Award Data

Spectral Energies and the University of Notre Dame is developing a new class of point-wise sensors for high-enthalpy conditions that rely on the use of a weakly ionized AC discharge between two electrodes as the main sensing element. The advantages of this approach include a native high bandwidth with a theoretical maximum in excess of 15 MHz and a simple mechanical design that is inherently robus ...

Nanoscale infrared detectors are emerging as a potentially powerful alternative to traditional infrared detector technologies. The University of New Mexico has developed dots in a double well (DDWELL) quantum dot infrared photodetectors which have a spectral responsivity that can be tuned by controlling the bias voltage applied. In this Phase II effort, Polaris Sensor and UNM would fabricate a g ...

In this Phase II program, Voxtel will design, manufacture, and benchmark-test additive-manufactured (AM) insulators capable of electrical stress greater than 25 kV/mm, for use in high-electric-field applications, such as high-power microwave (HPM) devices. These insulators will sustain vacuum of 10-7 Torr and withstand 20 psi of pressure. To achieve this goal, Voxtel will synthesize readily additi ...

Our objective is to develop advanced mediator architectures for efficient electron transfer in enzymatic fuel cells (EFCs) for low power systems. The proposed EFC will leverage ongoing research at both CFDRC and Michigan State University to provide a fully-integrated lightweight, low-cost, manufacturable, and renewable power supply, for various military and civilian applications. EFC systems offer ...

For this Phase I SBIR proposal, Vcom3D proposes to design advanced medical moulage that accurately simulates the progression of an injury or pathology by morphing through a series of clinical states to enable learners to confirm the progression of the wound and to determine whether iatrogenic errors or pathologies occurred duing treatment. The physical morphing moulage may be applied to medical m ...

ABSTRACT: Adversarial installations, such as those housing the means for nuclear weapons production, are increasingly being constructed in heavily fortified locations and often using ultra high performance concrete (UHPC) as the construction material. As such, the U.S. Air Force has considerable interest in further developments of ultra high performance concrete (UHPC) to maintain an advantage o ...

The automotive and aerospace industries use topology optimization to minimize structural weight while satisfying functional constraints. However, the industry-standard fictitious material or density approach has been less effective when applied to physics beyond simple structural mechanics. Known issues include: failed numerical convergence or so-called gray material in computed optimal designs, n ...

In partnership with the Strausfeld Lab at the University of Arizona, BNS proposes to develop an Amplitude and Polarization High-speed Image Display (APHID) based on our previous VIS/NIR Hyperspectral Image Projector (HIP) design. Using BNS-developed liquid crystal (LC) spatial light modulators (SLMs), this display will provide high-speed multispectral wide-field visual stimulus to invertebrates ov ...

Thermoelastic structures poses a critical challenge to designers due to the inherent proportionality of the thermal loading on the structural thickness. This is further exacerbated by structural nonlinearity where any out-of-plane deformation further increases the effective loading on the structure. As a result of this, conventional design optimization procedures, which are typically based on line ...

Multi-processor computing systems are growing in capacity and usage. They encompass multiple, distributed implementations as well as heterogeneous, embedded computing architectures. The processing density enabled by such approaches holds promise for unmanned combat air vehicles (UCAVs) with their plethora of mission sensors and command and control processing requirements. However, the software ...