Award Data

This NASA sponsored STTR project will investigate methods for close-out of large, liquid rocket engine, nickel or stainless steel nozzle, coolant channels utilizing robotic laser and pulsed-arc additive manufacturing (AM)methods. Structural jacket to coolant channel land area interface strength will be quantified and metallurgical characterization completed.Process optimizations will be conducted ...

To address the urgent need for 3D flash-lidar technology for landing on solar system bodies and for spacecraft rendezvous and docking with satellites, an effort is proposed to fabricate, characterize, and test a versatile, high-sensitivity InGaAs APD 3D flash lidar and to advance the technology-readiness level (TRL) of lidar technologies suitable for NASA mission requirements. Leveraging an existi ...

This Phase II project aims to assemble the key set of sensor modalities that are needed to reliably view the key process anomalies and properties of laser powder bed fusion. The research team will down-select from the Phase I sensors investigated and integrate the sensors into a sensor fusion software package that facilitates data collection and synchronization, and eventually feedback control of ...

This STTR program will mature high density, high regression rate hybrid rocket motor technology through TRL6 through the design, fabrication, and testing of third and fourth stage nanosatellite motors, while preparing designs and sizing for booster stages.nbsp; Hybrid Rockets offer substantially lower cost compared to storable and cryogenic bipropellant systems, but currently suffer from poor pack ...

The proposed Phase II supports completion of the RINGS science missions on ISS using SVGS as real-time sensor for the EMFF maneuver. During Phase I, SVGS-based navigation of RINGS was developed and tested on a 3DOF ground-based platform, and mechanical and electrical integration of RINGS with the free-flying robotic platforms on ISS (Astrobee) was designed in detail. SVGS was deployed and tested o ...

Distributed Spacecraft Missions (DSM) architectures provide unique scientific and programmatic benefits including multipoint in-situ measurements, multi-angle viewpoints, and improved understanding of the connections between separately measured phenomena and their time variations. However, these missions impose significant operational demands on ground tracking resources and mission operators alik ...

We propose the development of a user-friendly software tool for estimating the electric field distributions within spacecraft enclosures based on the Power Balance (PwB) method and enhanced by a database of experimentally determined Absorption Cross-Sections (ACS) of common equipment, components and cables.The software will be built around an already developed PwB solver that determines the statis ...

Plasma Controls, LLC (SBC) and Colorado State University (RI) will mature an energy and species plasma diagnostic for use with plasma thrusters. The combined Energy and Velocity Analyzer for Distributions of Electric Rockets, or the lsquo;E-VADERrsquo;, is needed especially for characterizing the plasma plume of Hall thrusters, where researchers desire to know ion energies and charged species frac ...

Opterus proposes to develop braided thin ply composite tapes. The tapes will be braided from ultra-thin spread-tow unidirectional carbon and glass ribbons and will enable a new source and form factor for thin-ply textiles. The resulting tapes will be especially useful for thin high strain composite space deployable structures where they will allow bias plies in long parts without requiring seams. ...

Today many spacecraft carry two propulsion options: high thrust required for high acceleration maneuvers such as orbit insertion and rapid response; and low thrust required for station keeping and less critical maneuvers. A new class of non-toxic monopropellants, such as AF-M315E and LMP-103S, perform well in both high and low thrust regimes. Significant investments are maturing both monopropellan ...