You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. MEMS Adaptive Optics Enhancement of Quantum Entanglement for Secure Message Transmission through the Atmosphere

    SBC: G. A. Tyler Associates, Inc.            Topic: AF06T030

    The proposed effort builds upon the results obtained from the successful Phase I effort to develop a design for a quantum communication demonstration experiment to be conducted at an Air Force facility such as SOR or NOP. Because of the low cost and light weight of MEMS adaptive optics, this technology is considered as the baseline approach to create the quantum communication channel for propagat ...

    STTR Phase II 2008 Department of DefenseAir Force
  2. STTR Phase I: Integrated Powered Knee-Ankle Prosthetic System

    SBC: Ekso Bionics Inc            Topic: EO

    This Small Business Technology Transfer (STTR) Phase I research project proposes the development of the design features, sensory system and the control algorithm of an integrated powered knee-ankle power regenerative prosthesis. Despite significant advances in lower limb prosthetics over the past decade, all presently commercially available lower limb prostheses incorporate passive ankle joints. T ...

    STTR Phase I 2008 National Science Foundation
  3. STTR Phase I: Lower Extremity Exoskeleton Assist Device for Reducing the Risk of Back Injuries among Workers

    SBC: Ekso Bionics Inc            Topic: AM

    This Small Business Technology Transfer Phase I project seeks to create exoskeleton assist devices for workers in distribution centers and automobile assembly plants. By using these assistive devices, workers can dramatically reduce the load in the vertebrae of the lower back when maneuvering parts and boxes. Such collaboration between humans and machines has the benefit of the intellectual advant ...

    STTR Phase I 2008 National Science Foundation
  4. STTR Phase I: Engineering Clostritrial Fermentation for Biobutanol Production

    SBC: BIOPROCESSING INNOVATIVE COMPANY INC            Topic: EO

    Intellectual Merit: This STTR project will develop novel engineered Clostridia strains for fermentation to economically produce butanol as a biofuel from sugars derived from starchy and lignocellulosic biomass. Butanol is an important industrial solvent and potentially a better transportation fuel than ethanol. Recent rising oil prices and limited petroleum resources have generated high interest i ...

    STTR Phase I 2008 National Science Foundation
  5. STTR Phase I: Laser Ultrasonic Emission Sensor for In-process Monitoring during High-Speed Laser Welding

    SBC: BOSSA NOVA TECHNOLOGIES, LLC            Topic: AM

    The Small Business Technology Transfer Research (STTR) Phase I project will demonstrate the technical feasibility for in-process monitoring of welding quality during high-speed laser welding of thin plates which is critical to manufacturing of fuel cells. The monitoring system is based on laser detection of small ultrasonic signals emitted during the welding process. The proposed technique is a mo ...

    STTR Phase I 2008 National Science Foundation
  6. Stability Models for Augmentor Design Tools and Technology Assessment

    SBC: CASCADE TECHNOLOGIES INC            Topic: AF06T033

    Augmentors, increase the thrust of a gas turbine engine by burning additional fuel with hot engine exhaust gases. Maintaining flame stability over a wide range of operating conditions is desired. An understanding of the effects of geometry and combustion processes on the flame stability is required to design advanced, efficient, and stable augmentors. Key factors affecting flame stability are vit ...

    STTR Phase II 2008 Department of DefenseAir Force
  7. STTR Phase I: Direction and Profile Control for Thermal Sprays

    SBC: CASTLEROCK ENGINEERING            Topic: AM

    This Small Business Technology Transfer (STTR) Phase I project aims to apply the unique property of high-speed jets to adhere to nearby curved surfaces, with a turning radius much larger than the size of the jet - the so-called COANDA effect. The proposed research aims to take advantage of this effect to manipulate thermal spray jet stream and vector the stream such that the hot thermal gas stream ...

    STTR Phase I 2008 National Science Foundation
  8. STTR PHASE I: Simple Desulfurizing Component Enables Fuel Processing of Sulfur-laden Logistic Fuels for Fuel Cells

    SBC: CATACEL CORP            Topic: AM

    This Small Business Technology Transfer (STTR) Phase I project will investigate the technical and commercial feasibility of coating metal foils with a solid sorbent so that they act as a desulfurizing component for pre-treatment of sulfur-laden liquid fuels. The coated foils will be inserted into a small heat exchanger that acts as a platform unit for conversion of liquid fuels to hydrogen for fue ...

    STTR Phase I 2008 National Science Foundation
  9. High Strength, Transparent Alumina IR Windows with Nano-scale (< 100 nm) Sintered Microstructure

    SBC: Technology Holding, LLC            Topic: AF07T009

    This STTR Phase I project is designed to develop a novel process for fabricating a nano-grained ceramic material for infrared windows. The proposed STTR builds upon our previous Phase I (Navy) SBIR experience to minimize risks and maximize the likelihood of success. This proposed work will utilize an innovative method to fabricate nanocrystalline alumina infrared window materials with significantl ...

    STTR Phase I 2008 Department of DefenseAir Force
  10. Hybrid Approach for Multi-Scale Modeling of Radiation Transfer in Three-Dimensional Non-Gray Media

    SBC: CFD RESEARCH CORPORATION            Topic: AF08T020

    In this STTR project, an efficient and high-fidelity computational module to predict non-gray radiative transfer will be developed and validated. The proposed hybrid approach to solve the radiative transport equation (RTE) is a combination of the spherical harmonics (PN) method and the Monte-Carlo method. Non-gray gases will be treated using the full spectrum correlated k-distribution (FSCK) metho ...

    STTR Phase I 2008 Department of DefenseAir Force
US Flag An Official Website of the United States Government