You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Additive Manufacture of Refractory Metal Propulsion Components

    SBC: GEOPLASMA LLC            Topic: T9

    Niobium alloy (C-103) reaction control system (RCS) chambers have been used on numerous NASA programs. However at elevated temperatures, the strength of C-103 decreases significantly. Higher strength niobium alloys have been developed, but these alloys lack the formability of C-103. Recently, Additive Manufacture (AM) of niobium and C-103 has been demonstrated using powder bed electron beam me ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  2. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA18A001

    Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  3. Advanced Simulation Framework for Design and Analysis of Space Propulsion Systems

    SBC: STREAMLINE NUMERICS, INC.            Topic: T901

    The innovation proposed here is a high-performance, high-fidelity framework in the computational fluid dynamics (CFD) code called Loci-STREAM to enable accurate, fast and robust simulations of unsteady multiphase flows such as combustion involving liquid-gas phases in liquid rocket injectors and solid-gas phases in solid rocket motors, and cryogenic cavitation in delivery systems of liquid rocket ...

    STTR Phase II 2010 National Aeronautics and Space Administration
  4. Advanced Unsteady Turbulent Combustion Simulation Capability for Space Propulsion Systems

    SBC: STREAMLINE NUMERICS, INC.            Topic: T901

    The innovation proposed here is a high performance, high fidelity simulation capability to enable accurate, fast and robust simulation of unsteady turbulent, reacting flows involving cryogenic propellants (such as LOX/LH2 and LOX/LCH4). The key features of this proposed capability are: (a) Hybrid RANS-LES (HRLES) methodology, and (b) flamelet modeling for turbulent combustion incorporated in a pr ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  5. An Additive Manufacturing Technique for the Production of Electronic Circuits

    SBC: Morningbird Media Corporation            Topic: T12

    Under the support of a FY 2016 NASA Phase I Small Business Technology Transfer (STTR) contract (NASA contract number NNX16CM40P), Morningbird Media Corporation in collaboration with Alabama A&M University Research, Innovation in Science and Engineering (AAMU-RISE) Foundation, has devised a unique method for an additive manufacturing technique for the direct 3D printing of functional electronics. T ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  6. A Scalable Gas-Particle Flow Simulation Tool for Lander Plume-Surface Interaction and Debris Prediction

    SBC: CFD RESEARCH CORPORATION            Topic: T9

    Spacecraft propulsive landings on unprepared regolith present in extra-terrestrial environments pose a high risk for space exploration missions. Plume/regolith interaction results in (1) the liberation of dust and debris particles that may collide with the landing vehicle and (2) craters whose shape itself can influence vehicle dynamics. To investigate such gas-granular interactions for large-scal ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  7. A Self-Regulating Freezable Heat Exchanger for Spacecraft

    SBC: TDA RESEARCH, INC.            Topic: T601

    A spacecraft thermal control system must keep the vehicle, avionics and atmosphere (if crewed) within a defined temperature range. Since water is non-toxic and good for heat transport, it is typically used as the coolant that circulates within the crew cabin boundary. This loop then interfaces with another low freeze point fluid, such as ammonia, for transport of heat to a radiator where the tempe ...

    STTR Phase II 2013 National Aeronautics and Space Administration
  8. A Supported Liquid Membrane System for Steady State CO2 Control in a Spacecraft Cabin

    SBC: REACTION SYSTEMS, INC.            Topic: T6

    Reducing the allowable concentration of carbon dioxide (CO2) in spacecraft is a critical need for NASA. The system now used on the International Space Station (ISS) is the carbon dioxide removal assembly (CDRA). While it has performed well on the ISS, managers have concluded that using the device to reach the new ppCO2 limit of 2.0 mm Hg is not practical and a new method is needed.In this projec ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  9. Closed-Loop Control of the Thermal Stir Welding Process to Enable Rapid Process / Part Qualification

    SBC: Keystone Synergistic Enterprises, LLC            Topic: T901

    Thermal Stir Welding (TSW) provides advancement over the more conventional Friction Stir Welding (C-FSW) process because it separates the primary processes variables thereby allowing independent control of metal stirring and forging from the stir zone temperature. However, the feedback for precise control of the stir zone temperature, and hence the process parameters to sustain that temperature wi ...

    STTR Phase II 2013 National Aeronautics and Space Administration
  10. Dynamic virtual moulage based on thin film adhesive displays

    SBC: ARCHIE MD INC.            Topic: DHA17A002

    Providing Army combat medics with meaningful experience in treatment of battlefield injuries is a particular challenge. Moulage has the potential to assist in acquiring what could otherwise be very hard-to-come-by preparatory experience for distressing real-life emergencies medics and soldiers may encounter in the field. However, current approaches to moulage are limited in their ability to reflec ...

    STTR Phase II 2018 Department of DefenseDefense Health Agency
US Flag An Official Website of the United States Government