance and control architecture for minimum Delta-V formation flying of satellite constellations. The innovation in this approach is that it is an extremely streamlined solution to a very difficult guidance and control problem. The guidance module of the proposed architecture is built around a simulation of a system of particle ...

    SBIR Phase II 2002 National Aeronautics and Space Administration
  5. Intelligent Control For Autonomous Remote Spacecraft

    SBC: ACCURATE AUTOMATION CORPORATION            Topic: N/A

    In Phase I we developed, integrated, and demonstrated a real-time adaptive navigation system, and a companion real-time adaptive guidance system for UAVs. The underlying project goal is to provide an aircraft with the capability to autonomously reroute itself in real time through dynamic hazard environments and still achieve its mission objectives. The adaptive naviagtion system uses an evolutiona ...

    STTR Phase II 2002 National Aeronautics and Space Administration
  6. A Distributed Guidance And Control System For Satellite Constellations

    SBC: ACCURATE AUTOMATION CORPORATION            Topic: N/A

    Accurate Automation Corporation has developed a distributed adaptive guidance and control architecture for minimum Delta-V formation flying of satellite constellations. The innovation in this approach is that it is an extremely streamlined solution to a very difficult guidance and control problem. The guidance module of the proposed architecture is built around a simulation of a system of particle ...

    SBIR Phase I 2002 National Aeronautics and Space Administration
  7. Very Low Noise, High Efficiency Propeller Designs for Small UAVs

    SBC: ACCURATE AUTOMATION CORPORATION            Topic: N/A

    "The objective of this proposal is to develop low noise propellers for application in a UAV concept called SWARM. We propose a combined effort of theoretical and experimental studies to be fully responsive to the need of the SWARM program. AccurateAutomation Corporation (AAC) offers a comprehensive approach to design and manufacture a propeller that reduces the noise by 12dBA with respect to the ...

    SBIR Phase I 2002 Department of DefenseNavy
  8. Real-Time Aerospace Diagnostics Toolkit

    SBC: Active Parallel Instrumentation, Inc            Topic: N/A

    API proposes to develop a comprehensive toolkit for the construction of real-time diagnostics of aerospace systems. The toolkit includes modular ruggedized hardware components, based upon a COTS design, scalable from 400MFLOPS to 40 GFLOPS or more. Hermetically sealed, thermal managed processors in a small form factor will enable installation in hostile, confined spaces.A software tool, based upon ...

    SBIR Phase I 2002 National Aeronautics and Space Administration
  9. In Situ Evaluation of 3-D Woven Composite Structural Performance Using Fiber Optic Sensors

    SBC: 3TEX, Inc.            Topic: N/A

    "Three-dimensional textile reinforcement architectures with straight in-plane fibers and optimized through thickness fiber content are considered as efficient solutions for the next generation of light weight, damage tolerant, high strength compositesallowing for cost-effective manufacturing solutions. The 3-D weaving process is gentle to the fibers, thus making automated fiber optic sensor insert ...

    STTR Phase II 2002 Department of DefenseAir Force
  10. Three-Dimension Woven Carbon-Glass Hybrid Wind Turbine Blades

    SBC: 3TEX, Inc.            Topic: N/A

    70360 The increased use of environmentally-friendly wind energy would help reduce pollution and the emission of hydrocarbons. Wind energy is a fast growing business area, with state-of-the-art turbine blades approaching design limits based on glass reinforced composite materials. New materials and blade design approaches that utilize higher performance carbon fibers would enable lighter mate ...

    SBIR Phase I 2002 Department of Energy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government