You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Numerical Simulation of Rocket Exhaust Interaction with Lunar Soil
SBC: CFD RESEARCH CORPORATION Topic: T602Rocket plume impingement can cause significant damage and contaminate co-landing spacecraft and surrounding habitat structures during lunar landing operations. CFDRC and the University of Florida will develop an innovative simulation system for predicting surface erosion and debris transport caused by lunar surface rocket plume impingement. This simulation system combines 1) a unified continuum-ra ...
STTR Phase II 2008 National Aeronautics and Space Administration -
Automation of Analysis Model Creation
SBC: Technosoft, Inc Topic: N06T018Although numerical analysis applications have proven to be effective and reasonably accurate, the effort required to develop the associated analysis models remains a challenging and time consuming task. While many meshing tools are currently available, decomposing and manipulating the design geometry and enhancing the topology for mesh construction are manual processes and place the heaviest dema ...
STTR Phase II 2008 Department of DefenseNavy -
An On-Chip Nano-Plasmonics Based Urine Protein Assay Cartridge
SBC: CFD RESEARCH CORPORATION Topic: T302Long-term exposure to microgravity and radiation during space exploration can pose a critical threat to the health of a flight crew. Real-time monitoring of urine protein levels is an effective way to follow the onset and progress of many diseases and guide the prompt selection of proper therapy. The success of such diagnostic tasks, which is strongly desired for flight missions, critically depend ...
STTR Phase I 2008 National Aeronautics and Space Administration -
Fuel/Oxidizer Injector Modeling in Sub- and Super-Critical Regimes for Deep Throttling Cryogenic Engines
SBC: CFD RESEARCH CORPORATION Topic: T802Accurate CFD modeling of fuel/oxidizer injection and combustion is needed to design and analyze liquid rocket engines. Currently, however, there is no mature modeling capability for liquid fuel/oxidizer injectors in LOCI-Chem, used by NASA and its contractors to analyze rocket engines. In this STTR, an innovative, high fidelity injection module will be developed that features the Level Set (LS) i ...
STTR Phase I 2008 National Aeronautics and Space Administration -
Wireless Digital Link Between Hearing Aids
SBC: ADVANCED MEDICAL ELECTRONICS CORP Topic: N/ADESCRIPTION (provided by applicant): This proposed project will create an ultra-low power, digital wireless transceiver as an integrated circuit (IC) which will enable communication between hearing aids worn in the left and right ears in a binaural system. Wireless synchronization between the digital signal processors of two hearing instruments is a new technology for next generation hearing inst ...
STTR Phase II 2008 Department of Health and Human ServicesNational Institutes of Health -
Wireless Digital Link Companion Microphone
SBC: ADVANCED MEDICAL ELECTRONICS CORP Topic: N/ADESCRIPTION (provided by applicant): The objective of this project is to develop a hearing aid and wireless companion microphone system based on new, highly-innovative, very low-power ultra-wideband impulse radio technology. The phase I program successfull y established the feasibility of fully integrating an ultra-wideband (UWB) impulse radio transceiver and antenna system inside a behind-the-ear ...
STTR Phase II 2008 Department of Health and Human ServicesNational Institutes of Health -
Separation of Speech from Background
SBC: AETION TECHNOLOGIES LLC Topic: N/AHuman ability to attend to a single voice in the presence of background interference is remarkable. If this could be imitated in practical technology it would be of great benefit for automatic speech recognition and other applications. Researchers at OhioState University have demonstrated computational methods for separating speech from interfering sounds that imitate human auditory processing, an ...
STTR Phase I 2003 Department of DefenseAir Force -
Innovative Concepts for Non-Thermal Based Anti-Icing/De-Icing of Rotor Blade Leading Edges
SBC: AKRON AIR MATERIALS, LLC Topic: N08T013This proposal aims at the development of a low-power deicing system using the newly developed magnetostrictive alloy as functional materials, namely the Ni-Mn-Ga alloy. Present studies have shown that the Ni-Mn-Ga smart alloy does not require excessive input power to operate while an impulsive strain of over 5% can be generated under a load of over 1 Mpa. When power is applied to the solenoid arou ...
STTR Phase I 2008 Department of DefenseNavy -
Ultraviolet Light Devices for Vitamin D
SBC: APOLLO LIGHT SYSTEMS, INC. Topic: N/ADESCRIPTION (provided by applicant): Vitamin D deficiency is now recognized as a significant health problem for middle-aged and older adults. Vitamin D deficiency exacerbates osteoporosis and causes the bone disease, osteomalacia. Vitamin D deficiency increases risk of skeletal fractures. It is well known that the ultraviolet B portion of the solar spectrum is responsible for the cutaneous product ...
STTR Phase I 2003 Department of Health and Human ServicesNational Institutes of Health -
Hydroforming of Lightweight Aluminum and Magnesium Components from Tube-Development and Commercialization of a Novel Elevated Temperature Hydroforming System
SBC: Applied Engineering Solutions, LLC Topic: N/ASignificant fuel cost savings can be realized in the automotive and aerospace industries by employing lightweight materials in the design and fabrication of vehicular components. To date, the exploitation of lightweight magnesium and aluminum alloys in component fabrication has been restricted due to their limited formability at room temperatures in conventional metal stamping processes. Hydrofo ...
STTR Phase I 2003 Department of Energy