You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Passive Millimeter-Wave Imaging Camera System Using Optical Up-Conversion in Sparse Array Configuration

    SBC: Novaa Ltd            Topic: A18BT017

    The objective of this proposal is to enable high-sensitivity, passive imaging system of natural mm-wave emissions, which can be used as standalone or fused with other imaging modality such as conventional IR imagery in degraded environments. This is achieved through a unique antenna integrated electro-optic (EO) modulator, where received mm-wave signals modulate an optical carrier. The optical car ...

    STTR Phase I 2019 Department of DefenseArmy
  2. Rapid Prototyped 3D Printed Filters for CW Agent Protection

    SBC: TDA Research, Inc.            Topic: A18BT018

    Defense against chemical weapons is a critical DoD requirement. An effective defense requires the development of unique respirator systems that prevent inhalation of chemical warfare (CW) agents. In addition, the protective equipment exposed to CW agents must not pose a residual hazard after use in the battlefield. Existing respirator canisters remove CW agents, but they do not self-decontaminate ...

    STTR Phase I 2019 Department of DefenseArmy
  3. Paper Spray Mass Spectrometry Cartridges with Integrated Sampling and Enrichment

    SBC: Nano Terra, Inc.            Topic: A18BT020

    PS-MS is a simple and powerful method for rapid ambient sample preparation. However, its simplicity also means separation of undesirable components (particulates and molecular interferents) is not possible. Furthermore, samples must be collected by other means (e.g., dried blood spot cards) and placed on the ticket in liquid form before analysis. Although the technique is sensitive (nanograms to t ...

    STTR Phase I 2019 Department of DefenseArmy
  4. Universal textile functionalization chemistry for molecular and particulate attachment based on a novel activation treatment

    SBC: Nano Terra, Inc.            Topic: A18BT024

    Nano Terra and the El-Shafei group (North Carolina State University) propose to demonstrate, optimize and expand a universal platform for textile functionalization. The approach is one developed in the El-Shafei group that has already been explored for its utility in cotton, nylon-cotton blends and polypropylene. The functionalization method imparts a high-level of flame retardancy (without haloge ...

    STTR Phase I 2019 Department of DefenseArmy
  5. W-Band RF Instrumentation

    SBC: Srico Inc            Topic: A18BT002

    W-band millimeter waves have a number of important applications, including directed energy and, more recently, 5G FR2 network development. Reliable measurements of electric fields in the W-Band, while critical to the development of these applications, have proven challenging. This proposal addresses the development of an accurate, traceable, cost effective W-band RF field strength detector. The so ...

    STTR Phase I 2019 Department of DefenseArmy
  6. W-Band RF Instrumentation

    SBC: MAGIQ TECHNOLOGIES, INC.            Topic: A18BT002

    In the program, MagiQ Technologies Inc., in conjunction with professor Gabriel Rebeiz from the University of California, San Diego (UCSD), is proposing a high dynamic range W-band CW/pulse RF power meter for the US Army’s application in the development of W-band radar and satellite communications. Base on unique noise reduction technique in MagiQ technologies, The power meter can operate in a hi ...

    STTR Phase I 2019 Department of DefenseArmy
  7. Metal Additive Manufacturing with Minimal Post Processing (MaMMPP) (18-RD-116)

    SBC: UES, Inc.            Topic: A18BT003

    Metal Additive Manufacturing (AM) research has typically addressed understanding how to maximize performance for an AM material, taking into account microstructural anisotropy, residual stress, defects (such as pores and lack of fusion defects), and surface finish. Optimizing a part then requires significant post processing such as hot isostatic pressing (HIP), heat treatment and surface finishing ...

    STTR Phase I 2019 Department of DefenseArmy
  8. Design of Easy-To-Use Structural Alloy Feedstocks for Additive Manufacturing

    SBC: Elementum 3D, Inc.            Topic: A18BT003

    There is a need for easy-to-use, versatile alloys for additive manufacturing that print consistently regardless of the specific process or machine, or the metallurgical and manufacturing knowledge of the user. Such capability is especially critical for soldiers to be able to make every day items on demand in the theater of war. Toward meeting this need, recent successes developing high performance ...

    STTR Phase I 2019 Department of DefenseArmy
  9. Membraneless Water Purification via Continuous, Self-Contained, Vacuum-Assisted Diffusiophoresis

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: A18BT005

    We propose the development of a membraneless water purification system using continuous, self-contained, vacuum-assisted diffusiophoresis. Using diffusiophoresis allows the system to clean water contaminated with particulates and bacteria without membranes or filters, while producing a stream of fresh, drinkable water. The system will operate using only electricity supplied by portable batteries/s ...

    STTR Phase I 2019 Department of DefenseArmy
  10. Adaptive Distributed Allocation of Probabilistic Tasks (ADAPT)

    SBC: Aptima, Inc.            Topic: A18BT007

    Logistic operations for all branches of the military have historically been a guessing game relying on the intuition and past experience of the responsible officials. Unfortunately, this strategy often means that resources are deployed prematurely to areas that do not have an immediate need, thereby denying those assets to other areas that could have used them immediately. Worse, resources can als ...

    STTR Phase I 2019 Department of DefenseArmy
US Flag An Official Website of the United States Government