You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Reverse Engineering of MILSTAR Battery Pack
SBC: MAINSTREAM ENGINEERING CORP Topic: DLA182003Increased competition and improved lead times are desired by the Defense Logistics Agency (DLA) for the MILSTAR system battery assembly. Mainstream Engineerings unique integration of engineering, manufacturing, quality control, and integrated logistics support (ILS) provides the government with the best value for the proposed NSN.The MILSTAR nickel-metal hydride battery pack lacks sufficient comme ...
SBIR Phase I 2018 Department of DefenseDefense Logistics Agency -
Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.
SBC: ARCTOS Technology Solutions, LLC Topic: DLA18A001Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...
STTR Phase I 2018 Department of DefenseDefense Logistics Agency -
Virus-Like Particle Based pan-Marburgvirus Vaccine
SBC: LUNA INNOVATIONS INCORPORATED Topic: CBD18A002Marburg virus (MARV) is a filamentous enveloped non-segmented negative sense RNA virus. This viruse is considered to be extremelydangerous with case fatality rates as high as 88-90%. Extensive efforts have gone towards effective vaccines for MARV prevention, however,none have been successfully established as licensed vaccines. Glycoprotein (GP) is the only surface protein of MARV. There are substa ...
STTR Phase I 2018 Department of DefenseOffice for Chemical and Biological Defense -
Novel Circulating RNA-based Markers as Diagnostic Biomarkers of Infectious Diseases
SBC: CFD RESEARCH CORPORATION Topic: CBD18A001In resource limited settings, rapid and accurate diagnosis of infections is critical for managing potential exposures to highly virulent pathogens,whether occurring from an act of bioterrorism or a natural event. This is especially important for hard to detect intracellular bacterial andalphavirus infections, that overlap symptomatically and often treated empirically due to a lack of reliable and ...
STTR Phase I 2018 Department of DefenseOffice for Chemical and Biological Defense -
Smart Baseplate for Additive Manufacturing
SBC: LUNA INNOVATIONS INCORPORATED Topic: DLA18A001Additive manufacturing (AM) has rapidly evolved into a valuable technique for making parts which, at times, cannot be fabricated through conventional machining methods.One challenge in the area of AM is the lack of real-time feedback on the fabrication process and the quality of the part being made.This is especially critical given the relatively long periods of time that complex parts can require ...
STTR Phase I 2018 Department of DefenseDefense Logistics Agency -
NanoSonic Sourcing of NSN 8010-01-266-6576 Epoxy Primer Coating
SBC: NANOSONIC INC. Topic: DLA181005Through the Defense Logistics Agency (DLA) SBIR program, NanoSonic will qualify as an Approved Source for NSN: 8010-01-266-6576 Epoxy Primer Coating DLA Supply Chain: C&E Weapon System: B-2 Part Description:MILSPEC Part Number M85582-2-C2-001P, Dark Green.During the program, NanoSonic will reproduce the primer per requisite technical information via expertise in both coating synthesis and blend co ...
SBIR Phase I 2018 Department of DefenseDefense Logistics Agency -
Source Approval for B-52 Wing to Fairing Seal
SBC: MAINSTREAM ENGINEERING CORP Topic: DLA181007Increased competition and improved lead times are desired by the Defense Logistics Agency (DLA) for a number of NESO items with annual demand values over $10,000 and fewer than two approved sources. Mainstream Engineerings unique integration of engineering, manufacturing, quality control, and integrated logistics support (ILS) provides the government with the best value for the proposed NSN.The B- ...
SBIR Phase I 2018 Department of DefenseDefense Logistics Agency -
Computerized Robotic Delayering and Polishing System
SBC: SPECTRAL ENERGIES LLC Topic: DMEA172001The proposed research and technical objectives in this project deal with computerized automatic delayering and polishing system that would be applicable to both commercial and government semiconductor device research and development with applications including Failure Analysis (FA), Fault Isolation (FI), and Reverse Engineering (RE) of semiconductor microelectronic devices. This project could help ...
SBIR Phase I 2018 Department of DefenseDefense Microelectronics Activity -
Additive Manufacturing Process Monitoring and Control Technologies
SBC: Made In Space, Inc. Topic: DLA181002Made In Space, Inc. (MIS) and Siemens PLM Software propose an integrated Automated Processing. Monitoring, Control and Remediation System (Aul) to provide a process monitoring and control capability. Made In Space, Inc. leads the effort based on integrating Made In Space, Inc., proven inspection sensors systems with a Digital Thread for Additive Manufacturing (DTAM) system, co-developed by Siemens ...
SBIR Phase I 2018 Department of DefenseDefense Logistics Agency -
Additive Manufacturing Process Monitoring and Control Technologies
SBC: ARCTOS Technology Solutions, LLC Topic: DLA181002This project aims to make Laser Powder Bed Fusion (LPBF) additive manufacturing a practical tool for supply chain management for the Defense Logistics Agency.The key step is developing process standardization to make LBPF quality vendor independent. This project will seek to demonstrate the use of a promising high speed melt pool monitoring device as a practical means to establish such process sta ...
SBIR Phase I 2018 Department of DefenseDefense Logistics Agency