You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Novel Module Architecture Development for Increased Reliability and Reduced Costs

    SBC: Creative Light Source, Inc            Topic: 07a

    Statement of Problem: The US DOE has set a goal to advance photovoltaics (PV) technology to reach installed costs of less than $1/Watt. This requires module costs below $0.50/ Watt. Thin film PV provides the lowest documented production cost per watt ($0.67) of any PV technology. Module reliability has a direct impact on the levalized cost of energy (LCOE), or the cost of the energy produced by ...

    STTR Phase I 2013 Department of Energy
  2. A microfluidic ice nucleating particle counter for continuous measurements from small aerial platforms

    SBC: Handix Scientific Inc.            Topic: 23a

    Quantifying atmospheric aerosol, clouds and precipitation processes are critical needs for understanding and interpreting Earth’s changing energy budget, is a DOE objective, and is of broader benefit to the public. Specifically, the formation of ice in the atmosphere depends on the nature and abundance of ice nucleating particles, and has major implications for precipitation and cloud interactio ...

    STTR Phase I 2018 Department of Energy
  3. Low-cost, time-resolved chemical characterization of atmospheric aerosols

    SBC: AEROSOL DEVICES INC            Topic: 23b

    Currently the chemical composition of atmospheric particulate matter is measured either by off-line analyses of time-integrated filter samples, or by in-situ instruments requiring near-constant operator oversight. These measurement approaches result in sparse or limited data coverage. Despite the critical role of composition on the health and environmental impacts of particulate matter, there exis ...

    STTR Phase I 2018 Department of Energy
  4. Recovery Act- Scale-up of the Nanomanufacturing of Coated Powders for Superior Battery Electrode Materials

    SBC: ALD NANOSOLUTIONS, INC            Topic: 09b

    There is significant opportunity for energy efficiency improvements in the industrial and manufacturing sectors in the U.S., both from the production and consumption perspective. Higher energy density battery materials will play a role in both, through improved storage of electricity from renewable sources, the enabling of electric vehicles, and through the development of longer lasting, higher po ...

    STTR Phase I 2010 Department of Energy
  5. Synthesis of a Potential Fast Ionic Conductor for Mg+ Ions

    SBC: POWDERMET INC            Topic: 15b

    Development of a solid with high conductivity of Mg2+ cations will allow application of that substance as membrane in magnesium-air batteries. These batteries will be much cheaper, safer, and at the same time store much more energy than lead-, lithium- or sodium batteries with the same weight. Such batteries would be ideal for electric vehicles and for the off-peak storage of renewable elect ...

    STTR Phase I 2013 Department of Energy
  6. Virtual Accelerator Support for HPC Clouds

    SBC: RNET TECHNOLOGIES INC            Topic: 02a

    Due to huge levels of computing parallelism and higher performance per watt, comuting accelerators are crucial for increasing HPC efficiency. This is economically significant for small and medium size manufacturing companies (SMMs) and essential for transition to Exascale computing. However, due to high procurement costs, in-house maintenance of an accelerated HPC cluster is prohibitive for many ...

    STTR Phase I 2013 Department of Energy
  7. Carbon Nanotube-based Solar Water Heater

    SBC: SOLARNO INC            Topic: 03e

    Solar water heaters are a well-established renewable energy technology that has been widely adopted outside of the United States. Here we propose to significantly improve the evacuated solar tube collectors (ETC) by utilizing the dry-drawable carbon nanotube (CNT) sheets for solar energy absorption and CNT multifunctional nanocomposites with functional layers of heat accumulators and heat transpo ...

    STTR Phase I 2013 Department of Energy
  8. Bio-mathematical Models of Aggregated Tissues & Organ Properties

    SBC: Corvid Innovation LLC            Topic: DHP16A001

    Realistic surgical simulation requires a combination of representative tissue geometry, accurate tissue material properties and lifelike tool-tissue interaction forces. Recent advances in computational power and imaging modalities have provided the capability to represent the anatomical details required for surgical training; however, the mathematical models which govern the underlying tissue pro ...

    STTR Phase I 2016 Department of DefenseDefense Health Agency
  9. Low-Cost, High-Accuracy, Whole-Building Carbon Dioxide Monitoring for Demand Control Ventilation

    SBC: DIOXIDE MATERIALS, INC.            Topic: 11

    The objective of the proposed work is to develop, demonstrate, and evaluate new technologies for low-cost, high-accuracy, whole-building CO2 monitoring for demand control ventilation. The work builds on a private/public partnership formed between Dioxide MaterialsTM and the Institute for Sensing and Embedded Network Systems Engineering (I-SENSE) at Florida Atlantic University. In previous, NSF-sup ...

    STTR Phase I 2016 Department of Energy
  10. Micro-electrocatalytic Upgrading of Carbon Dioxide to Hydrocarbons

    SBC: Faraday Technology, Inc.            Topic: 18

    Statement of the problem or situation that is being addressed in your application. Coal-generated power represents a major source of electrical generation in the Nation, and will likely remain so for the foreseeable future. However, recently proposed limits on CO2 emissions from new electrical generation capacity will necessitate carbon capture functions to be installed on any new coal-fired power ...

    STTR Phase I 2016 Department of Energy
US Flag An Official Website of the United States Government