You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. POC Blood Coagulopathy Monitor

    SBC: CFD Research Corporation            Topic: DHA19A001

    Traumatic injuries account for 30% of all life years lost in the US and is the leading cause of death for people under 46 years of age. Uncontrolled bleeding or hemorrhage constitute 30-40% of trauma related deaths and are considered to be a major cause o

    STTR Phase I 2019 Department of DefenseDefense Health Program
  2. Signature Management Textiles

    SBC: Cornerstone Research Group, Incorporated            Topic: A18BT023

    The prolific nature of Advanced Battlefield and Ground surveillance radar (BSR/GSR) in military markets is driving the need to develop new methods of reducing infantry forces’ radar cross section (RCS) in effort to avoid detection and more freely move throughout the battlespace. One approach to combat the growing threat of BSR/GSR surveillance is through the development of advanced textiles that ...

    STTR Phase I 2019 Department of DefenseArmy
  3. Soft and Elastomeric Intramuscular Electrode with Therapeutic Delivery Capability

    SBC: TDA Research, Inc.            Topic: A13AT019

    Approximately 5-6% of military injuries involve some form of major peripheral nerve injury with little chance of spontaneous healing. Currently these injuries lead to major impairment of voluntary muscle function in the limbs and extremities, making tasks of walking, reaching, grasping, etc. very difficult or impossible for many patients. It is not enough to focus therapeutic treatment on the se ...

    STTR Phase I 2013 Department of DefenseArmy
  4. Oxygen Production and Delivery on Demand

    SBC: Global Research and Development Inc.            Topic: DHA17B005

    This proposal is in response to the Defense Health Agency 2017 Phase I SBIR topic 17B-005.The approach is the use of a membrane oxygen pump using newly developed nano-thickness membranes with all the layers less than 1 micron total.Nanometer thickness membranes enable more oxygen output per surface area at temperatures of 300-600 C than current state-of-the -art 600-800 C membranes that are 50-300 ...

    STTR Phase I 2018 Department of DefenseDefense Health Program
  5. Metal Additive Manufacturing with Minimal Post Processing (MaMMPP) (18-RD-116)

    SBC: UES, Inc.            Topic: A18BT003

    Metal Additive Manufacturing (AM) research has typically addressed understanding how to maximize performance for an AM material, taking into account microstructural anisotropy, residual stress, defects (such as pores and lack of fusion defects), and surface finish. Optimizing a part then requires significant post processing such as hot isostatic pressing (HIP), heat treatment and surface finishing ...

    STTR Phase I 2019 Department of DefenseArmy
  6. Conformal Li Metal Batteries Enabled By Microporous Electrodes

    SBC: Navitas Advanced Solutions Group, LLC            Topic: A18BT015

    Navitas will collaborate with the University of Maryland group to develop a flexible microporous Li metal anode. The proposed porous anode will reduce Li dendrite growth via its built-in porosity and increase rate capability via its high surface area. It will enable a conformal, safe, and light weight lithium metal batteries as soldier portable power devices. The Phase I project will demonstrate t ...

    STTR Phase I 2019 Department of DefenseArmy
  7. Passive Millimeter-Wave Imaging Camera System Using Optical Up-Conversion in Sparse Array Configuration

    SBC: Novaa Ltd            Topic: A18BT017

    The objective of this proposal is to enable high-sensitivity, passive imaging system of natural mm-wave emissions, which can be used as standalone or fused with other imaging modality such as conventional IR imagery in degraded environments. This is achieved through a unique antenna integrated electro-optic (EO) modulator, where received mm-wave signals modulate an optical carrier. The optical car ...

    STTR Phase I 2019 Department of DefenseArmy
  8. Membraneless Water Purification via Continuous, Self-Contained, Vacuum-Assisted Diffusiophoresis

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: A18BT005

    We propose the development of a membraneless water purification system using continuous, self-contained, vacuum-assisted diffusiophoresis. Using diffusiophoresis allows the system to clean water contaminated with particulates and bacteria without membranes or filters, while producing a stream of fresh, drinkable water. The system will operate using only electricity supplied by portable batteries/s ...

    STTR Phase I 2019 Department of DefenseArmy
  9. Additive Manufacturing of Multifunctional Nanocomposites

    SBC: Sciperio, Inc.            Topic: A13AT010

    Sciperio with team members Georgia Institute of Technology and Centecorp have teamed up to develop an Additive Manufacturing Composite using nano and micro fillers. The team will develop multi-scale models that are supported by experimental characterization for advanced 3D Printable materials. Inelastic response of high strength hierarchical structures composed of engineered materials and specif ...

    STTR Phase I 2013 Department of DefenseArmy
  10. Runnable Environment for Team Effectiveness and Assessment Metrics (re-TEAM)

    SBC: Modus Operandi, Inc.            Topic: A18BT008

    The most critical component of any modern enterprise is effective use of its human resources. The rise of productivity-boosting applications and wearable sensors has provided individual users with data-driven insights into their own effectiveness. Despite these advancements there has not been a corresponding rise in tools for evaluating and improving the effectiveness of teams as a whole. New wear ...

    STTR Phase I 2019 Department of DefenseArmy
US Flag An Official Website of the United States Government