Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. STTR Phase I: Mechanical Surface Treatment for High Performance Biodegradable Implants

    SBC: SURFACE INTEGRITY, LLC            Topic: BM

    The broader impact/commercial potential of this Small Business Technology Transfer (STTR) Phase I project is to shift current practices in bone fracture fixation care from using permanent metal implants to biodegradable metal implants (screws, plates, pins, rods, etc.). A promising biodegradable metal that is gaining widespread attention is magnesium. This project will advance magnesium implant te ...

    STTR Phase I 2015 National Science Foundation
  2. Microelectronics Component Adhesive Selection and Design Rules for Failure Avoidance

    SBC: CFD Research Corporation            Topic: MDA14T002

    Thermally induced fatigue and residual stress introduced during fabrication are sources of stress related failure in microelectronics, which raises concerns about product reliability and specification. CFDRC has teamed with experts in the reliability of microelectronics packaging to develop a testing and physics based modeling protocol to correlate material properties and thermal loading conditio ...

    STTR Phase I 2015 Department of DefenseMissile Defense Agency
  3. STTR Phase I: Advanced Manufacturing Processes for Multiple Field Freeform Microlens Arrays for Ultra-Low Cost Medical Endoscopy

    SBC: Ohio Surgical Optics, LLC            Topic: MN

    The broader impact/commercial potential of this Small Business Technology Transfer Research (STTR) Phase I project is that smaller and less expensive medical endoscopes will be made possible, which will allow physicians to see better inside the human body. These devices will shorten recovery times, improve diagnosis and treatment, move procedures from operating rooms to exam rooms, and lower healt ...

    STTR Phase I 2015 National Science Foundation
  4. STTR Phase I: New dwarfing genes to improve yield and abiotic stress tolerance in wheat

    SBC: Gene shifters, LLC            Topic: BT

    The broader impact/commercial potential of this Small Business Technology Transfer (STTR) project is the improvement of wheat yields by introducing newly identified dwarfing genes. The currently used dwarfing genes, which were instrumental in bringing about the "green revolution", are at least partly responsible for this bottleneck. These dwarfing genes, present in more than 90% of the wheat varie ...

    STTR Phase I 2015 National Science Foundation
  5. Low Defect Density Mercury Cadmium Telluride on Silicon by Bulk Layer Transfer

    SBC: Srico Inc            Topic: MDA11T002

    Mercury Cadmium Telluride (MCT) has been described as one of the most technologically significant semiconductor materials and is the most widely used material for long wave infrared (LWIR) imaging. The current challenge is to produce MCT over large focal plane array size at low cost and high reliability without compromising sensitivity or noise performance. MCT on silicon substrates is highly attr ...

    STTR Phase I 2011 Department of DefenseMissile Defense Agency
  6. An Accurate 3D Real-Time Simulation Tool for Generating Hardbody Thermal Histories

    SBC: CFD Research Corporation            Topic: MDA10T003

    Existing thermal analysis tools for optical signature generation are employed in an off-line manner, and are inadequate for new closed-loop real-time system simulations being pursued by MDA. This STTR project aims to develop and demonstrate an innovative simulation tool for the automatic generation and subsequent computation of reduced thermal models for accurate, real-time analysis of complex 3D ...

    STTR Phase I 2011 Department of DefenseMissile Defense Agency
  7. Physics Based Modeling Tools for Next-Generation Lithium Ion Battery Performance and Lifetime

    SBC: CFD Research Corporation            Topic: MDA10T004

    The MDA is developing satellite based systems that could benefit from ongoing developments in advanced materials for lithium ion batteries. Unfortunately, the driving applications for much of the new materials research have less abusive operational cycles than the frequent cycling, and sporadic pulse loads to deep discharge, of MDA satellite applications. Physics based models of battery performa ...

    STTR Phase I 2011 Department of DefenseMissile Defense Agency
  8. Innovative Hardware Technologies for Electromagnetic Attack Rejection in Ballistic Missile Defense System (BMDS) Radars

    SBC: Imaging Systems Technology, Inc.            Topic: MDA10T001

    Under this STTR Imaging Systems Technology (IST) will apply novel Plasma-shell technology and expertise with gas plasma systems to shield and protect BMDS Radar. Plasma-shells are tiny hollow gas encapsulating shells. When energy is applied across the shell, the gas inside ionizes into a plasma. Theory of plasma-electromagnetic (EM) field interaction shows that, under appropriate conditions, pl ...

    STTR Phase I 2011 Department of DefenseMissile Defense Agency
  9. Fast Algorithms for Generating Hardbody Thermal Histories

    SBC: AEGIS TECHNOLOGIES GROUP, INC., THE            Topic: MDA10T003

    The AEgis Technologies Group proposes to develop an innovative real-time thermal solver solution to model hardbody thermal histories. This thermal solver solution will consider the relevant phenomenology associated with MDA targets and other associated objects requiring thermal histories. Modeling of complex objects and advanced features such as model ablation and dynamic surface areas will be co ...

    STTR Phase I 2011 Department of DefenseMissile Defense Agency
  10. Multi Junction Solar cells for Satellite

    SBC: CFD Research Corporation            Topic: MDA09T005

    Higher efficiency solar cells are needed to reduce mass, volume, and cost of DoD space missions. However, to achieve higher efficiency and radiation hardness of the best to date multi-junction photovoltaic (PV) devices, several challenges must be addressed. This project aims to develop: 1) Quantum Well (QW)-based multi-junction cell that exhibits enhanced efficiency, and 2) Radiation-hardened PV c ...

    STTR Phase I 2010 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government