You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Satellite Swarm Localization and Control via Random Finite Set Statistics

    SBC: ASTER LABS, INC            Topic: T403

    The proposed novel program will develop and demonstrate a new approach to perform real-time relative vehicle localization within a swarm formation with application to communication-less coordination. These objectives are achieved by using Random Finite Sets statistics theory to solve the multiple object tracking problem. The swarm formation localization problem can be formulated as estimating the ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  2. High-Gain, Low-Excess-Noise APD Arrays for Near-Single-Photon-Sensitive LADAR

    SBC: VOXTEL, INC.            Topic: T901

    One of the challenges facing missions to other planetary bodies including Earth's Moon, Mars, Venus, Titan, Europa; and proximity operations (including sampling and landing) on small bodies such as asteroids and comets' is the ability to provide accurate altimetry for descent, then assess safe landing sites by surveying the landscape. To address NASA's need for space-hardened planetary entry, desc ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  3. Empirical Optimization of Additive Manufacturing

    SBC: Advratech            Topic: T1204

    In this Phase I STTR project, pursuant to the Materials Genome Initiative (MGI) and Integrated Computational Materials Engineering (ICME) interests, the proposed collaborative effort between WSU and Advratech will represent the first AM optimization framework of its kind, constructed entirely from experimental sensor data collected in-situ. Rather than using in-process data to inform limited "phy ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  4. Sustainable Water Purification

    SBC: Streamline Automation, LLC            Topic: T603

    Newly developed phase-engineered and low dimensional materials have opened the door to the design of materials structures that exhibit extremely efficient ionic transport. Recently, a new type of electro-filtration system designed to convert thermal power into purified water from salt water (or other ionic pollutants) has been demonstrated in the lab. The system is based on a bi-phasic nanoplate ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  5. Thin Film Lithium Niobate Microring Modulators for Analog Photonics

    SBC: PARTOW Technologies LLC            Topic: T802

    Lithium niobate (LiNbO3) has been long regarded as the most attractive material for electro-optic modulation for high-performance optical communication systems of up to 100 GHz, as well as for its superior second-order optical non-linearity. The weakly confined LiNbO3 waveguides formed by diffusion or implantation of dopants do not lend themselves to high-level chip integration. One key novel tech ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  6. Deployable Ka-Band Reflectarray

    SBC: Tyvak Nano-Satellite Systems, Inc.            Topic: T501

    Tyvak, in collaboration with UCLA, proposes a novel approach to the challenge of creating a large reflector for Ka-band high data rate links. We propose to attach the primary reflector surface permanently to the surface of a 6U spacecraft and illuminate the reflector using a Cassegrain style subreflector with an illuminating antenna that is permanently mounted to the transmitter / receiver inside ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  7. Bi-Metallic Additive Manufacturing Close-Out of Coolant Channels for Large Liquid Rocket Engine (LRE) Nozzles

    SBC: Keystone Synergistic Enterprises, LLC            Topic: T1204

    This NASA sponsored STTR project will investigate methods for close-out of large, liquid rocket engine nozzle, coolant channels utilizing robotic laser and pulsed-arc additive manufacturing methods. Copper to Nickel alloy interface strength will be quantified and metallurgical characterization completed. A thermal model based on Rosenthal?s analytical expression for a moving heat source, which has ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  8. An Additive Manufacturing Technique for the Production of Electronic Circuits

    SBC: Morningbird Media Corporation            Topic: T1204

    The proposed 9-month research project aims for the development of additive manufacturing techniques for the creation of electronic devices. It will develop an innovative additive manufacturing technique that combines the ink-based printing with laser melting technology to directly print a three-dimensional (3D) system with built-in electrical properties and functioning as an electronic device. Th ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  9. Non-Mechanical Beam Steering for Entry, Descent and Landing Sensors

    SBC: BOULDER NONLINEAR SYSTEMS, INC.            Topic: T901

    Boulder Nonlinear Systems (BNS) and University of Dayton (UD) will team on development of a non-mechanical beam steering (NMBS) subsystem for Entry, Descent and Landing (EDL) sensors. BNS will improve their current polarization grating (PG) technology which is capable of switching well over the +- 25 degree requirement called for in the solicitation. Advances to the PG technology specific to the ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  10. NONA Repair of Composite Structures

    SBC: CORNERSTONE RESEARCH GROUP INC            Topic: T1202

    While much attention is necessarily focused on the evaluation and certification of the materials and processes involved in adhesive bonding, development is still needed in decreasing the cost, time, and complexity of the current repair concepts. A material and processing system is needed that allows the design, infusion, and cure of composite repairs without the current roadblocks imposed by ovens ...

    STTR Phase I 2016 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government