You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. High Fidelity Computational Models for Aggregated Tissue Interaction in Surgical Simulations

    SBC: CFD Research Corporation            Topic: DHP16A001

    Surgical simulations aiming to support surgeon practices and medical education have attracted enormous research effort over the last two decades. However, the physical reality, especially on simulating aggregated tissue interaction, is still unsatisfactory. In this proposed work, an open source surgery simulation framework, SoFMIS, will be utilized and enhanced with tissue interaction models to a ...

    STTR Phase I 2016 Department of DefenseDefense Health Program
  2. Smart Femtosecond Fiber Laser Wound Healing System

    SBC: POLARONYX, INC.            Topic: DHP15B002

    Based on our success in developing the world first commercial high energy femtosecond fiber laser system and our leading proprietary technology development in ultrashort pulsed fiber laser material processing, PolarOnyx proposes, for the first time, a compact high energy fiber laser based smart wound healing tool to meet with the requirement of this DHP solicitation. It includes a high energy fs f ...

    STTR Phase I 2016 Department of DefenseDefense Health Program
  3. Development of powder bed printing (3DP) for rapid and flexible fabrication of energetic material payloads and munitions

    SBC: MAKEL ENGINEERING, INC.            Topic: DTRA16A001

    This program will demonstrate how additive manufacturing technologies can be used with reactive and high energy materials to create rapid and flexible fabrication of payload and munitions. Our primary approach to this problem will be to use powder bed binder printing techniques to print reactive structures. The anticipated feedstock will consist of composite particles containing all reactant spe ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  4. Portable and Automated Radiation Effects Test Structures for Advanced Technology Nodes

    SBC: MICROELECTRONICS RESEARCH DEVELOPMENT CORPORATION            Topic: DTRA16A003

    Micro-RDC will develop portable radiation effects test structures that scales to new process nodes. These structures will enable the investigation of the effects of radiation on the new technology from the material processing level as well as the circuit level. The production of the chosen structures and the development of software to extract the model parameters will form the framework. A suit ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  5. Modular Pulse Charger and Laser Triggering System for Large-Scale EMP and HPM Applications

    SBC: SCIENTIFIC APPLICATIONS & RESEARCH ASSOCIATES            Topic: DTRA16A004

    For effective protection against EMP and HPM threats, it is important to understand the physics of the threats, and also to quantify the effects they have on electrical systems. EMP and HPM vulnerability testing requires delivery of high peak power and electric fields to distant targets. The most practical solution to simulate such environments is to develop a modular, optically-isolated MV-antenn ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  6. Energy Harvesting Fabric

    SBC: Streamline Automation, LLC            Topic: A15AT017

    A human produces more than 100 Watts of waste heat during normal activity. If a fraction of this heat energy can be harvested it can replace the stored chemical energy in one or more of the batteries typically carried by soldiers in the field. The current generation batteries, such as the BB2590 are bulky and rigid. The PowerFelt material developed by Wake Forest University is ideally suited for h ...

    STTR Phase I 2016 Department of DefenseArmy
  7. Using the Conditional Moment Closure Method to Assess the Effects of Turbulence Chemical Kinetics

    SBC: REACTION SYSTEMS, INC            Topic: A16AT001

    The ability to accurately design and predict the performance of combustion-based machinery like gas turbine engines is important in improving their performance, increasing their fuel economy, lowering operating costs, and decreasing pollutant emissions. Almost all of the flows are turbulent in industrial combustion applications, therefore understanding the interaction between turbulence and combu ...

    STTR Phase I 2016 Department of DefenseArmy
  8. Acoustically/Vibrationally Enhanced High Frequency Electromagnetic Detector for Buried Landmines

    SBC: AKELA INC            Topic: A16AT004

    Laboratory investigations have suggested that acoustically or vibrationally inducing motion in buried targets can aid in improving target detectability through a characteristic response related to differential target motion. This gain is realized by adding an additional degree of freedom, modulation due to motion in the GPR return signal, to use as a discriminating feature. The AKELA team is propo ...

    STTR Phase I 2016 Department of DefenseArmy
  9. Runnable Environment for Plug And Scrape Technology (REPAST)

    SBC: Modus Operandi, Inc.            Topic: A16AT006

    Modus Operandi and IHMC propose a Runnable Environment for Plug and Scrape (P&S) Technology (REPAST) for plugging in to social networks. REPAST consists of a P&S device enabling soldiers to perform mobile data analysis. The innovative device lets users carry and configure analytic tools as they travel between locations. Users plug the device into an existing computer system and resume a personal c ...

    STTR Phase I 2016 Department of DefenseArmy
  10. Identification of Multiple Illicit Drugs Using a Handheld Detector Based on Chemiresitive Sensor Arrays

    SBC: Next Dimension Technologies, Inc.            Topic: A16AT008

    Next Dimension Technologies and Caltech will jointly develop a handheld detector to meet the Armys need for a field-based illicit drug identification system. The project will focus on the design and development of a dual-mode chemiresistive sensor array capable of detecting key drugs of interest, including synthetic cannabinoids and opioids. Novel sensing materials, with enhanced chemical sensit ...

    STTR Phase I 2016 Department of DefenseArmy
US Flag An Official Website of the United States Government