List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. 3WEAVE MULTI-FUNCTIONAL COMPOSITES; LOAD BEARING AND ARMOR PROTECTION

    SBC: 3TEX, Inc.            Topic: N/A

    Shipboard structures such as aircraft hangars, masts, antennae cable trunks, etc. need armor protection against small arms fire and light blast associated with a terrorist or other asymmetric attack. These structures benefit from the use of lightweightanti-corrosive materials. 3TEX will develop a multi-functional composite material system that will both carry structural loads and provide ballistic ...

    SBIR Phase I 2003 Department of DefenseNavy
  2. 3WEAVE-COMPOSITE/CELLULAR-METAL BLAST PROTECTION

    SBC: 3TEX, Inc.            Topic: N/A

    Shipboard structures such as aircraft hangars, masts, antennae cable trunks, etc. need armor protection against blast and ballistic events associated with a terrorist or other asymmetric attack. These structures benefit from the use of lightweight energyabsorbing materials. 3TEX will develop a 3D-woven-composite/cellular-metal armor system. The new material/armor technology is based on 3WEAVE 3D w ...

    SBIR Phase I 2003 Department of DefenseNavy
  3. 4 Kelvin Refrigerator for Superconducting Electronics

    SBC: ACCURATE AUTOMATION CORPORATION            Topic: N/A

    N/A

    SBIR Phase II 2001 Department of DefenseNavy
  4. 4 Single Crystal Aluminum Nitride Substrates"

    SBC: KYMA TECHNOLOGIES, INC.            Topic: N/A

    Attempts to grow large area low defect density aluminum nitride substrates has had limited success. We propose the use of Kyma Technologies' novel growth process for production of 4

    SBIR Phase I 2001 Department of DefenseMissile Defense Agency
  5. A Fail-Safe Controllable Magneto-Rheological Fluid Smart Pad/Damper System for Submarine Based Weapon Shock and Vibration Mitigation

    SBC: Advanced Materials and Devices            Topic: N/A

    An innovative tunable vibration absorber (TVA) concept was developed in the Phase I feasibility study. This design was selected among others to be developed in full scale in Phase II and Phase II Option based on a detailed theoretical modeling, smallprototype test results, and a cost analysis, which were conducted in Phase I.In Phase II and Phase II Option a new generation of TVA utilizing a clas ...

    SBIR Phase I 2003 Department of DefenseNavy
  6. A Fail-Safe Controllable Magneto-Rheological Fluid Smart Pad/Damper System for Submarine Based Weapon Shock and Vibration Mitigation

    SBC: Advanced Materials and Devices            Topic: N/A

    An innovative tunable vibration absorber (TVA) concept was developed in the Phase I feasibility study. This design was selected among others to be developed in full scale in Phase II and Phase II Option based on a detailed theoretical modeling, smallprototype test results, and a cost analysis, which were conducted in Phase I.In Phase II and Phase II Option a new generation of TVA utilizing a clas ...

    SBIR Phase II 2003 Department of DefenseNavy
  7. A Feel Beyond Fingers for the Blind

    SBC: VORTANT TECHNOLOGIES, LLC            Topic: N/A

    N/A

    SBIR Phase I 2003 Department of Education
  8. A General Computer Code for Simulation of Plasma Aerodynamics and Propulsion

    SBC: LYTEC LLC            Topic: N/A

    Lytec LLC proposes to integrate the simulation technology of the MagnetoHydroDynamic (MHD) community into the worlds leading propulsion and aerodynamic flow solver WIND. The WIND code has been chosen because of its general acceptance in the aerospace community as a first class flow simulation tool. The ultimate goal is to provide an integrated magnetogasdynamic solver that will advance the state o ...

    SBIR Phase I 2001 National Aeronautics and Space Administration
  9. A High-Power, Ceramic, RF Generator and Extractor

    SBC: Multi-phase Services, Inc.            Topic: N/A

    65349 The quest for alloys capable of extended use under severe service conditions has recently prompted interest in dual-phase Cr/TaCr2 intermetallic alloys. However, their brittleness and poor fracture toughness at ambient temperature have greatly limited their applicability. To overcome these disadvantages, this project will conduct alloy design and development using a macroalloying and m ...

    SBIR Phase I 2001 Department of Energy
  10. A Process for On-Line Quality Control of Recycled Plastic Flake

    SBC: National Recovery Technologies LLC            Topic: N/A

    Generally, it is accepted that for plastics recycling to be economically viable in the long term, recycled resins must be competitive with virgin resins. To compete with virgin material, new applications must be made available for recycled resins. Such applications will require that the recycled resin be of a high purity level. Thus, many processors are requiring ever-tightening contamination limi ...

    SBIR Phase I 2001 Environmental Protection Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government