You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
STTR Phase II: Nanofiber Fabrication via Melt Coextrusion for Fuel Filter Membranes
SBC: POLYMERPLUS LLC Topic: MNThe broader impact/commercial potential of this Small Business Technology Transfer Phase II project is to demonstrate a low cost, environmentally friendly co-extrusion fabrication method for producing high surface area micro- and nanofiber based nonwoven fuel filter sheets. The micro-/nanofiber nonwoven structures are fabricated from two different hydrophilic and hydrophobic polymers in a melt co- ...
STTR Phase II 2015 National Science Foundation -
STTR Phase II: Digital eWriter for The Classroom
SBC: KENT DISPLAYS, INC. Topic: ASThis Small Business Technology Transfer (STTR) Phase II project develops eWriter devices for classroom use as a sustainable paper replacement technology and an effective tool for student-teacher interaction. The eWriters provide a paper-like writing experience and electronically capture, store, and transfer handwritten text and images. For education, eWriters introduce a sustainable paper replacem ...
STTR Phase II 2015 National Science Foundation -
STTR Phase I: Mechanical Surface Treatment for High Performance Biodegradable Implants
SBC: SURFACE INTEGRITY, LLC Topic: BMThe broader impact/commercial potential of this Small Business Technology Transfer (STTR) Phase I project is to shift current practices in bone fracture fixation care from using permanent metal implants to biodegradable metal implants (screws, plates, pins, rods, etc.). A promising biodegradable metal that is gaining widespread attention is magnesium. This project will advance magnesium implant te ...
STTR Phase I 2015 National Science Foundation -
Interface for the collection, analysis, and visualization of simulation performance data
SBC: Perduco Group, Inc., The Topic: AF15AT14ABSTRACT: To complement capabilities of future autonomous systems, the Air Force requires interoperable tools & methodologies to design, verify, validate, assess & operate human-machine system interactions associated with autonomous and manned systems integration. Often the human performance measures and status of each simulation is reported independently making it challenging to analyze the data. ...
STTR Phase I 2015 Department of DefenseAir Force -
Active Control of a Scramjet Engine
SBC: Ahmic Aerospace LLC Topic: AF15AT19ABSTRACT: Scramjet engines are expected to operate across wide Mach number ranges and typically incorporate isolators to provide sufficient back-pressure margin and prevent unstart. Unfortunately, isolators introduce additional weight and drag, and form multiple shockwave/boundary layer interactions, which degrade the incoming flow. As military requirements become increasingly demanding, an active ...
STTR Phase I 2015 Department of DefenseAir Force -
MHZ-RATE NONLINEAR SPECTROSCOPY AND IMAGING PLATFORM FOR TRANSIENT AND NONEQUILIBRIUM FLOWS
SBC: SPECTRAL ENERGIES LLC Topic: AF15AT20ABSTRACT: The objective of the proposed research effort is to demonstrate the feasibility of 100 kHz to 1 MHz nonlinear spectroscopy for measurements of molecular energy distributions, energy transfer, major species, and temperature in transient combusting and nonequilibrium flows. This will be accomplished, in part, by extending burst-mode laser technology to the fs and ps regimes for greater tha ...
STTR Phase I 2015 Department of DefenseAir Force -
In Situ Quantitative Spatially-resolved Ablation Diagnostics in High-Enthalpy Flows
SBC: SPECTRAL ENERGIES LLC Topic: AF15AT38ABSTRACT: The objective of the STTR Phase-I effort proposed by Spectral Energies LLC and The University of Tennessee is to demonstrate the feasibility of an in situ quantitative measurement of the products generated by the degradation of a material surface exposed to a hypersonic environment. The concept is based on a state-of-the-art diagnostic method: Coherent Microwave Rayleigh Scattering from ...
STTR Phase I 2015 Department of DefenseAir Force -
Measurement and Modeling of Surface Coking in Fuel-Film Cooled Liquid Rocket Engines
SBC: CFD RESEARCH CORPORATION Topic: AF15AT21ABSTRACT: Designing an efficient and effective film cooling system to protect critical components of modern rocket engines requires a significant number of challenges to be addressed. Complicating the already difficult hydrodynamic challenges, thermal cracking of hydrocarbon fuels is always accompanied by coke formation. The coke deposits on the combustor and nozzle walls reduces heat fluxes and c ...
STTR Phase I 2015 Department of DefenseAir Force -
Micro-Particle Debris Characterization from Hyper-Velocity Impacts
SBC: Torch Technologies, Inc. Topic: MDA13T002Leveraging the results of our Phase I work, the Torch Team proposes to execute laboratory-based experiments to elucidate fundamental micro-debris formation mechanisms to improve optical modeling of impacts. Optical signatures from impacts collected over the last decade have identified definitive micro-debris parameter trends. However, current theories have difficulty reproducing these optical ob ...
STTR Phase II 2015 Department of DefenseMissile Defense Agency -
Environmentally-compliant composite coating for corrosion and wear protection of structural metals
SBC: ECOSIL TECHNOLOGIES, LLC Topic: AF15AT31ABSTRACT: The goal of this proposal is to demonstrate the feasibility of a novel environmentally-compliant process to produce an advanced alloy coating(s) that imparts excellent corrosion and wear resistance to structural metals on military aircraft and weapon systems. The resulting composite coating and the coating process do not consist of any hazardous materials such as heavy metals chromium (C ...
STTR Phase I 2015 Department of DefenseAir Force