You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. AC Impedance Sensor for Collective Protection Filter Residual Life Indicator

    SBC: GUILD ASSOCIATES INC            Topic: CBD10106

    Guild Associates, Inc. proposes to develop and evaluate an active electrochemical sensor based residual life indicator (RLI) for adsorptive carbon filters. The sensing system of the RLI will operate by analyzing the electrochemical state of the carbon within the filter and evaluate the remaining adsorptive reactive capacities of the filter. The sensor design will be challenged against an array of ...

    SBIR Phase I 2010 Department of DefenseOffice for Chemical and Biological Defense
  2. Additive Manufacturing Process Monitoring and Control Technologies

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA181002

    This SBIR will demonstrate coaxial thermal imaging using the Stratonics ThermaViz® sensor as a uniquely effective tool for tracking process metrics, at high-speed, during laser powder bed fusion (LPBF). The Phase II project will then develop this sensing technique for LPBF process qualification and closed-loop control. The key is integrating ThermaViz into UTC’s AMSENSE® in situ monitoring arc ...

    SBIR Phase II 2019 Department of DefenseDefense Logistics Agency
  3. Additive Manufacturing Process Monitoring and Control Technologies

    SBC: Made In Space, Inc.            Topic: DLA181002

    Made In Space, Inc. (MIS) proposes an Aulë Filament Inspection System (AFIS) to provide filament quality control capability for additive manufacturing (AM). AFIS enables the Defense Logistics Agency (DLA) to confidently support AM efforts both internal to DLA and throughout its customer base such as the Marine Corp Advanced Manufacturing Operations Cell. To create the product quality line system, ...

    SBIR Phase II 2019 Department of DefenseDefense Logistics Agency
  4. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA18A001

    This Phase II project aims to assemble the key set of sensor modalities that are needed to reliably view the key process anomalies and properties of laser powder bed fusion. The research team will down-select from the Phase I sensors investigated and integrate the sensors into a sensor fusion software package that facilitates data collection and synchronization, and eventually feedback control of ...

    STTR Phase II 2019 Department of DefenseDefense Logistics Agency
  5. Advanced Manufacturing Technologies

    SBC: ONTO TECHNOLOGY, LLC            Topic: DLA152001

    This Phase II Small Business Innovation Research project develops the scale of lithium-ion direct recycling technologies applied to gain efficiencies in materials management from original manufacturing to end-of-life. The scrap materials are from Defense Logistics Agency manufacturing activities. A successful effort moves direct recycle TRL from 4 to 6, increases process throughput, qualifies mate ...

    SBIR Phase II 2019 Department of DefenseDefense Logistics Agency
  6. Advanced Simulated Patient Intelligent Response Engine (ASPIRE)

    SBC: VCOM3D INC            Topic: DHA191002

    The goal of medical simulation-based training such as high-fidelity manikin simulators, part task trainers, and screen-based virtual patients, is to approximate real-life treatment experiences without risk to live patients. While the use of sensors has ma

    SBIR Phase I 2019 Department of DefenseDefense Health Agency
  7. An automated, high throughput, resin-free device for large scale protein purification

    SBC: CFD RESEARCH CORPORATION            Topic: CBD12102

    Protein manufacturing is of paramount importance to chemical and biological defense applications. High-throughput protein purification is a critical need for rapidly scaling the target protein product. Existing purification methods primarly rely on synthetic-resin based chromatography, which is time-consuming, labor-intensive, expensive, and consequently, ill-suited for developing rapid countermea ...

    SBIR Phase I 2013 Department of DefenseOffice for Chemical and Biological Defense
  8. A Novel, Aerodynamics-augmented Continuous Ionization System for Electrostatic Collection of Bioaerosols

    SBC: CFD RESEARCH CORPORATION            Topic: CBD12107

    Safe and efficient air ionization and filtration technology compatible to biodefense applications is of paramount importance. Current ionization methods are energy-intensive, costly, prone to ozone generation, or inefficient, and consequently ill-suited for building protection applications. To overcome these issues, we propose to develop and demonstrate a novel bioaerosol ionization and collection ...

    SBIR Phase I 2013 Department of DefenseOffice for Chemical and Biological Defense
  9. A Novel Microfludic Device for Drug Toxicity Studies

    SBC: CFD RESEARCH CORPORATION            Topic: CBD10103

    Current drug discovery and development programs are severely limited by the expensive animal trials and oversimplified in vitro models. Results obtained from the in vitro models are not predictive of in vivo toxicity owing to significant difference in testing from the in vivo physiological conditions. In this context, we propose to develop and demonstrate a novel microfluidic device for quantitati ...

    SBIR Phase I 2010 Department of DefenseOffice for Chemical and Biological Defense
  10. A rapid and high-throughput microfluidic stem cell analyzer

    SBC: CFD RESEARCH CORPORATION            Topic: OSD11H14

    Current methods to discern the differentiation state of stem cells are time-consuming, labor-intensive, costly, invasive, and consequently, ill-suited for clinical applications. To overcome these limitations, we propose to develop a microfluidic stem cell analyzer for accurate, non-invasive identification of the cell differentiation state in conjunction with automated cell sorting at high-throughp ...

    SBIR Phase II 2013 Department of DefenseDefense Health Agency
US Flag An Official Website of the United States Government