List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. 3WEAVE MULTI-FUNCTIONAL COMPOSITES; LOAD BEARING AND ARMOR PROTECTION

    SBC: 3TEX, Inc.            Topic: N/A

    Shipboard structures such as aircraft hangars, masts, antennae cable trunks, etc. need armor protection against small arms fire and light blast associated with a terrorist or other asymmetric attack. These structures benefit from the use of lightweightanti-corrosive materials. 3TEX will develop a multi-functional composite material system that will both carry structural loads and provide ballistic ...

    SBIR Phase I 2003 Department of DefenseNavy
  2. 3WEAVE-COMPOSITE/CELLULAR-METAL BLAST PROTECTION

    SBC: 3TEX, Inc.            Topic: N/A

    Shipboard structures such as aircraft hangars, masts, antennae cable trunks, etc. need armor protection against blast and ballistic events associated with a terrorist or other asymmetric attack. These structures benefit from the use of lightweight energyabsorbing materials. 3TEX will develop a 3D-woven-composite/cellular-metal armor system. The new material/armor technology is based on 3WEAVE 3D w ...

    SBIR Phase I 2003 Department of DefenseNavy
  3. 4 Kelvin Refrigerator for Superconducting Electronics

    SBC: ACCURATE AUTOMATION CORPORATION            Topic: N/A

    N/A

    SBIR Phase II 2001 Department of DefenseNavy
  4. 4 Single Crystal Aluminum Nitride Substrates"

    SBC: KYMA TECHNOLOGIES, INC.            Topic: N/A

    Attempts to grow large area low defect density aluminum nitride substrates has had limited success. We propose the use of Kyma Technologies' novel growth process for production of 4

    SBIR Phase I 2001 Department of DefenseMissile Defense Agency
  5. A Feel Beyond Fingers for the Blind

    SBC: VORTANT TECHNOLOGIES, LLC            Topic: N/A

    N/A

    SBIR Phase I 2003 Department of Education
  6. A General Computer Code for Simulation of Plasma Aerodynamics and Propulsion

    SBC: LYTEC LLC            Topic: N/A

    Lytec LLC proposes to integrate the simulation technology of the MagnetoHydroDynamic (MHD) community into the worlds leading propulsion and aerodynamic flow solver WIND. The WIND code has been chosen because of its general acceptance in the aerospace community as a first class flow simulation tool. The ultimate goal is to provide an integrated magnetogasdynamic solver that will advance the state o ...

    SBIR Phase I 2001 National Aeronautics and Space Administration
  7. A High-Power, Ceramic, RF Generator and Extractor

    SBC: Multi-phase Services, Inc.            Topic: N/A

    65349 The quest for alloys capable of extended use under severe service conditions has recently prompted interest in dual-phase Cr/TaCr2 intermetallic alloys. However, their brittleness and poor fracture toughness at ambient temperature have greatly limited their applicability. To overcome these disadvantages, this project will conduct alloy design and development using a macroalloying and m ...

    SBIR Phase I 2001 Department of Energy
  8. A Process for On-Line Quality Control of Recycled Plastic Flake

    SBC: National Recovery Technologies LLC            Topic: N/A

    Generally, it is accepted that for plastics recycling to be economically viable in the long term, recycled resins must be competitive with virgin resins. To compete with virgin material, new applications must be made available for recycled resins. Such applications will require that the recycled resin be of a high purity level. Thus, many processors are requiring ever-tightening contamination limi ...

    SBIR Phase I 2001 Environmental Protection Agency
  9. A Simple Target for the Production of Aqueous [18F] Fluoride Ion Using [18O] Oxygen Gas

    SBC: Petnet Pharmaceuticals, Inc.            Topic: N/A

    60795 Positron emission tomography (PET) is a non-invasive functional imaging technique that measures biochemical/physiological parameters using radiopharmaceuticals labeled with positron-emitting radioisotopes within the human body. The development of a reliable, high yield, and economical method for the cyclotron-produced radioisotope fluorine-18 in the form of [18F] fluoride ion would be b ...

    SBIR Phase I 2001 Department of Energy
  10. A Simple Target for the Production of Aqueous [18F] Fluoride Ion Using [18O] Oxygen Gas

    SBC: Petnet Pharmaceuticals, Inc.            Topic: N/A

    60795 Positron emission tomography (PET) is a non-invasive functional imaging technique that measures biochemical/physiological parameters using radiopharmaceuticals labeled with positron-emitting radioisotopes within the human body. The development of a reliable, high yield, and economical method for the cyclotron-produced radioisotope fluorine-18 in the form of [18F] fluoride ion would be b ...

    SBIR Phase II 2001 Department of Energy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government