Award Data

Most standard-of-care tools and techniques for evaluating neck disorders are subjective, unreliable, and do not provide actionable information for providers, payers, and organizations to deliver efficient and effective care. This lack of objective neck he

Defense Health Agency (DHA) is seeking a multi-functional diagnostic to determine blood coagulopathy in real time at point-of-care (POC). Blood coagulopathy, resulting in uncontrolled bleeding, is implicated in 80% of operating room deaths and 50% of trau

Traumatic injuries account for 30% of all life years lost in the US and is the leading cause of death for people under 46 years of age. Uncontrolled bleeding or hemorrhage constitute 30-40% of trauma related deaths and are considered to be a major cause o

This Phase II proposal is in response to the Defense Health Agency 2017 SBIR topic 17B-005. The approach is an electrochemical membrane oxygen pump using newly developed nano-thickness membrane technology. The total membrane with all the layers is less

The objective of this proposal is to enable high-sensitivity, passive imaging system of natural mm-wave emissions, which can be used as standalone or fused with other imaging modality such as conventional IR imagery in degraded environments. This is achieved through a unique antenna integrated electro-optic (EO) modulator, where received mm-wave signals modulate an optical carrier. The optical car ...

Defense against chemical weapons is a critical DoD requirement. An effective defense requires the development of unique respirator systems that prevent inhalation of chemical warfare (CW) agents. In addition, the protective equipment exposed to CW agents must not pose a residual hazard after use in the battlefield. Existing respirator canisters remove CW agents, but they do not self-decontaminate ...

Metal Additive Manufacturing (AM) research has typically addressed understanding how to maximize performance for an AM material, taking into account microstructural anisotropy, residual stress, defects (such as pores and lack of fusion defects), and surface finish. Optimizing a part then requires significant post processing such as hot isostatic pressing (HIP), heat treatment and surface finishing ...

There is a need for easy-to-use, versatile alloys for additive manufacturing that print consistently regardless of the specific process or machine, or the metallurgical and manufacturing knowledge of the user. Such capability is especially critical for soldiers to be able to make every day items on demand in the theater of war. Toward meeting this need, recent successes developing high performance ...

The Key to further improving the data rate in data communication while minimizing the power consumption is to improve the linearity of a power amplifiers in the system. Carbon Nanotube (CNT) offer intrinsically linear behavior, but to realize advanced linearity in a practical device requires high quality CNT material, and a fabrication process that can take the full advantage of the superior prope ...

In this project, we propose to develop a high-performance carbon nanotube (CNT) based millimeter-wave transistor technology and demonstrate monolithic millimeter-wave integrated circuits (MMICs) based on this technology with improved power efficiency, linearity, noise and dynamic range performance over existing GaAs, SiGe and RF-CMOS technologies. The goal of this topic is to leverage Professor St ...