You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. ADAPT-MP: Auto-Diagnostic Adaptive Precision Trainer for Myoelectric Prosthetic users

    SBC: Design Interactive, Inc            Topic: DHP14011

    TBD

    SBIR Phase I 2014 Department of DefenseDefense Health Agency
  2. Additive Manufacturing Process Monitoring and Control Technologies

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA181002

    This project aims to make Laser Powder Bed Fusion (LPBF) additive manufacturing a practical tool for supply chain management for the Defense Logistics Agency.The key step is developing process standardization to make LBPF quality vendor independent. This project will seek to demonstrate the use of a promising high speed melt pool monitoring device as a practical means to establish such process sta ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  3. Additive Manufacturing Process Monitoring and Control Technologies

    SBC: Made In Space, Inc.            Topic: DLA181002

    Made In Space, Inc. (MIS) and Siemens PLM Software propose an integrated Automated Processing. Monitoring, Control and Remediation System (Aul) to provide a process monitoring and control capability. Made In Space, Inc. leads the effort based on integrating Made In Space, Inc., proven inspection sensors systems with a Digital Thread for Additive Manufacturing (DTAM) system, co-developed by Siemens ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  4. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA18A001

    Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  5. Advanced Battery Manufacturing Technologies

    SBC: Xerion Advanced Battery Corp.            Topic: DLA142001

    Xerion Advanced Battery Corp (XABC) proposes Advanced Battery Manufacturing Techniques for High Performance, Low Cost Lithium Ion Batteries. XABC has developed a 3D battery electrode called StructurePore that allows for rapid ion and electron transport, enabling 5 minute charge times at 280Wh/kg on a positive + negative electrode basis. StructurePore batteries utilize a novel manufacturing metho ...

    SBIR Phase I 2014 Department of DefenseDefense Logistics Agency
  6. Advanced Forging Manufacturing Innovations

    SBC: SCIENTIFIC FORMING TECHNOLOGIES CORPORATION            Topic: DLA122001

    Forging process is widely used in the manufacture of critical mission sensitive components that require high strength and better consistent performance in service conditions. Process modeling for forging processes has been very successful in the last three decades. Modeling forging process serves us a virtual tryout tool and it offers lot more details about the forging process and parts than an e ...

    SBIR Phase I 2014 Department of DefenseDefense Logistics Agency
  7. Advanced Transparent Armor Materials and Manufacturing Methods

    SBC: TRANSPARENT ARMOR SOLUTIONS INC.            Topic: SOCOM14002

    This proposal offers the development of an advanced lightweight transparent armor that combines lightweight glass, Gemini spaced armor technology, advanced Quintium polymer and a proprietary thermoset interlayer (TAS1411) to reduce weight by more than 30% of the current state of the art. Ballistic testing will be completed at both elevated and low temperatures. Environmental testing will demonst ...

    SBIR Phase I 2014 Department of DefenseSpecial Operations Command
  8. A Human Body Model for Computational Assessment of Blast Injury and Protection

    SBC: Hypercomp, Inc.            Topic: DHP13010

    In this proposal, a team comprising of HyPerComp and Aerojet-Rocketdyne shall create a computational system for the detailed modeling of the interaction of the human body with blast waves. The model will be able to address complex geometry and physics of the blast scene, as well as anatomical detail of the human body with adequate resolution. Nonlinear equations of state, adapted to individual tis ...

    SBIR Phase I 2014 Department of DefenseDefense Health Agency
  9. A Neck Injury Assessment Tool

    SBC: CFD Research Corporation            Topic: DHP13009

    The overall objective of the proposed project is to develop new injury criteria, methodology, and a software tool to assess the risk of neck injury from loads sustained while wearing head supported mass (HSM). In this Phase I, we will develop an easy-to-use software which utilizes a detailed neck musculoskeletal model (scalable to the full range of male and female anthropometries) for the study of ...

    SBIR Phase I 2014 Department of DefenseDefense Health Agency
  10. Application of a Wireless Finger-mounted Ultrasound Transducer and Imaging Platform

    SBC: SONIVATE MEDICAL, INC.            Topic: DHP14006

    We propose to develop a wireless, battery powered, finger-worn ultrasound probe and wearable system capable of performing the FAST exam for use in the battlefield. The system will be based on the SonicEye? FAST exam probe, developed with DOD funding, with demonstrated capability of performing the FAST exam. This proposal also leverages a miniature beamformer currently under development with DOD f ...

    SBIR Phase I 2014 Department of DefenseDefense Health Agency
US Flag An Official Website of the United States Government