You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Fidelity Enhancement of Nuclear Power Plant Simulators Utilizing High Fidelity Simulation Predictions

    SBC: WESTERN SERVICES CORPORATION            Topic: 30c

    Accurate simulation of nuclear power plant behavior is necessary for both engineering and training applications. An engineering grade simulator, used for design, safety analysis and operations, is characterized by high fidelity, computational power, lack of real-time capability, and user non-interactive environment. By contrast, a training grade simulator, used for operator training and education, ...

    STTR Phase I 2018 Department of Energy
  2. A Concrete Additive Manufacturing Process for Fixed and Floating Wind Turbine Foundations and Towers

    SBC: JC Solutions            Topic: 14b

    Tall towers and foundations for modern offshore and land-based wind turbines are too large to transport over roads or rail due to their extremely large dimensions. Existing “one-off” on-site construction methods are too expensive, and are too slow for manufacturing foundations and towers in the large numbers needed, especially for offshore components manufactured in ports with limited lay-down ...

    STTR Phase I 2018 Department of Energy
  3. Low-cost, time-resolved chemical characterization of atmospheric aerosols

    SBC: AEROSOL DEVICES INC            Topic: 23b

    Currently the chemical composition of atmospheric particulate matter is measured either by off-line analyses of time-integrated filter samples, or by in-situ instruments requiring near-constant operator oversight. These measurement approaches result in sparse or limited data coverage. Despite the critical role of composition on the health and environmental impacts of particulate matter, there exis ...

    STTR Phase I 2018 Department of Energy
  4. Additive Manufacturing of Scalable 3D Resonators

    SBC: GLOBAL RESEARCH & DEVELOPMENT INC            Topic: 29b

    This proposal is submitted in response to the SBIR/STTR Office of Science related to Quantum Information Science (QIS) Supporting Technologies. There is the need for fabrication techniques for scalable 3D Superconducting Radio Frequency (SRF) Structures for Quantum Information Systems. In this proposal we will develop an additive manufacturing approach to developing superconducting 3D microwave re ...

    STTR Phase I 2018 Department of Energy
  5. Low-cost and Flexible Transparent Electrodes Based on Ag–ZTOF (Zn–Sn–O–F) Amorphous Composites Through Ink-jet Printing

    SBC: HAZEN RESEARCH, INC.            Topic: 09b

    Sn-doped In2O3 (ITO) is the industry standard and most widely used transparent conducting electrode (TCE) because of its good electrical and optical properties. However, ITO has a number of disadvantages: ITO is not a suitable TCE for next-generation, high-efficiency, flexible OLEDs, because of its inappropriate work function, difficulty in creating desired patterns, low stability, delaminantion d ...

    STTR Phase I 2018 Department of Energy
  6. Plug-In Hybrid Vehicle Optimization Using Vehicle-to-Cloud Connectivity

    SBC: Macchina, LLC            Topic: 13c

    Plug-in hybrid electric vehicles (PHEVs) represent a growing segment of the U.S. passenger vehicle market. An increasing number of PHEV models are available to consumers. PHEVs are similar to parallel hybrid vehicles like the Toyota Prius in that they have an electric motor and internal combustion engine that are used synergistically to significantly reduce fuel consumption while maintaining a nea ...

    STTR Phase I 2018 Department of Energy
  7. Development of Burst-mode Laser based High-speed Microwave and Thomson Scattering Instruments for Fusion Plasma Devices

    SBC: SPECTRAL ENERGIES LLC            Topic: 21a

    Fusion plasma devices at various DOE and international facilities need high-speed diagnostic tools to understand, predict, and control fusion plasmas. Thomson scattering (TS) at tens of Hz has routinely measured electron temperature (Te) and electron number density (ne) inside the plasma system. However, at these data rates traditional TS can obtain only a sparse data set, which significantly limi ...

    STTR Phase I 2018 Department of Energy
  8. Nanoparticle Catalytic Discovery using Machine Learning Models with Chemisorption Inputs

    SBC: BIENA TECH LLC            Topic: 06a

    The mechanisms guiding nanocatalysis are poorly understood and extremely hard to model. Proposed effort attempts to provide a machine learning based platform that would guide the design of nanocatalytic materials for a variety of applications, beginning with the use of case of chloro-organic contaminant remediation. The current approaches either use conventional molecular dynamics coupled with ab ...

    STTR Phase I 2018 Department of Energy
  9. Brain Targeting Nanoparticle for Drug Delivery in Traumatic Brain Injury

    SBC: WEINBERG MEDICAL PHYSICS, INC.            Topic: DHA18A001

    There is an urgent need to bypass or cross the blood brain barrier (BBB) to deliver drugs for TBI treatment. This project aims to develop targted intranasally delivered, magnetically propulsed, and targted nanoparticles for traumatic brain injury (TBI). In Phase I, we will demonstrate the design, fabrication, and in vitro characterization of proposed drug laden magnetic nanoparticles as well as co ...

    STTR Phase I 2018 Department of DefenseDefense Health Agency
  10. Ultrafast Electron Microscopy Module to Upgrade Existing Commercial Electron Microscopes

    SBC: Niowave, Inc.            Topic: 11a

    This project will develop a flexible longitudinal electron optical system based on high-precision radio-frequency cavities for short and intense electron bunch compressions, both in the energy and time domains. The proposed system is designed to be insertable into an existing transmission electron microscope column to upgrade its temporal resolution. Active phase-space control enables broad ranges ...

    STTR Phase I 2018 Department of Energy
US Flag An Official Website of the United States Government