You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Multiscale Eulerian-Lagrangian Spray Methodology Coupled with Flamelet Models for Liquid Rocket Engine Combustion

    SBC: STREAMLINE NUMERICS, INC.            Topic: T9

    The innovation proposed here is a novel multi-scale coupling methodology implemented in the Loci-STREAM CFD code, for developing a high-fidelity, high-performance multiphase combustion modeling capability to enable accurate, fast and robust simulation of unsteady turbulent, reacting flows involving cryogenic propellants (such as LOX/Methane) in liquid rocket engines (LREs). During Phase 1 work, a ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  2. MarsOasis- An Efficient Autonomously Controlled Martian Crop Production System

    SBC: Space Lab Technologies, LLC            Topic: T7

    The MarsOasis™ cultivation system is a versatile, autonomous, environmentally controlled growth chamber for food provision on the Martian surface. MarsOasis™ integrates a wealth of prior research and Mars growth chamber concepts into a complete system design and operational prototype. MarsOasis™ includes several innovative features relative to the state of the art space growth chambers. I ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  3. Intelligent, Autonomous, Distributed Vehicle and Electrical Power System Management

    SBC: Stottler Henke Associates, Inc.            Topic: T3

    The proposed innovation, a distributed architecture for intelligent characterization, fault detection/diagnosis/ reconfiguration/replanning/rescheduling, and adaptive execution, substantially leverages large previous NASA investments to assemble the correct set of technologies to implement all aspects of the required intelligent, autonomous vehicle and distributed EPS and other subsystem managers. ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  4. Multi-Band Software Defined Radio Sensor System

    SBC: Pegasense, LLC            Topic: T13

    This Multiband Software Defined Radio (SDR) sensor system proposal will demonstrate the ability to operate within multiple frequency bands and across multiple technology platforms in a single transceiver. The center frequencies and bandwidths chosen are representative of current demonstrated commercial or research devices and bands used: 400 MHz, 900 MHz, and 2.4 GHz ISM bands, with bandwidths of ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  5. Efficient CO2 and H2O Removal with Novel Adsorbentsfor Life Support Applications on Mars

    SBC: MOSAIC MATERIALS, INC.            Topic: T6

    Very low CO2 concentrations that accumulate quickly from human respiration can have dramatic health effects, and thus in NASA’s history many technical removal strategies for CO2 from a confined atmosphere have been suggested and explored. A CO2 removal system that functions in a is a new area of research, as the primary CO2 removal component in the state-of-the-art system doesn’t have the adso ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  6. Wireless Passive Nanoparticle based Intelligent Sensor System for Extreme Environments

    SBC: Sensatek Propulsion Technology, Inc.            Topic: T13

    Sensatek Propulsion Technology, Inc. proposes to demonstrate the feasibility of a wireless, passive, nanoparticle-based sensor system. The sensor in its current form can be used to measure real time temperatures and pressures wirelessly without the need of an external energy source. It should be noted that the same sensing principle can be used for strain monitoring as well. It comprises of a micr ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  7. A Supported Liquid Membrane System for Steady State CO2 Control in a Spacecraft Cabin

    SBC: REACTION SYSTEMS, INC            Topic: T6

    Reducing the allowable concentration of carbon dioxide (CO2) in spacecraft is a critical need for NASA. The system now used on the International Space Station (ISS) is the carbon dioxide removal assembly (CDRA). While it has performed well on the ISS, managers have concluded that using the device to reach the new ppCO2 limit of 2.0 mm Hg is not practical and a new method is needed.In this projec ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  8. Integrated Photonic Filters for RF Signal Processing

    SBC: OEWAVES, INC.            Topic: T8

    In this Project, OEwaves Inc. and Georgia Tech team propose to research and develop a unique RF photonic receiver front-end enabling microwave signal processing at a heterogeneously integrated photonic platform. In particular, we propose to develop a new technology for photonic microwave filters based on the new advances in Si-based integrated photonics. We will exploit the expertise of the team m ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  9. Nanosat Maneuvering and Orbital Transfer Stage

    SBC: Parabilis Space Technologies, Inc.            Topic: T1

    The proposed innovation is a modular, high-performance orbital transfer stage (OTS) vehicle for Nanosats and Microsats launched as secondary payloads and require maneuvering to their desired orbits. The OTS has a modular design, and can accommodate payloads ranging from 5kg 3U size Nanosats to >50kg Microsat size vehicles. The propulsion system uses hydroxyl-terminated polybutadiene (HTPB) fuel wi ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  10. Extensible Modeling to Create Knowledgebase for AM Processing of Alloy GrCop-84

    SBC: Applied Optimization, Inc            Topic: T12

    The research objective of the proposed work is to demonstrate feasibility of utilizing extensible modeling to create an AM knowledgebase for copper alloy, GrCop-84, and utilize it to design an AM process for GrCop-84. The work plan has three tasks: (1) Utilize process modeling to demonstrate feasibility of predicting AM process parameters for alloy GrCop-84 for the powder bed and blown powder proc ...

    STTR Phase I 2018 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government