You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Dual S&C-Band Telemetry Transmitter System for Missile Testing

    SBC: Quasonix, LLC            Topic: MDA11T004

    Reductions and reallocations of telemetry wireless bandwidth have prompted the need for DoD agencies to adapt to operation in more restricted and less desirable frequency spectrum. Telemetering systems must evolve to address these frequency allocation changes, while retaining operational characteristics that are vital to MDA mission success. The design and implementation of high performance transm ...

    STTR Phase I 2012 Department of DefenseMissile Defense Agency
  2. Low Defect Density Mercury Cadmium Telluride on Silicon by Bulk Layer Transfer

    SBC: SRICO INC            Topic: MDA11T002

    The goal of this STTR project is to develop an engineered growth substrate technology that will enable low defect MCT growth on silicon that is comparable in defect density to MCT grown on lattice matched CZT substrates. The layer transfer process elements demonstrated in Phase I will be further optimized to produce low defect density MCT on silicon substrates in Phase II. SRICO will achieve this ...

    STTR Phase II 2012 Department of DefenseMissile Defense Agency
  3. No-Oven, No-Autoclave, Composite Processing

    SBC: CORNERSTONE RESEARCH GROUP INC            Topic: X503

    Cornerstone Research Group Inc. (CRG) proposes to continue the efforts from the 2010 NASA SBIR Phase I topic X5.03, "No-Oven, No-Autoclave (NONA) Composite Processing." NONA offers NASA the ability to manufacture composites without an oven or autoclave, which will significantly decrease manufacturing costs. Large, single-piece composite structures for NASA Heavy Lift Launch Vehicles are currently ...

    SBIR Phase II 2012 National Aeronautics and Space Administration
  4. Microfabricated, 94 GHz, 25 W, Helical Traveling Wave Tube

    SBC: Teraphysics Corporation            Topic: S102

    Teraphysics Corporation completed the Phase I objectives for the electrical design of a 94 GHz, 26 W TWT with 53% overall efficiency, including the helical circuit with efficiency enhancing taper, input/output couplers, electron gun, magnetic circuit and multistage depressed collector. The device includes a novel, microfabricated, helical circuit with electron beam propagating above the helix rat ...

    SBIR Phase II 2012 National Aeronautics and Space Administration
  5. Rad-Hard and ULP FPGA with "Full" Functionality

    SBC: RNET TECHNOLOGIES INC            Topic: X602

    RNET has demonstrated the feasibility of developing an innovative radiation hardened (RH) and ultra low power (ULP) field programmable gate array (FPGA), called the RH/ULP FPGA. The design utilizes an advanced SOI process technology. It is the vision of RNET to develop a family of radiation hardened FPGA products with a variety of features including programmable logic, configurable analog functi ...

    SBIR Phase II 2012 National Aeronautics and Space Administration
  6. Data Concentrator for Modular and Distributed Control of Propulsion Systems

    SBC: ORBITAL RESEARCH INC            Topic: A207

    Orbital Research proposes to develop, build and test 3 additional high temperature components for use in the design of a Data Concentrator Module in distributed turbine engine control at high temperatures. The concentrator receives analog and digital signals related to turbine engine control and communicates with a FADEC or high level command processor. This data concentrator follows the road map ...

    SBIR Phase II 2012 National Aeronautics and Space Administration
  7. Fast Responding Pressure-Sensitive Paint for Large-Scale Wind Tunnel Testing

    SBC: INNOVATIVE SCIENTIFIC SOLUTIONS INC            Topic: A209

    The proposed work focuses on implementing fast-response pressure-sensitive paint for measurements of unsteady pressure in rotorcraft applications. Significant rotorcraft problems such as dynamic stall, rotor blade loads in forward flight, and blade-vortex interaction all have significant unsteady pressure oscillations that must be resolved in order to understand the underlying physics. Installatio ...

    SBIR Phase I 2012 National Aeronautics and Space Administration
  8. Tunable Interior Rotorcraft Noise Control

    SBC: CORNERSTONE RESEARCH GROUP INC            Topic: A209

    CRG has recently developed a new class of shape memory polymers (SMP) that are electrically activated, as opposed to the more mature thermally activated SMPs. Electrically activated shape memory polymers (EASMP) open a new design space of unexplored functionality beyond what has been considered for thermally activated materials. This project will combine the advantages of EASMP with the design of ...

    SBIR Phase I 2012 National Aeronautics and Space Administration
  9. Skin Friction and Pressure Measurements in Supersonic Inlets

    SBC: INNOVATIVE SCIENTIFIC SOLUTIONS INC            Topic: A210

    Supersonic propulsion systems include internal ducts, and therefore, the flow often includes shock waves, shear layers, vortices, and separated flows. Passive flow control devices such as micro-vortex generators and micro-ramps have been proposed to improve vehicle performance. The ability to measure surface quantities such as skin friction and unsteady pressure on the inlet model would provide in ...

    SBIR Phase I 2012 National Aeronautics and Space Administration
  10. Simultaneous Skin Friction and Pressure Sensitive Paint

    SBC: INNOVATIVE SCIENTIFIC SOLUTIONS INC            Topic: A401

    Currently, the contribution of skin friction to the total drag of a wind tunnel model is estimated by comparing measurements of the total drag to the integrated pressure drag. While this yields an estimate for the average skin friction, the distribution of the skin friction cannot be determined from such measurements. The distribution of skin friction and pressure is available from computational f ...

    SBIR Phase I 2012 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government