You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Additive Manufacturing of Metallic Materials for High Strain Rate Applications
SBC: MRL MATERIALS RESOURCES LLC Topic: MDA17T001Metallic additive manufacturing (AM) is an attractive technology for the production of lethality test articles due to the potential for significantly reduced lead time and manufacturing cost.However, in order to be effective in providing accurate lethality data, the properties of the AM material have to match closely the properties of conventionally manufactured alloys found in real threat targets ...
STTR Phase I 2018 Department of DefenseMissile Defense Agency -
Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.
SBC: ARCTOS Technology Solutions, LLC Topic: DLA18A001Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...
STTR Phase I 2018 Department of DefenseDefense Logistics Agency -
An improved passivation process for the fabrication of high performance antimony based III-V superlattice materials
SBC: IRDT Solutions, Inc Topic: MDA12T003Phase I objective is to demonstrate the feasibility of our proposed passivation approach to minimize the dark current noise and improve the quantum efficiency in the GaSb based type II superlattice detectors. Phase I goal is to demonstrate the feasibility of our technology to fabricate photodiodes with cut-off wavelength in excess of 10µm, quantum efficiency exceeding 70% and dark current density ...
STTR Phase I 2013 Department of DefenseMissile Defense Agency -
An Ultra-High Temperature Ceramic with Improved Fracture Toughness and Oxidation Resistance
SBC: Plasma Processes, LLC Topic: MDA09T002Hypersonic missile defense systems are being designed to reach global threats. During flight, external surfaces are predicted to reach temperatures in excess of 2200C. As a result, innovative, high performance thermal protection systems (TPS) are of great demand. Among ultra-high temperature ceramics (UHTC), it is well known that ZrB2- and HfB2-based materials have high melting temperatures and ...
STTR Phase I 2010 Department of DefenseMissile Defense Agency -
Carbon nanotube coatings on electrochemical textured surfaces for advanced adsorptive baffles
SBC: Faraday Technology, Inc. Topic: MDA18T003This proposed STTR program addresses the challenge of developing advanced absorptive baffles to minimize stray and reflected light across the visible and infrared wavebands for exo-atmospheric optical sensors and seeker telescopes. To achieve this goal Faraday Technology and Pacific Northwest National Laboratory will develop electrochemically textured pyramidal surfaces with CNT black coatings as ...
STTR Phase I 2019 Department of DefenseMissile Defense Agency -
CCHAT Handoff Protocol
SBC: SOAR TECHNOLOGY INC Topic: DHA17B002Research has identified that handoffs are particularly important communication processes, during which communication error can lead to patient safety situations. Organizations have created standard practices and training materials to encourage teamwork communication for handoffs, however these do not necessarily capture the needs of military medicine of combat casualty care. Combat casualty handof ...
STTR Phase I 2018 Department of DefenseDefense Health Agency -
Cervical Spine Health Improvement Products
SBC: SWITCHBOX INC Topic: DHA18B001Most standard-of-care tools and techniques for evaluating neck disorders are subjective, unreliable, and do not provide actionable information for providers, payers, and organizations to deliver efficient and effective care. This lack of objective neck he
STTR Phase I 2019 Department of DefenseDefense Health Agency -
Characterization of Piezoelectric Fibers for Sensing Shock Waves from Underwater Explosions
SBC: ADVANCED MATERIALS & DEVICES Topic: DHA17C002This Small Business Technology Transfer (STTR) Phase I effort will demonstrate the feasibility of using piezoelectric fibers to detect shock waves from underwater explosions (UNDEX) and sensing physiological measures such as heart and respiratory rates on warfighters. Piezoelectric fibers will be characterized for their ability so sense different amplitudes and frequencies of shock and vibration. ...
STTR Phase I 2018 Department of DefenseDefense Health Agency -
Combat Casualty Handoff Automated Trainer (CCHAT)
SBC: SOAR TECHNOLOGY INC Topic: DHA17B001Combat casualty handoffs are critical communication moments during which responsibility for the patient and important casualty information is transferred between providers. The nature of these handoffs requires specialized training, for which no standardized framework currently exists. The proposed effort aims to develop a capability, compatible with current DoD systems, that provides caregivers w ...
STTR Phase I 2018 Department of DefenseDefense Health Agency -
Conformal Aerodynamic Controls for Supermaneuverable High-Speed Vehicles
SBC: ATA ENGINEERING, INC. Topic: MDA18T002High G Aerodynamic Controls | Approved for Public Release 18-MDA-9707 (3 Jul 18)
STTR Phase I 2019 Department of DefenseMissile Defense Agency