List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Pilot Physiologic Assessment System (PPAS)

    SBC: ORBITAL RESEARCH INC            Topic: N091018

    Orbital Research Inc in collaboration with NASA Glenn Research Center (NASA GRC), Kent State University (KSU) and Massachusetts Institute of Technology (MIT) will design and test the second generation, Pilot Physiologic Assessment System (PPAS-2) as part of the Phase I option and Phase II SBIR program funded by the U.S. Navy. The system will be a comprehensive bio-monitoring suite that acquires ph ...

    SBIR Phase II 2010 Department of DefenseNavy
  2. Very Rapid Cure Capable Resin and Optimization for Pre-Preg Process Development of Barrier or Isolation Ply Materials

    SBC: RENEGADE MATERIALS CORPORATION            Topic: N08150

    The current manufacturing processes used for restoring corrosion protection on F-35 aircraft composites panels are time consuming and wasteful. The goal of this Phase II program is to demonstrate and deliver a low-energy-cure, epoxy-fiberglass prepreg that can be used to restore the galvanic barrier on the F-35 fighter aircraft. Ultraviolet (UV) and Light Emitting Diode (LED) cure resin systems re ...

    SBIR Phase II 2010 Department of DefenseNavy
  3. Automatic User Interface Configuration Management

    SBC: Edaptive Computing, Inc.            Topic: N091061

    Edaptive Computing, Inc. (Edaptive) presents our Phase II proposal for a unique and commercially viable solution to the problem of developing software user interface components that are required to support simultaneous heterogeneous platform technologies and/or operating systems, and that are directly traced to and validated against operational requirements. Our Common Configuration Management Int ...

    SBIR Phase II 2010 Department of DefenseNavy
  4. Cure System Equipment Optimization for Rapid Cure Epoxy Coated Fiberglass

    SBC: RENEGADE MATERIALS CORPORATION            Topic: N08137

    Military aerospace structures require that a fiberglass galvanic corrosion isolation layer be used between any graphite composite parts in contact with aluminum. Adding a layer of fiberglass prepreg onto the aluminum-mating side of the composite laminate is a simple way to meet this requirement. Rapid curing resins and prepreg initiated using UltraViolet (UV) or Light Emitting Diode (LED) energy a ...

    SBIR Phase II 2010 Department of DefenseNavy
  5. Development of Multifunctional Erosion-Resistant Damping Coating Systems and Application Methods for IBRs and Blisks

    SBC: HERMAN ADVANCED ENGINEERING, INC.            Topic: N08144

    The objective of the proposed work is to further develop the erosion-resistant damping coating technology to Technology Readiness Level (TRL) 5 & 6 and to demonstrate TRL 5 & 6 by testing a coated IBR via a bench test and by testing in a relevant environment engine test, respectively. The efforts will be carried out by a team of investigators at Herman Advanced Engineering and several other instit ...

    SBIR Phase II 2010 Department of DefenseNavy
  6. Standardized Hardware Independent Framework for Active Sensing

    SBC: SAMRAKSH COMPANY, THE            Topic: SB082033

    We propose to implement a platform based on the .NET Micro Framework (MF) for mote-scale Wireless Sensor Networks (WSNs) and Active Tag Networks (ATNs). The resulting middleware would significantly simplify the development of applications on these systems, both by providing a hardware-independent, high-level, development environment and by providing standard implementations for essential services ...

    SBIR Phase II 2010 Department of DefenseNavy
  7. Improvements to Sense and Avoid (SAA) Systems for Unmanned Aircraft Systems (UAS)

    SBC: DEFENSE ENGINEERING CORPORATION            Topic: AF081069

    There is no Sense and Avoid (SAA) solution for small UAS such as Scan Eagle, Raven, or BATMAV, which represent by far the greatest number of UAS. Equipping small UAS with SAA capability is problematic, mainly due to the very small size, weight and power (SWAP) resources available. The SAA system must compete for critical SWAP resources with fuel and payload sensors. Small, low-power EO and sens ...

    SBIR Phase II 2010 Department of DefenseNavy
  8. Free Layer Blade Damper By Magneto-mechanical Coating

    SBC: HERMAN ADVANCED ENGINEERING, INC.            Topic: N04019

    To prevent gas turbine engine blade failure, the excited resonant response needs to be attenuated to an acceptable level. Under our recent Navy SBIR Phase I and Phase II (Free Layer Blade Damper by Magneto-mechanical Coating) efforts, a novel free layer blade damper has been developed in order to enhance vibration damping and fatigue strength, without diluting surface properties associated with re ...

    SBIR Phase II 2010 Department of DefenseNavy
  9. High Efficiency, Aerodynamically Enhanced Vaneaxial Fan

    SBC: Cornerstone Research Group, Incorporated            Topic: OSD08E12

    Cornerstone Research Group Inc. (CRG) proposes to develop the next generation of vaneaxial fans through extensive aerodynamic study coupled with state-of-the-art motor and controller technologies. Analytical tools to aid in the development of the next generation vaneaxial fans will be implemented to provide rapid tradespace assessment for new fan designs, which will be followed with computational ...

    SBIR Phase II 2010 Department of DefenseNavy
  10. Thin Films of Lithium Niobate for High Efficiency Electro-Optic Modulators

    SBC: Srico Inc            Topic: N07190

    This Small Business Innovation Research Phase II project exploits the emerging technologies of wafer bonding and ion slicing, referred to as “smart-cut” to substantially improve the performance capability of lithium niobate based electro-optic modulators. The greatest problem has been to achieve high bandwidths while still maintaining low drive switching voltage. Material electro-optic coeffic ...

    SBIR Phase II 2010 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government