You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA18A001

    Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  2. Additive Manufacturing of Scalable 3D Resonators

    SBC: Global Research and Development Inc.            Topic: 29b

    This proposal is submitted in response to the SBIR/STTR Office of Science related to Quantum Information Science (QIS) Supporting Technologies. There is the need for fabrication techniques for scalable 3D Superconducting Radio Frequency (SRF) Structures for Quantum Information Systems. In this proposal we will develop an additive manufacturing approach to developing superconducting 3D microwave re ...

    STTR Phase I 2018 Department of Energy
  3. Variable Flux Machines for Hybrid Electric Vehicles

    SBC: Asymmetric Technologies LLC            Topic: 13b

    The majority of hybrid electric vehicles and electric vehicles (HEV/EV) products use interior permanent magnet (IPM) synchronous machines for traction purpose due to the efficiency and power density consideration. IPM machines use high energy density rare earth based magnet materials such as neodymium and dysprosium. Variable flux (VF) machines using abundant and cheaper soft magnets such as AlNiC ...

    STTR Phase I 2018 Department of Energy
  4. Low-cost and Flexible Transparent Electrodes Based on Ag–ZTOF (Zn–Sn–O–F) Amorphous Composites Through Ink-jet Printing

    SBC: HAZEN RESEARCH, INC.            Topic: 09b

    Sn-doped In2O3 (ITO) is the industry standard and most widely used transparent conducting electrode (TCE) because of its good electrical and optical properties. However, ITO has a number of disadvantages: ITO is not a suitable TCE for next-generation, high-efficiency, flexible OLEDs, because of its inappropriate work function, difficulty in creating desired patterns, low stability, delaminantion d ...

    STTR Phase I 2018 Department of Energy
  5. Nanoparticle Catalytic Discovery using Machine Learning Models with Chemisorption Inputs

    SBC: BIENA TECH LLC            Topic: 06a

    The mechanisms guiding nanocatalysis are poorly understood and extremely hard to model. Proposed effort attempts to provide a machine learning based platform that would guide the design of nanocatalytic materials for a variety of applications, beginning with the use of case of chloro-organic contaminant remediation. The current approaches either use conventional molecular dynamics coupled with ab ...

    STTR Phase I 2018 Department of Energy
  6. High Quantum Efficiency Uni-Traveling-Carrier Photodiode for Optical to Microwave Transduction

    SBC: Freedom Photonics LLC            Topic: 29d

    Modern quantum information systems employ optical photons for long distance communication, operating at ambient temperature, between microwave cavities, which house microwave photons used in quantum computing and microwave detection. These optical photons, carried by fiber-optic or free-space links, offer a low-cost, uncooled alternative to bulky, expensive microwave coaxial cables, which are loss ...

    STTR Phase I 2018 Department of Energy
  7. Development of a breeding system in Chlamydomonas moewusii for improved production strains

    SBC: GLOBAL ALGAE INNOVATIONS, INC.            Topic: 08c

    For economically viable large-scale production of microalgae based food and biofuel to become a reality, significant improvements in algal productivity need to be achieved. With current regulatory guidelines, large scale outdoor cultivation of microalgae for these products restricts the use of transgenic algal strains, which in the laboratory, have thus far been the primary strategy taken to effec ...

    STTR Phase I 2018 Department of Energy
  8. A Concrete Additive Manufacturing Process for Fixed and Floating Wind Turbine Foundations and Towers

    SBC: JC Solutions            Topic: 14b

    Tall towers and foundations for modern offshore and land-based wind turbines are too large to transport over roads or rail due to their extremely large dimensions. Existing “one-off” on-site construction methods are too expensive, and are too slow for manufacturing foundations and towers in the large numbers needed, especially for offshore components manufactured in ports with limited lay-down ...

    STTR Phase I 2018 Department of Energy
  9. Domestication of the microalga Scenedesmus obliquus for biomass feedstock production

    SBC: Microbio Engineering, Inc            Topic: 08c

    To advance a strong and economical biofuels and bioproducts industry, tools are needed for breeding microalgae to improve phenotypes of commercial interest, including biomass yield, culture stability, harvestability, and accumulation of valuable compounds. This project aims to increase biomass feedstock yields by the phototrophic green alga Scenedesmus obliquus by using classical breeding approach ...

    STTR Phase I 2018 Department of Energy
  10. Plug-In Hybrid Vehicle Optimization Using Vehicle-to-Cloud Connectivity

    SBC: Macchina, LLC            Topic: 13c

    Plug-in hybrid electric vehicles (PHEVs) represent a growing segment of the U.S. passenger vehicle market. An increasing number of PHEV models are available to consumers. PHEVs are similar to parallel hybrid vehicles like the Toyota Prius in that they have an electric motor and internal combustion engine that are used synergistically to significantly reduce fuel consumption while maintaining a nea ...

    STTR Phase I 2018 Department of Energy
US Flag An Official Website of the United States Government