You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Development of Low-Cost Augmented Reality Head Mounted Display

    SBC: SA PHOTONICS, LLC            Topic: N09T031

    SA Photonics, in conjunction with our teammates at the University of Arizona, have developed LARS, the low-cost augmented reality system. This system is a see-through HMD used for training and simulation. LARS was designed using an innovative freeform prism combiner which is small, lightweight and has very little obscuration of the outside world. We have partnered with Rockwell Collins Optronics ( ...

    STTR Phase II 2010 Department of DefenseNavy
  2. Planar, High Frequency, Power Conversion Device Technology

    SBC: TRANSPHORM, INC.            Topic: N09T023

    Transphorm proposes to demonstrate a normally off fast high voltage Gallium Nitride power switch solution. The switch would block to 1200V, have a threshold voltage greater than 5 V, and the phase 2 switch will target an on resistance less than 15 ohm-mm and current more than 1 Amp. To accomplish these targets, Transphorm will combine the design requirements of realizing a high (and positive) thre ...

    STTR Phase II 2010 Department of DefenseNavy
  3. Exact modeling of targets in littoral environments

    SBC: HEAT, LIGHT, AND SOUND RESEARCH, INC.            Topic: N09T026

    The US Navy needs the capability to model acoustic propagation in complex ocean environments containing natural or man-made objects. Such accurate modeling requires the solution of the wave equation in the ocean containing scatterers. In the absence of the scatterer, the oceanic waveguide can be assumed to be axially symmetric. This allows certain types of physically valid approximations to be mad ...

    STTR Phase II 2010 Department of DefenseNavy
  4. High Fidelity Rotorcraft Towing Modeling and Simulation with Towed Magnetic Anomaly Detection System

    SBC: ADVANCED ROTORCRAFT TECHNOLOGY, INC.            Topic: N15AT009

    Towing of a Magnetic Anomaly Detection (MAD) system is an important aspect of rotorcraftmaritime operation. The oscillatory rotorcraft combined with the long and flexible towingcable, the low mass ratio of the towed body to the towing aircraft, and the rotor wake effecton the towed body presents a challenge for integration of a modern MAD system withrotorcraft platform. The research objective is t ...

    STTR Phase II 2016 Department of DefenseNavy
  5. Bonded Joint Analysis Method

    SBC: M4 ENGINEERING, INC.            Topic: N12AT004

    During Phase I and Phase II, M4 Engineering, Inc. and Sandia National Laboratories have created a unique bonded joint analysis methodology and associated software. During Phase II.5, the developed techniques will be further enhanced and a fully functional commercial analysis code (SIMULIA/Abaqus) plug-in will be created. The software plug-in will make the advanced technology accessible to all leve ...

    STTR Phase II 2016 Department of DefenseNavy
  6. Anesthesia Ventilator for Atlantic Bottlenose Dolphins and California Sea Lions

    SBC: Innovative Veterinary Medicine, Inc.            Topic: N14AT015

    Innovative Veterinary Medicine, Inc. has conceptualized and designed an anesthesia ventilator named DolVent™ specifically for the Navy Atlantic bottlenose dolphins and California sea lions. The DolVent™ ventilator design will support the normal physiologic state of these animals using ventilation modes mimicking their natural breathing including the modes of Airway Pressure Release Ventilation ...

    STTR Phase II 2016 Department of DefenseNavy
  7. Coupled Viscous Vortex Particle Method and Unstructured CFD Solver for Rotorcraft Aerodynamic Interaction Modeling

    SBC: ADVANCED ROTORCRAFT TECHNOLOGY, INC.            Topic: N09T009

    The rotorcraft aerodynamic interaction is a complicated problem and remains an extremely challenging aspect of rotorcraft analysis. This STTR is dedicated to developing a solution for the complicated rotorcraft aerodynamic interaction problem. The Phase I research coupled a state-of-the-art vortex particle method (VPM) with an unstructured Navier-Stokes CFD body surface solver and prototyped a hyb ...

    STTR Phase II 2010 Department of DefenseNavy
  8. Tunable Polarization Insensitive Digital Fiber Optic Wavelength Converter with Built-In Test Capability

    SBC: FREEDOM PHOTONICS LLC            Topic: N08T012

    A fully functional widely tunable wavelength converter prototype operating from -40C to 100C at 2.5-10 Gbps, in a 5mm tall package, will be developed.

    STTR Phase II 2010 Department of DefenseNavy
  9. Biojet Fuels from Nonedible Bio-oils and Cellulosic Biomass

    SBC: ENERGIA TECHNOLOGIES, INC.            Topic: N09T034

    The proposed program addresses the emerging needs for the Navy to have cost effective alternative liquid transportation biofuels. The main objectives are to produce bio-jet and bio-diesel fuels from cellulosic biomass and nonedible bio-oils and demonstrate that they have cost structure and product quality comparable to petroleum based fuels. Novel concepts in processing, reactor design and catalys ...

    STTR Phase II 2010 Department of DefenseNavy
  10. In Situ Inspection of Additive Manufactured Metallic Parts Using Laser Ultrasonics

    SBC: INTELLIGENT OPTICAL SYSTEMS, INC.            Topic: N15AT008

    Additive manufacturing (AM) is a very promising technique for rapid, low-cost production of aircraft parts directly from a CAD file. AM is especially appealing for complex parts that would be costly or impossible to fabricate by machining or casting. At the current time there are no reliable, cost-effective techniques to qualify the finished parts. Several government studies have noted this gap an ...

    STTR Phase II 2016 Department of DefenseNavy
US Flag An Official Website of the United States Government