Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Development of a High Temperature Sensor Based on Transformation-Induced Resistivity Changes in Ordered Alloys

    SBC: UES, Inc.            Topic: AF06T037

    There is an increasing demand for high temperature sensors that operate accurately and reliably in extreme environments and they are vital in several aerospace applications. This aim was directly addressed by a novel idea where microstructural changes caused by phase transformation and the attendant physical property changes that can be easily measured is used as a sensor. In Phase I of this progr ...

    STTR Phase II 2008 Department of DefenseAir Force
  2. High-current Field Emitter Arrays for Directed Energy Weapons

    SBC: Innovative Scientific Solutions, Inc.            Topic: AF06T018

    Field-emission electron-emitting arrays hold promise for use in high current-density electron-beam devices as replacement for power consuming thermionic emitters. Large field-emitter arrays, however, are limited in total current due to non-uniformity and resulting instability problems. As a solution to these problems current-limiting devices, such as a field-effect transistor (FET) for each emitte ...

    STTR Phase II 2008 Department of DefenseAir Force
  3. Ballistic Imaging for Dense Spray Diagnostics in Harsh Chemically Reacting Environments

    SBC: Innovative Scientific Solutions, Inc.            Topic: AF06T009

    The primary objective of this Phase-II research effort will be to build, deliver, and test a next-generation time-domain ballistic photon imaging (BPI) system based on ultrafast lasers for characterizing the two-phase combustion region within bi-propellant rocket engines. This will include integration into a rocket facility of choice for the Air Force Office of Scientific Research and the Air For ...

    STTR Phase II 2008 Department of DefenseAir Force
  4. STTR Phase II: Photochemically Switched Chiral Materials for Chiral Nematic Displays

    SBC: KENT DISPLAYS, INC.            Topic: CT

    This Small Business Technology Transfer (STTR) Phase II project will develop an extremely low cost photodisplay for stored value cards such as gift cards, payroll and income support cards where, for the first time, the value of the card and other information can be displayed to the user updateable with each use. The enabling display technology based on photo switchable chiral materials provides ...

    STTR Phase II 2008 National Science Foundation
  5. STTR Phase II: Durable Functional Coloring of Fiber Reinforced Thermoplastic Structural Composites for High Strength Material Applications

    SBC: The Shepherd Color Company            Topic: CT

    The Small Business Technology Transfer Research (STTR) Phase II project will demonstrate the ability to color structural composite parts made of thermoplastic polymers reinforced with long (3 mm to 25 mm in length) glass fibers. Today the options are black or natural resin color which limits their design appeal. Colorants are not used in thermoplastic composites for structural applications becaus ...

    STTR Phase II 2008 National Science Foundation
  6. STTR Phase II: A New Process for Boride Coatings for Manufacturing Applications

    SBC: UES, Inc.            Topic: AM

    This Small Business Technology Transfer (STTR) Phase II project is seeking the transfer and further development and commercialization of a new low temperature metal-organic chemical vapor deposition (LT-MOCVD) technology for boride coatings. The project will work to develop coatings for characterizations of adhesion, microstructure, morphology, composition and hardness. Selected coatings will be t ...

    STTR Phase II 2008 National Science Foundation
  7. Reduced Nonlinearity Superconducting Thin Films for Transmit and Receive Applications

    SBC: UES, Inc.            Topic: AF06T014

    This STTR Phase II project is directed towards the development of high performance large-area thick YBCO films and microwave devices on suitable single crystal substrates through modified TFA-MOD approach for transmit and receive applications. We propose to continue our successful Phase I project to further increase critical current density of Jc to 3-5 MA/cm2 and lead to state-of-the-art IMD (int ...

    STTR Phase II 2008 Department of DefenseAir Force
  8. STTR Phase I: Engineering Clostritrial Fermentation for Biobutanol Production

    SBC: BIOPROCESSING INNOVATIVE COMPANY INC            Topic: EO

    Intellectual Merit: This STTR project will develop novel engineered Clostridia strains for fermentation to economically produce butanol as a biofuel from sugars derived from starchy and lignocellulosic biomass. Butanol is an important industrial solvent and potentially a better transportation fuel than ethanol. Recent rising oil prices and limited petroleum resources have generated high interest i ...

    STTR Phase I 2008 National Science Foundation
  9. STTR Phase I: A Simple and Innovative Approach to the Synthesis of Metal, Alloy, Metal Oxide, and Mixed-Metal Oxide Nanoparticles

    SBC: Cosmas, Inc.            Topic: AM

    The Small Business Technology Transfer Research (STTR) Phase I project addresses the scale-up to kilogram quantities of a novel university laboratory solid-state method of synthesizing metal oxide and metal nanoparticles by mixing common chemical starting materials and baking the resulting precursor material at modest temperatures; and the dispersment of the loosely agglomerated particles for comm ...

    STTR Phase I 2008 National Science Foundation
  10. STTR Phase I: Novel Deposition Process to Produce Bilayer Alloy Electrocatalysts for PEM Fuel Cells

    SBC: Faraday Technology, Inc.            Topic: AM

    This Small Business Technology Transfer (STTR) Phase I project addresses the need for novel catalytic systems for electrochemical energy conversion technologies, specifically polymer electrolyte membrane (PEM) fuel cells, through an innovative bilayer electrocatalyst design and the ability to implement that design using a sophisiticated electrodeposition process. The project will demonstrate impro ...

    STTR Phase I 2008 National Science Foundation
US Flag An Official Website of the United States Government