You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. AC Impedance Sensor for Collective Protection Filter Residual Life Indicator

    SBC: Guild Associates, Inc.            Topic: CBD10106

    Guild Associates, Inc. proposes to develop and evaluate an active electrochemical sensor based residual life indicator (RLI) for adsorptive carbon filters. The sensing system of the RLI will operate by analyzing the electrochemical state of the carbon within the filter and evaluate the remaining adsorptive reactive capacities of the filter. The sensor design will be challenged against an array of ...

    SBIR Phase I 2010 Department of DefenseOffice for Chemical and Biological Defense
  2. Additive Manufacturing Process Monitoring and Control Technologies

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA181002

    This project aims to make Laser Powder Bed Fusion (LPBF) additive manufacturing a practical tool for supply chain management for the Defense Logistics Agency.The key step is developing process standardization to make LBPF quality vendor independent. This project will seek to demonstrate the use of a promising high speed melt pool monitoring device as a practical means to establish such process sta ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  3. Additive Manufacturing Process Monitoring and Control Technologies

    SBC: Made In Space, Inc.            Topic: DLA181002

    Made In Space, Inc. (MIS) and Siemens PLM Software propose an integrated Automated Processing. Monitoring, Control and Remediation System (Aul) to provide a process monitoring and control capability. Made In Space, Inc. leads the effort based on integrating Made In Space, Inc., proven inspection sensors systems with a Digital Thread for Additive Manufacturing (DTAM) system, co-developed by Siemens ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  4. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA18A001

    Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  5. Affinity Matrix System for Large-Scale Protein Purification

    SBC: Luna Innovations Incorporated            Topic: CBD12102

    Though vast improvements have been made in various protein expression platforms, limitations arise in the implementation of current purification methods. Traditional chromatographic methods are time intensive, carry heavy material costs, and are difficult to scale - reducing the benefits achieved in protein expression. Affinity-binding methods are promising for scale-up and swiftness of purificati ...

    SBIR Phase I 2013 Department of DefenseOffice for Chemical and Biological Defense
  6. An automated, high throughput, resin-free device for large scale protein purification

    SBC: CFD Research Corporation            Topic: CBD12102

    Protein manufacturing is of paramount importance to chemical and biological defense applications. High-throughput protein purification is a critical need for rapidly scaling the target protein product. Existing purification methods primarly rely on synthetic-resin based chromatography, which is time-consuming, labor-intensive, expensive, and consequently, ill-suited for developing rapid countermea ...

    SBIR Phase I 2013 Department of DefenseOffice for Chemical and Biological Defense
  7. A Novel, Aerodynamics-augmented Continuous Ionization System for Electrostatic Collection of Bioaerosols

    SBC: CFD Research Corporation            Topic: CBD12107

    Safe and efficient air ionization and filtration technology compatible to biodefense applications is of paramount importance. Current ionization methods are energy-intensive, costly, prone to ozone generation, or inefficient, and consequently ill-suited for building protection applications. To overcome these issues, we propose to develop and demonstrate a novel bioaerosol ionization and collection ...

    SBIR Phase I 2013 Department of DefenseOffice for Chemical and Biological Defense
  8. A Novel Microfludic Device for Drug Toxicity Studies

    SBC: CFD Research Corporation            Topic: CBD10103

    Current drug discovery and development programs are severely limited by the expensive animal trials and oversimplified in vitro models. Results obtained from the in vitro models are not predictive of in vivo toxicity owing to significant difference in testing from the in vivo physiological conditions. In this context, we propose to develop and demonstrate a novel microfluidic device for quantitati ...

    SBIR Phase I 2010 Department of DefenseOffice for Chemical and Biological Defense
  9. ARCH Technology for a Simple, Resilient, and Cost-Effective Auto- Injector

    SBC: AktiVax, Inc.            Topic: CBD13106

    A prefilled auto-injector device for storing a beneficial agent in a dry and stable format alongside a diluent, and automatically delivering the beneficial agent to a patient after reconstitution. The device comprises an automatic needle insertion mechanism and automatic needle retraction mechanism and is safe and disabled after use. The primary drug container of the auto-injector is made from ...

    SBIR Phase I 2013 Department of DefenseOffice for Chemical and Biological Defense
  10. Complex Crystalloid Resuscitative Fluid

    SBC: GanD, Inc.            Topic: DHA172009

    The published data has demonstrated that the currently available resuscitation fluids have detrimental effects on trauma outcomes.By addressing these deficiencies it is expected that the outcomes will improve. The crystalloid based resuscitation fluid in development by GanD Inc. has been designed to address all of the shortcomings of the currently available solutions.The solution, GND-001, is a cr ...

    SBIR Phase I 2018 Department of DefenseDefense Health Agency
US Flag An Official Website of the United States Government