You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. STTR Phase I: Protecting Livestock from Airborne Disease Transmission Using Non-thermal Plasma Airstream Disinfection

    SBC: Taza Aya LLC            Topic: CT

    The broader impact/commercial potential of this STTR project stems from the costs to U.S. food producers of outbreaks of animal diseases. Producers of poultry, pork, and other food proteins lose more than $1B each year to infectious diseases, including some that are transmitted through the air. For diseases having an airborne transmission route, protective technologies that are available are few a ...

    STTR Phase I 2018 National Science Foundation
  2. STTR Phase I: A Direct Lithium-Ion Battery Recycling Process Yielding Battery-Grade Cathode Materials

    SBC: Li Industries, Inc.            Topic: MI

    This Small Business Technology Transfer Phase I project advances a cost-effective and scalable direct recycling method for producing battery-grade cathode materials from end-of-life (EOL) lithium-ion batteries. The commercialization of the proposed direct lithium-ion battery recycling technology will lower the energy consumption and emissions associated with battery production, reduce demand for r ...

    STTR Phase I 2018 National Science Foundation
  3. STTR Phase I: Advanced Thermophotovoltaic Generators for High-Value Remote Power

    SBC: Marigold Power, Inc.            Topic: PH

    The broader impact / commercial potential of this Small Business Technology Transfer (STTR) Phase I project is to enable electrification of remote oil & gas processes to reduce methane emissions, improve on-site safety, and provide leak-detection and monitoring capabilities. This will be achieved by developing a robust, efficient, small-scale power generator capable of converting on-site fuel to e ...

    STTR Phase I 2018 National Science Foundation
  4. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA18A001

    Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  5. Smart Baseplate for Additive Manufacturing

    SBC: Luna Innovations Incorporated            Topic: DLA18A001

    Additive manufacturing (AM) has rapidly evolved into a valuable technique for making parts which, at times, cannot be fabricated through conventional machining methods.One challenge in the area of AM is the lack of real-time feedback on the fabrication process and the quality of the part being made.This is especially critical given the relatively long periods of time that complex parts can require ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  6. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: X-Wave Innovations, Inc.            Topic: DLA18A001

    Additive Manufacturing (AM) is a modern and increasingly popular manufacturing process for metallic components, but suffers from well known problems of inconsistent quality of the finished product. Process monitoring and feedback control are therefore crucial research areas with a goal of solving this problem. To address this concern, X-wave Innovations, Inc. (XII) and the University of Dayton Res ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  7. Functionalized, Therapeutic-Loaded Liposomes for the Acute Treatment of TBI

    SBC: Luna Innovations Incorporated            Topic: DHA18A001

    Traumatic brain injury is a common problem in both the military and civilian communities, but current treatment protocols are focused on managing symptoms and fail to prevent significant long-term repercussions. In the proposed program, Luna will demonstrate the feasibility of a liposome-based therapeutic delivery system capable of delivering hydrophilic and hydrophobic therapeutics to the traumat ...

    STTR Phase I 2018 Department of DefenseDefense Health Agency
  8. Brain Targeting Nanoparticle for Drug Delivery in Traumatic Brain Injury

    SBC: Weinberg Medical Physics, Inc.            Topic: DHA18A001

    There is an urgent need to bypass or cross the blood brain barrier (BBB) to deliver drugs for TBI treatment. This project aims to develop targted intranasally delivered, magnetically propulsed, and targted nanoparticles for traumatic brain injury (TBI). In Phase I, we will demonstrate the design, fabrication, and in vitro characterization of proposed drug laden magnetic nanoparticles as well as co ...

    STTR Phase I 2018 Department of DefenseDefense Health Agency
  9. STTR Phase I: Microscope-based Technology For Automatic Brain Cell Counts Using Unbiased Methods

    SBC: Stereology Resource Center, Inc            Topic: BM

    The broader impact/commercial potential of this Small Business Technology Transfer (STTR) Phase I project is in automating the process of unbiased stereology, the state-of-the-method used in the life sciences for counting stained cells on tissue sections. Unbiased stereology allows neuroscientists to accurately analyze the size and number of brain cells, which are altered in many neurological diso ...

    STTR Phase I 2018 National Science Foundation
  10. STTR Phase I: Wireless High Temperature Sensor for Real Time Monitoring of Power Generation Turbine Engines

    SBC: Sensatek Propulsion Technology, Inc.            Topic: MI

    This Small Business Innovation Research Phase I project is for the development of a wireless sensor for continuous and real-time measurement of the high temperature in gas turbines. The new sensor offers turbine manufacturers and owners/operators the capability to place small-sized sensors in hard to reach areas in the turbine, and transmit sensed data wirelessly thereby enabling heat loads to be ...

    STTR Phase I 2018 National Science Foundation
US Flag An Official Website of the United States Government