You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Repair of Materials Degradation in Light Water Reactor Components

    SBC: UES SERVICES INC            Topic: 08c

    Corrosion induced degradation of material components in the harsh environment of light water reactor can impact reactor reliability, availability, safe operation and eventually life. A possible remedy could be to replace the replaceable components at appropriate moments which may not be economically favorable. Thus there is a need to develop technologies to repair degraded materials. STATEMENT OF ...

    STTR Phase II 2016 Department of Energy
  2. Low-cost, Time-resolved Chemical Characterization of Atmospheric Aerosols

    SBC: AEROSOL DEVICES INC            Topic: 23b

    The composition of atmospheric particulate matter (“aerosols”) strongly influences health and environmental impacts, but there exist few time-resolved, long-term records of particle-phase chemical composition due to lack of appropriate monitoring tools. Needed is an instrument that is robust, easy-to-operate, with automated calibrations and data reduction, to provide operationally-inexpensive ...

    STTR Phase II 2019 Department of Energy
  3. Permanent Magnet (PM) Induction Heater for Paraffin Abatement

    SBC: AUSTIN GEOTECH SERVICES INC            Topic: 20b

    There are an estimated 1.7 million oil and gas wells in the United States, 771,000 of these are considered marginal producers. Combined they make up 11.3% of the US oil production and 8.3% of the US gas production. In that last 10 years, over 131,000 of these oil wells and 48,000 gas wells have been plugged and abandoned. Most of these wells suffer from paraffin plugging problems. The only way to ...

    STTR Phase II 2019 Department of Energy
  4. Advanced Printed Circuit Board Design Methods for Compact Optical Transceiver

    SBC: VOXTEL, INC.            Topic: A15AT001

    To meet the U.S. military needs for hardened laser-ranging sensors for munitions applications, a compact, high-repetition-rate, high-pulse-energy laser rangefinder will be developed consisting of a temperature-stabilized avalanche photodiode (APD) receiver, with a few photons equivalent sensitivity, and a miniature diode-pumped microchip laser. An existing integrated circuit design will be updated ...

    STTR Phase II 2016 Department of DefenseArmy
  5. Flow Battery Structures to Improve Performance and Reduce Manufacturing Cost

    SBC: Faraday Technology, Inc.            Topic: 21d

    Redox flow batteries are a promising technology for electrical energy storage for renewable energy sources; however traditional redox flow batteries are limited in their use due to non-uniform pressure drops and mass transfer limitations, as well as high manufacturing costs related to the felt material costs for the electrode and component alignment challenges during manufacturing.General Statemen ...

    STTR Phase II 2013 Department of Energy
  6. Automated Solver Selection for Nuclear Engineering Simulations

    SBC: RNET TECHNOLOGIES INC            Topic: 32d

    An important objective of the NEAMS program is to enable widespread use of the software tools among the industry, academia, and regulatory communities. For solving the problems occurring at various stages of NEAMS simulations, typically there are several possible choices for numerical subroutines. Furthermore, the best method for a numerical problem may also evolve over the course of the simulatio ...

    STTR Phase II 2016 Department of Energy
  7. A Multi-channel Radiation-tolerant, Low-power, High-speed, and Resolution Analog-to-Digital Converter for Nuclear Physics Detectors

    SBC: APOGEE SEMICONDUCTOR, INC.            Topic: 28b

    Cost-effective and power-efficient radiation tolerant semiconductors are needed in various harsh environments, such as particle detectors, communication satellites, high-altitude avionics and medical imagining equipment. These include amplifiers, voltage regulators, analog-to-digital converters (ADCs) and digital logic circuitry. However, radiation-tolerant high-speed ADCs currently cost more than ...

    STTR Phase II 2019 Department of Energy
  8. High Performance Substrate Embedded Microgrids for High Efficiency, Flexible Organic Light Emitting Diodes

    SBC: ELECTRONINKS INCORPORATED            Topic: 09b

    Indium tin oxide (ITO) films are currently the most widely used transparent conductor in optoelectronic applications. However, ITO suffers from several major technological and economic limitations for large area applications such as inadequate performance, high cost, and brittleness. The primary objective of this Small Business Technology Transfer (STTR) Phase I/Phase II project is to develop the ...

    STTR Phase II 2019 Department of Energy
  9. REBCO Coated Conductor Cables for Fusion Magnets

    SBC: ADVANCED CONDUCTOR TECHNOLOGIES LLC            Topic: 22c

    The feasibility for fusion as a practical energy source needs to be enhanced significantly by removing some of the restrictions that low-temperature superconductors put on the fusion magnet systems. This can be done by using high-temperature superconductors, allowing for much larger temperature margins, a higher magnet performance and less mechanical degradation during operation. There are curren ...

    STTR Phase II 2013 Department of Energy
  10. Pulse Voltammetry Tools for Accurate and Rapid Analysis of Batteries

    SBC: CFD RESEARCH CORPORATION            Topic: A152092

    Pulse voltammetry techniques, coupled with model-based analysis tools, provide a number of advantages for quantitative analysis of electrochemically active materials that govern the performance of batteries and fuel cells. In prior Phase I and II research, CFD Research developed and validated computational models in software that reads voltammogram data from laboratory instruments; predicts the re ...

    STTR Phase II 2019 Department of DefenseArmy
US Flag An Official Website of the United States Government