You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Wireless Passive Nanoparticle based Intelligent Sensor System for Extreme Environments
SBC: SENSATEK PROPULSION TECHNOLOGY, INC Topic: T13Sensatek Propulsion Technology, Inc. proposes to demonstrate the feasibility of a wireless, passive, nanoparticle-based sensor system. The sensor in its current form can be used to measure real time temperatures and pressures wirelessly without the need of an external energy source. It should be noted that the same sensing principle can be used for strain monitoring as well. It comprises of a micr ...
STTR Phase I 2018 National Aeronautics and Space Administration -
Vortex Control for Low-Noise DEP Urban Aircraft
SBC: Surfplasma, Inc. Topic: T15Suppression of noise from aircraft is a vital NASA goal, especially important for the vision of Urban Air Mobility. Small urban aircraft may utilize Distributed Electric Propulsion along with advanced structural and electric motor/storage technologies to achieve the necessary flight capability. However, these aircraft utilize propellers or fans to achieve the necessary thrust, with attendant commu ...
STTR Phase I 2019 National Aeronautics and Space Administration -
Validated Engineering Tools for Thin-Ply Composites
SBC: OPTERUS RESEARCH AND DEVELOPMENT, INC Topic: T12Opterus Research and Development, Inc. proposes to develop and validate multi-scale thin-ply High Strain Composites (HSCs) constitutive modeling tools for incorporation into commercial finite element analysis codes. The constitutive models will capture the time-temperature-load-deformation viscoelastic characteristics common to HSCs as well as the yielding or permanent deformation associated with ...
STTR Phase I 2018 National Aeronautics and Space Administration -
Underwater Blast Injury Monitoring
SBC: TRITON SYSTEMS, INC. Topic: DHA17C002Triton Systems, Inc. proposes to develop a piezo-textile that can capture underwater explosion pressure wave patterns to ultimately establish and monitor for injury risk severity. We propose to use a state-of-the-art piezo-textile to which we will apply our own proprietary treatments.We will assess our textiles pressure detection performance and durability against a non-textile piezoelectric array ...
STTR Phase I 2018 Department of DefenseDefense Health Agency -
Testing of COTS Systems in Space
SBC: STREAMLINE AUTOMATION LLC Topic: T6For long duration space missions beyond LEO, the complexity of the missions and the latency of communications with Earth will require HPC systems that would be prohibitively expensive if qualified under traditional guidelines for high reliability space systems. There is a wealth COTS hardware that could potentially be used for HPC systems for non-critical tasks within heavily shielded spacecraft c ...
STTR Phase I 2019 National Aeronautics and Space Administration -
Terahertz Quantum Cascade Laser Based 3D Imaging
SBC: LONGWAVE PHOTONICS LLC Topic: T7The NASA Constellation program has a need to non-destructively test (NDT) non-metallic materials (foams, Shuttle Tile, Avcoat, etc) for defects such as delaminations and voids. While imaging systems at terahertz frequencies (0.3 to 3 THz) have been demonstrated for 2D imaging of similar materials, they have not yet demonstrate full 3D volumetric imaging. To meet this need, LongWave Photonics pro ...
STTR Phase I 2010 National Aeronautics and Space Administration -
Smallsat Swarm Sparse Aperture SAR for Recon and Surveillance (SSSASAfRaS)
SBC: VISSIDUS TECHNOLOGIES INC Topic: T4The goal of the proposed Phase I work is to demonstrate the feasibility of the coordination and control of a low cardinality (n=12) swarm of smallsats that realizes a distributed Synthetic Aperture Radar (SAR) in low Earth orbit. Preliminary mission and spacecraft design work has shown that the swarm can support SAR imaging in the L-band (1.35 GHz) with a ground range resolution finer than 10 m wi ...
STTR Phase I 2018 National Aeronautics and Space Administration -
Regeneratively Cooled Ceramic Matrix Composite Nozzle Assembly for Reduced Weight
SBC: PHYSICAL SCIENCES INC. Topic: T9All rocket missions benefit from having lower structural mass and higher specific impulse, both of which contribute to larger payload fractions and therefore lower mission cost. High temperature materials such as ceramic matrix composites (CMCs) are an avenue to lower engine mass because of the low density and high specific strength of the material. They also have a high maximum temperature and so ...
STTR Phase I 2018 National Aeronautics and Space Administration -
Prediction of Plume Induced Rock Fracture for Landers
SBC: CFD RESEARCH CORPORATION Topic: T9The landing surface damage and liberation of debris particles caused by rocket plume impingement flow during spacecraft propulsive landing on unprepared surfaces of Moon, Mars, and other celestial bodies poses a high risk for robotic and human exploration activities. Simply determining whether the plume induced loads exceed the bedrock bearing capacity threshold is not sufficient. An integrated m ...
STTR Phase I 2018 National Aeronautics and Space Administration -
Power Generating Coverings and Casings
SBC: STREAMLINE AUTOMATION LLC Topic: T301Advances in structured heterogeneity together with nanomaterials tailoring has made it possible to create thermoelectrics using high temperature, polymer composites. While such thermoelectrics do not have the capability to approach the efficiency of top performing ceramic modules such as BiTe, they do provide two unique aspects of use in energy scavenging: the ability to cover large areas easily, ...
STTR Phase I 2013 National Aeronautics and Space Administration