You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA18A001

    Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  2. Analysis of Dislocation Density, Recrystallization, and Residual Stress in 5XXX Aluminum using Laser Peening to mitigate Exfoliation Corrosion

    SBC: HEPBURN AND SONS LLC            Topic: N18AT016

    Hepburn and Sons LLC teaming with The Ohio State University, Center for Electron Microscopy and Analysis (CEMAS) propose to research and develop an innovative application of laser peening technology to mitigate exfoliation corrosion, a special type of inter-granular corrosion that occurs on the elongated grain boundaries. Strongly related, these Mg based alloys, when exposed to tensile stresses, c ...

    STTR Phase I 2018 Department of DefenseNavy
  3. Laser Surface Melt Treatment and Galvanic Protection of 5XXX

    SBC: Luna Innovations Incorporated            Topic: N18AT016

    Exfoliation corrosion of 5XXX series aluminum alloy is an issue related to the sensitization of the aluminum substrate typically occurring at end-grains. The Navy is interested in preventing this corrosion to decrease lifetime costs on Littoral Combat Ships, Ship-to-Shore Connector vessels, and Ticonderoga class ships. Luna will investigate surface modification using laser surface melt processing ...

    STTR Phase I 2018 Department of DefenseNavy
  4. Virus-Like Particle Based pan-Marburgvirus Vaccine

    SBC: Luna Innovations Incorporated            Topic: CBD18A002

    Marburg virus (MARV) is a filamentous enveloped non-segmented negative sense RNA virus. This viruse is considered to be extremelydangerous with case fatality rates as high as 88-90%. Extensive efforts have gone towards effective vaccines for MARV prevention, however,none have been successfully established as licensed vaccines. Glycoprotein (GP) is the only surface protein of MARV. There are substa ...

    STTR Phase I 2018 Department of DefenseOffice for Chemical and Biological Defense
  5. Smart Baseplate for Additive Manufacturing

    SBC: Luna Innovations Incorporated            Topic: DLA18A001

    Additive manufacturing (AM) has rapidly evolved into a valuable technique for making parts which, at times, cannot be fabricated through conventional machining methods.One challenge in the area of AM is the lack of real-time feedback on the fabrication process and the quality of the part being made.This is especially critical given the relatively long periods of time that complex parts can require ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  6. Novel Circulating RNA-based Markers as Diagnostic Biomarkers of Infectious Diseases

    SBC: CFD Research Corporation            Topic: CBD18A001

    In resource limited settings, rapid and accurate diagnosis of infections is critical for managing potential exposures to highly virulent pathogens,whether occurring from an act of bioterrorism or a natural event. This is especially important for hard to detect intracellular bacterial andalphavirus infections, that overlap symptomatically and often treated empirically due to a lack of reliable and ...

    STTR Phase I 2018 Department of DefenseOffice for Chemical and Biological Defense
  7. Systematic Fatigue Test Spectrum Editing Using Wavelet Transformations

    SBC: TECHNICAL DATA ANALYSIS, INC.            Topic: N18BT029

    TDA focuses on developing a state of the art time-frequency-based fatigue spectrum editing (TF-based FSE) framework to reduce the time of fatigue computational analysis and tests. The proposed framework will address (a) through understanding of fatigue loading histories including stationary, nonstationary, linear, and non-linear spectrums, (b) developing a multi-approach TF framework for both unia ...

    STTR Phase I 2018 Department of DefenseNavy
  8. In Situ Marine-Grade Aluminum Alloy Characterization for Sensitization Resistance and Stress Corrosion Cracking Prediction

    SBC: TECHNICAL DATA ANALYSIS, INC.            Topic: N18AT010

    The goal of this proposal is to develop a compact sensor package and monitoring protocol for detecting the degree of sensitization in 5xxx series alloys that accounts for lot-to-lot variability. 5xxx series aluminum alloys have been utilized in marine applications to reduce weight and lower the center of gravity of ships for many decades. While effective, they can become susceptible to intergranul ...

    STTR Phase I 2018 Department of DefenseNavy
  9. Multi-Modal Sensing of Sensitization and Stress Corrosion Cracking Susceptibility in AA5xxx Alloys

    SBC: Luna Innovations Incorporated            Topic: N18AT010

    In order to travel faster, travel longer, and carry larger payloads, new Navy ships are being designed with light weight alloys and composite materials. High magnesium AA5xxx series alloys provide a high strength to weight ratio and excellent corrosion resistance, but suffer from sensitization as anodic ß precipitates (Al¬3Mg2) are form along grain boundaries due to a combination of elevated tem ...

    STTR Phase I 2018 Department of DefenseNavy
  10. Mentoring and Responsive Learning through Intelligent Nautical Skill-modeling, Prompting, Intervention, and Feedback during Instructor-Controlled Exer

    SBC: Charles River Analytics, Inc.            Topic: N18AT014

    The safety and operational success of the U.S. Navy (USN) depends on expert navigation, seamanship, and shiphandling skills. Tragically, the Navy experienced four major incidents in 2017. The resulting USN Comprehensive Review identified lapses in basic seamanship and safe navigation skills as contributing factors, reinforcing the critical need for rigorous shiphandling training and proficiency as ...

    STTR Phase I 2018 Department of DefenseNavy
US Flag An Official Website of the United States Government