You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Additive Manufacturing of Scalable 3D Resonators

    SBC: GLOBAL RESEARCH & DEVELOPMENT INC            Topic: 29b

    This proposal is submitted in response to the SBIR/STTR Office of Science related to Quantum Information Science (QIS) Supporting Technologies. There is the need for fabrication techniques for scalable 3D Superconducting Radio Frequency (SRF) Structures for Quantum Information Systems. In this proposal we will develop an additive manufacturing approach to developing superconducting 3D microwave re ...

    STTR Phase I 2018 Department of Energy
  2. Variable Flux Machines for Hybrid Electric Vehicles

    SBC: ASYMMETRIC TECHNOLOGIES, LLC            Topic: 13b

    The majority of hybrid electric vehicles and electric vehicles (HEV/EV) products use interior permanent magnet (IPM) synchronous machines for traction purpose due to the efficiency and power density consideration. IPM machines use high energy density rare earth based magnet materials such as neodymium and dysprosium. Variable flux (VF) machines using abundant and cheaper soft magnets such as AlNiC ...

    STTR Phase I 2018 Department of Energy
  3. Low-cost and Flexible Transparent Electrodes Based on Ag–ZTOF (Zn–Sn–O–F) Amorphous Composites Through Ink-jet Printing

    SBC: HAZEN RESEARCH, INC.            Topic: 09b

    Sn-doped In2O3 (ITO) is the industry standard and most widely used transparent conducting electrode (TCE) because of its good electrical and optical properties. However, ITO has a number of disadvantages: ITO is not a suitable TCE for next-generation, high-efficiency, flexible OLEDs, because of its inappropriate work function, difficulty in creating desired patterns, low stability, delaminantion d ...

    STTR Phase I 2018 Department of Energy
  4. Nanoparticle Catalytic Discovery using Machine Learning Models with Chemisorption Inputs

    SBC: BIENA TECH LLC            Topic: 06a

    The mechanisms guiding nanocatalysis are poorly understood and extremely hard to model. Proposed effort attempts to provide a machine learning based platform that would guide the design of nanocatalytic materials for a variety of applications, beginning with the use of case of chloro-organic contaminant remediation. The current approaches either use conventional molecular dynamics coupled with ab ...

    STTR Phase I 2018 Department of Energy
  5. A Concrete Additive Manufacturing Process for Fixed and Floating Wind Turbine Foundations and Towers

    SBC: JC Solutions            Topic: 14b

    Tall towers and foundations for modern offshore and land-based wind turbines are too large to transport over roads or rail due to their extremely large dimensions. Existing “one-off” on-site construction methods are too expensive, and are too slow for manufacturing foundations and towers in the large numbers needed, especially for offshore components manufactured in ports with limited lay-down ...

    STTR Phase I 2018 Department of Energy
  6. Plug-In Hybrid Vehicle Optimization Using Vehicle-to-Cloud Connectivity

    SBC: Macchina, LLC            Topic: 13c

    Plug-in hybrid electric vehicles (PHEVs) represent a growing segment of the U.S. passenger vehicle market. An increasing number of PHEV models are available to consumers. PHEVs are similar to parallel hybrid vehicles like the Toyota Prius in that they have an electric motor and internal combustion engine that are used synergistically to significantly reduce fuel consumption while maintaining a nea ...

    STTR Phase I 2018 Department of Energy
  7. Development of Burst-mode Laser based High-speed Microwave and Thomson Scattering Instruments for Fusion Plasma Devices

    SBC: SPECTRAL ENERGIES LLC            Topic: 21a

    Fusion plasma devices at various DOE and international facilities need high-speed diagnostic tools to understand, predict, and control fusion plasmas. Thomson scattering (TS) at tens of Hz has routinely measured electron temperature (Te) and electron number density (ne) inside the plasma system. However, at these data rates traditional TS can obtain only a sparse data set, which significantly limi ...

    STTR Phase I 2018 Department of Energy
  8. Microfluidic Printing of High Performance Microgrids for High Efficiency, Flexible Organic Light Emitting Diodes

    SBC: ELECTRONINKS INCORPORATED            Topic: 09b

    Currently, indium tin oxide (ITO) is used as the transparent conductive anode in all commercial organic light emitting diodes (OLEDs). However, ITO has economic and technological limitations for OLEDs such as high cost, brittleness, and poor performance. The primary objective of this Small Business Technology Transfer (STTR) Phase I proposal is to demonstrate the microfluidic printing of substrate ...

    STTR Phase I 2018 Department of Energy
  9. 100 Gbps Radiation Tolerant Optical Transceiver

    SBC: PHOTON SCIENCES, INCORPORATED            Topic: 27d

    High-radiation environments such as the Large Hadron Collider, (LHC) need components which are rad hard to a level of hundreds of Mrad. In addition, because the LHC will receive a high luminosity (HL) upgrade, the data produced will need to be transmitted at the rate of 10’s to 100’s of Tbps. In addition, the solution needs to be low mass. This will be accomplished using an array-able rad hard ...

    STTR Phase I 2018 Department of Energy
  10. Novel Circulating RNA-based Markers as Diagnostic Biomarkers of Infectious Diseases

    SBC: CFD RESEARCH CORPORATION            Topic: CBD18A001

    In resource limited settings, rapid and accurate diagnosis of infections is critical for managing potential exposures to highly virulent pathogens,whether occurring from an act of bioterrorism or a natural event. This is especially important for hard to detect intracellular bacterial andalphavirus infections, that overlap symptomatically and often treated empirically due to a lack of reliable and ...

    STTR Phase I 2018 Department of DefenseOffice for Chemical and Biological Defense
US Flag An Official Website of the United States Government