Award Data

Improving vehicle fuel efficiency for the military can significantly reduce costs and reduce risk to solider safety. One way to improve vehicle efficiency for new and legacy vehicles is to reduce frictional loses in the drivetrain through use of lower viscosity lubricants. However, this comes with the risk of reducing durability of drivetrain components through increased wear, pitting and scuffing ...

SOF combat swimmers have a need for the continuous monitoring of each others relative position while diving and for the capability of being able to communicate with each other to help establish a common operational picture (COP).The C3SA system was previously developed under SBIR Topic SOCOM08-001 thru the receipt of both Phase I and Phase II SBIR awards.The C3SA established a stand-alone network ...

Neutron scattering is one of the most useful methods of studying the structure and dynamics of matter. These methods require large installations at national laboratories, such as Oak Ridge National Laboratory (ORNL), National Institute of Standards and Technology (NIST) and other facilities constructed or planned in the US and around the world. These facilities serve a large and diverse community ...

Separations often account for a majority of process costs. This is because all traditional separation processes have inherent weaknesses that prevent the system from achieving perfect (or even near perfect in many instances) selectivity. These weaknesses result in large recycle streams and require multiple separation units in concert in order to produce a product clean enough for use or sale. An a ...

Direct Internal Reforming Solid Oxide Fuel Cells require an anode material with good catalytic reforming and electrochemical reactivity. Although the current state-of-the-art solid oxide fuel cell anode consisting of nickel and yttrium-stabilized zirconia (Ni-YSZ) has excellent catalytic properties and stability for the H2 oxidation at the usual operation conditions, the use of Ni-YSZ anode with c ...

Under the Department of Energy’s Ground-based Nuclear Detonation Research and Development (GNDD R&D) Program, the Air Force Technical Application’s Center (AFTAC) monitors for nuclear explosions through high altitude whole-air gas sampling using compressors to inject air into a high-flow air stream or store in a high-pressure vessel. The existing compressors have proven reliability issues with ...

"The next generation of very high field accelerator magnets (20 T or more) are expected to be made with high-temperature superconductors (HTS) along with conventional low-temperature superconductors (LTS) to reduce cost. The operation and protection of these magnets becomes very challenging particularly if the HTS coils are made with the tapes and operate at a much lower current than the LTS coils ...

To increase the utilization of electric vehicles, the US Department of Energy is seeking to reduce the cost of electric vehicle batteries to less than $125/kWh by 2022. To achieve this goal, the costs of cathode materials, which account for approximately 30% of the cost of vehicle batteries, must be reduced significantly. To address the challenge of lowering the costs of advanced lithium battery c ...

TransWave Photonics, LLC proposes to develop mid-wave infrared photonic integrated circuits based on monolithic integration of passive low-loss waveguides, thermo-optically tunable photonic elements, and quantum cascade gain sections within the same InGaAs/AlInAs/InP platform. The proposed approach will enable power combining and 2-dimensinoal beam steering of the outputs from multiple high-power ...

ADA Technologies, Inc. proposes to transition our previously developed BB-2590 Hybrid Electrical Energy Storage System (HEESS) architecture into a Conformable Wearable Battery format, or CWB-HEESS (Figure 1). We seek to satisfy a meaningful, Army Program Executive Office (PEO) Soldier need for a rechargeable, safe and high energy CWB. We anticipate the CWB-HEESS will have broad U.S. Dept. of Defen ...