You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
AC Impedance Sensor for Collective Protection Filter Residual Life Indicator
SBC: GUILD ASSOCIATES INC Topic: CBD10106Guild Associates, Inc. proposes to develop and evaluate an active electrochemical sensor based residual life indicator (RLI) for adsorptive carbon filters. The sensing system of the RLI will operate by analyzing the electrochemical state of the carbon within the filter and evaluate the remaining adsorptive reactive capacities of the filter. The sensor design will be challenged against an array of ...
SBIR Phase I 2010 Department of DefenseOffice for Chemical and Biological Defense -
Additive Manufacturing Process Monitoring and Control Technologies
SBC: ARCTOS Technology Solutions, LLC Topic: DLA181002This project aims to make Laser Powder Bed Fusion (LPBF) additive manufacturing a practical tool for supply chain management for the Defense Logistics Agency.The key step is developing process standardization to make LBPF quality vendor independent. This project will seek to demonstrate the use of a promising high speed melt pool monitoring device as a practical means to establish such process sta ...
SBIR Phase I 2018 Department of DefenseDefense Logistics Agency -
Additive Manufacturing Process Monitoring and Control Technologies
SBC: Made In Space, Inc. Topic: DLA181002Made In Space, Inc. (MIS) and Siemens PLM Software propose an integrated Automated Processing. Monitoring, Control and Remediation System (Aul) to provide a process monitoring and control capability. Made In Space, Inc. leads the effort based on integrating Made In Space, Inc., proven inspection sensors systems with a Digital Thread for Additive Manufacturing (DTAM) system, co-developed by Siemens ...
SBIR Phase I 2018 Department of DefenseDefense Logistics Agency -
Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.
SBC: ARCTOS Technology Solutions, LLC Topic: DLA18A001Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...
STTR Phase I 2018 Department of DefenseDefense Logistics Agency -
Advanced Real-Time Surface Contamination Sensor
SBC: DBC Technology Corp. Topic: CBD13103A new and promising algorithm is proposed based on hyperspectral unmixing by a sequential processor that will be further developed for data fusion to both enhance sensor sensitivity and eliminate the need for separate background interrogation, thereby allowing for fast real time detection. Sensor sensitivity will be improved by a combination of passive FTIR spectroscopy, and active thermal imagin ...
SBIR Phase I 2013 Department of DefenseOffice for Chemical and Biological Defense -
Algorithms for Look-down Infrared Target Exploitation
SBC: SIGNATURE RESEARCH, INC. Topic: 1Signature Research, Inc. (SGR) and Michigan Technological University (MTU) propose a Phase I STTR effort to develop a learning algorithm which exploits the spatio-spectral characteristics inherent within IR imagery and motion imagery.Our archive of modelled and labeled data sets will allow our team to thoroughly capture the variable elements that will drive machine learning performance.The overall ...
STTR Phase I 2018 Department of DefenseNational Geospatial-Intelligence Agency -
An automated, high throughput, resin-free device for large scale protein purification
SBC: CFD RESEARCH CORPORATION Topic: CBD12102Protein manufacturing is of paramount importance to chemical and biological defense applications. High-throughput protein purification is a critical need for rapidly scaling the target protein product. Existing purification methods primarly rely on synthetic-resin based chromatography, which is time-consuming, labor-intensive, expensive, and consequently, ill-suited for developing rapid countermea ...
SBIR Phase I 2013 Department of DefenseOffice for Chemical and Biological Defense -
A Novel, Aerodynamics-augmented Continuous Ionization System for Electrostatic Collection of Bioaerosols
SBC: CFD RESEARCH CORPORATION Topic: CBD12107Safe and efficient air ionization and filtration technology compatible to biodefense applications is of paramount importance. Current ionization methods are energy-intensive, costly, prone to ozone generation, or inefficient, and consequently ill-suited for building protection applications. To overcome these issues, we propose to develop and demonstrate a novel bioaerosol ionization and collection ...
SBIR Phase I 2013 Department of DefenseOffice for Chemical and Biological Defense -
A Novel Microfludic Device for Drug Toxicity Studies
SBC: CFD RESEARCH CORPORATION Topic: CBD10103Current drug discovery and development programs are severely limited by the expensive animal trials and oversimplified in vitro models. Results obtained from the in vitro models are not predictive of in vivo toxicity owing to significant difference in testing from the in vivo physiological conditions. In this context, we propose to develop and demonstrate a novel microfluidic device for quantitati ...
SBIR Phase I 2010 Department of DefenseOffice for Chemical and Biological Defense -
ARCH Technology for a Simple, Resilient, and Cost-Effective Auto- Injector
SBC: AKTIVAX, INC. Topic: CBD13106A prefilled auto-injector device for storing a beneficial agent in a dry and stable format alongside a diluent, and automatically delivering the beneficial agent to a patient after reconstitution. The device comprises an automatic needle insertion mechanism and automatic needle retraction mechanism and is safe and disabled after use. The primary drug container of the auto-injector is made from ...
SBIR Phase I 2013 Department of DefenseOffice for Chemical and Biological Defense